Dell Precision T7400 User's Guide - Page 206
Reconnect the data cable to each installed hard drive., its tab clicks into place.
View all Dell Precision T7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
NOTICE: Do not route card cables behind the cards. Cables routed behind the cards could cause damage to the equipment. 8 Connect any cables that should be attached to the card. See the documentation for the card for information about the card's cable connections. 9 Rotate the card retainer back into its original position; push its tip so that its tab clicks into place. 1 2 1 release tab 2 card retainer 10 Reconnect the data cable to each installed hard drive. 11 Reconnect the hard drive power cable to each installed hard drive. 12 Ensure that all connectors are properly cabled and firmly seated. 13 Press the card retention device back into its original position; push it down until it clicks into place. 206 Adding and Replacing Parts
206
Adding and Replacing Parts
NOTICE:
Do not route card cables behind the cards. Cables routed behind the
cards could cause damage to the equipment.
8
Connect any cables that should be attached to the card.
See the documentation for the card for information about the card’s cable
connections.
9
Rotate the card retainer back into its original position; push its tip so that
its tab clicks into place.
10
Reconnect the data cable to each installed hard drive.
11
Reconnect the hard drive power cable to each installed hard drive.
12
Ensure that all connectors are properly cabled and firmly seated.
13
Press the card retention device back into its original position; push it down
until it clicks into place.
1
release tab
2
card retainer
1
2