Dell Precision T7400 User's Guide - Page 272
Disconnect its power cable., fan and the memory-riser support structure.
View all Dell Precision T7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 272 highlights
2 Remove the computer cover (see "Removing the Computer Cover" on page 141). 3 Remove the memory shroud by loosening its two thumbscrews and lifting it from the computer. 2 1 3 1 memory shroud 3 memory fan (only present on systems without memory riser cards) 2 thumbscrews (2) 4 Lift to remove the memory risers, if installed. 5 If a graphics riser card is installed, remove it: a Remove its four screws. b Disconnect its power cable. c Move it slightly up and to the right at an angle to free it from the card fan and the memory-riser support structure. d Set the riser aside. 272 Adding and Replacing Parts
272
Adding and Replacing Parts
2
Remove the computer cover (see "Removing the Computer Cover" on
page 141).
3
Remove the memory shroud by loosening its two thumbscrews and lifting
it from the computer.
4
Lift to remove the memory risers, if installed.
5
If a graphics riser card is installed, remove it:
a
Remove its four screws.
b
Disconnect its power cable.
c
Move it slightly up and to the right at an angle to free it from the card
fan and the memory-riser support structure.
d
Set the riser aside.
1
memory shroud
2
thumbscrews (2)
3
memory fan (only present on systems without
memory riser cards)
1
2
3