Dell Precision T7400 User's Guide - Page 77
Internal, Read Only, Controller, Drive ID, On w/RPL, On w/ PXE, Onboard Devices
View all Dell Precision T7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Diskette Drive (Internal default) SATA 0 through 2 (On default) SATA Operation (AHCI default) SMART Reporting (Off default) Enables and disables the floppy drives and sets read permission for the internal floppy drive. Off disables all floppy drives. USB disables the internal diskette drive and enables a USB floppy drive, if the USB controller is enabled and a USB drive is connected. Internal enables the internal floppy drive. Read Only enables the internal drive controller and allows the internal floppy drive read-only permission. NOTE: Operating systems with USB support will recognize USB floppy drives regardless of this setting. Enables (On) or disables (Off) a SATA drive. Displays the Controller type (SATA), Port number the drive is using, Drive ID number, and Capacity. Determines the integrated SATA controller's operating mode, which can be either AHCI or ATA. Controls whether errors for integrated drives are reported during startup. Onboard Devices Integrated NIC (On default) Enables or disables the integrated NIC controller. Settings are On, Off, On w/RPL, or On w/ PXE. When the On w/ PXE or the On w/RPL setting is active, if a boot routine is not available from the network server, the computer attempts to boot from the next device in the boot sequence list. Integrated Audio (On default) Enables (On) or disables (Off) the onboard audio controller. You can also select Auto to use the add-in Audio controller. 1394 Controller Enables (On) or disables (Off) a 1394 controller. System Setup 77