Dell Precision T7400 User's Guide - Page 202
Removing an Expansion Card, Integrated NIC
View all Dell Precision T7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
18 If you installed a network adapter card and want to disable the integrated network adapter: a Enter system setup, select Integrated NIC, and then change the setting to Off. b Connect the network cable to the network adapter cards connectors. Do not connect the network cable to the network connector on the back panel. 19 Install any drivers required for the card as described in the card documentation. Removing an Expansion Card 1 Follow the procedures in "Before You Begin" on page 139. CAUTION: Your computer is heavy (it has an approximate minimum weight of 55 lbs) and can be difficult to maneuver. Seek assistance before attempting to lift, move, or tilt it; this computer requires a two-man lift. Always lift correctly to avoid injury; avoid bending over while lifting. See your Product Information Guide for other important safety information. CAUTION: The computer stand should be installed at all times to ensure maximum system stability. Failure to install the stand could result in the computer tipping over, potentially resulting in bodily injury or damage to the computer. 2 Remove the computer cover (see "Removing the Computer Cover" on page 141). 202 Adding and Replacing Parts