Dell Precision T7400 User's Guide - Page 192
Connect the power cables to memory riser cards 3 and 4.
View all Dell Precision T7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
10 Ensure that memory riser card 3 is above system-board connector DIMM_3 and memory riser card 4 is above system-board connector DIMM_4. Align the notch on the bottom of each riser card with the crossbar in each system-board connector. 11 Insert the riser cards into the connectors until both riser cards snap into position. NOTE: If a memory-riser power cable is not plugged in, the system will not boot. 1 2 3 1 power connectors 3 securing clips (2) 2 connector 12 Connect the power cables to memory riser cards 3 and 4. 13 Ensure that memory riser card 1 is above system-board connector DIMM_1 and memory riser card 2 is above system-board connector DIMM_2. Align the notch on the bottom of each riser card with the crossbar in each system-board connector. 192 Adding and Replacing Parts