Dell Precision T7400 User's Guide - Page 239

14 If the drive you just installed is the primary drive, insert bootable disc into drive A. 15 Turn on the computer. 16 Enter system setup, and update the appropriate Drive option (see "System Setup" on page 75). 17 Exit system setup, and reboot the computer. 18 Partition and logically format your drive before you proceed to the next step. See the documentation for your operating system for instructions. 19 Test the hard drive by running the Dell Diagnostics. See "Dell Diagnostics" on page 123. 20 If the drive you just installed is the primary drive, install your operating system on the hard drive. Removing a Fifth SATA Hard Drive (Optional) CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover. 1 Follow the procedures in "Before You Begin" on page 139. CAUTION: Your computer is heavy (it has an approximate minimum weight of 55 lbs) and can be difficult to maneuver. Seek assistance before attempting to lift, move, or tilt it; this computer requires a two-man lift. Always lift correctly to avoid injury; avoid bending over while lifting. See your Product Information Guide for other important safety information. CAUTION: The computer stand should be installed at all times to ensure maximum system stability. Failure to install the stand could result in the computer tipping over, potentially resulting in bodily injury or damage to the computer. 2 Remove the computer cover (see "Removing the Computer Cover" on page 141). 3 Remove the drive panel (see "Removing the Drive Panel" on page 246). 4 Disconnect the power cable from the back of the hard drive. Adding and Replacing Parts 239