Dell Precision T7400 User's Guide - Page 247
Removing a Drive-Panel Insert, Pivot the drive panel outward and lift it from its side hinges.
View all Dell Precision T7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 247 highlights
1 2 4 3 1 sliding-plate lever 3 drive panel 2 sliding-plate 4 drive-panel tabs 4 Pivot the drive panel outward and lift it from its side hinges. 5 Set the drive panel aside in a secure location. Removing a Drive-Panel Insert NOTICE: Drive-panel inserts may contain screws on the inside. You can attach the screws to new drives that do not have any screws. 1 Remove the drive panel (see "Removing the Drive Panel" on page 246). NOTICE: To avoid breaking the drive-panel insert tab, do not pull the insert more than approximately 1 cm (½ inch) away from the drive panel before sliding the tab out of the slot. Adding and Replacing Parts 247
Adding and Replacing Parts
247
4
Pivot the drive panel outward and lift it from its side hinges.
5
Set the drive panel aside in a secure location.
Removing a Drive-Panel Insert
NOTICE:
Drive-panel inserts may contain screws on the inside. You can attach the
screws to new drives that do not have any screws.
1
Remove the drive panel (see "Removing the Drive Panel" on page 246).
NOTICE:
To avoid breaking the drive-panel insert tab, do not pull the insert more
than approximately 1 cm (½ inch) away from the drive panel before sliding the tab
out of the slot.
1
sliding-plate lever
2
sliding-plate
3
drive panel
4
drive-panel tabs
3
1
2
4