Dell Precision T7400 User's Guide - Page 185
Insert the riser cards into the connectors until both riser cards snap into
View all Dell Precision T7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
11 Ensure that memory riser card 3 is above system-board connector DIMM_3 and memory riser card 4 is above system-board connector DIMM_4. Align the notch on the bottom of each riser card with the crossbar in each system-board connector. 12 Insert the riser cards into the connectors until both riser cards snap into position. 1 2 1 memory riser cards 1 and 2 2 memory riser cards 3 and 4 NOTE: If a memory-riser power cable is not plugged in, the system will not boot. 13 Connect the power cables back into memory riser cards 3 and 4. 14 Ensure that memory riser card 1 is above system-board connector DIMM_1 and memory riser card 2 is above system-board connector DIMM_2. Align the notch on the bottom of each riser card with the crossbar in each system-board connector. Adding and Replacing Parts 185