Dell Precision T7400 User's Guide - Page 82

Auto Power Time Low Power Mode (Off default) Remote Wakeup (Off default) Suspend Mode Sets time to automatically turn on the computer. Time is kept in the standard 12-hour format (hours:minutes). Change the startup time by pressing the right- or left-arrow key to increase or decrease the numbers, or type numbers in both the date and time fields. When Low Power Mode is selected, remote wakeup events will no longer power up the computer from Hibernate or Off via the onboard network controller. This option allows the system to power up when a Network Interface Controller (NIC) or Remote Wakeup-capable modem receives a wake up signal. On is the default setting. On w/ Boot to NIC will allow the computer to attempt to boot from a network prior to using the boot sequence. NOTE: Normally, the system can be powered up remotely from suspend mode, hibernate mode, or when powered off. When Low Power Mode (in the Power Management menu) is enabled, the system can only be powered up remotely from Suspend. Sets the computer's suspend mode. The options are S1, a suspend state in which the computer is running in a lowpower mode, and S3, a suspend state in which the power is reduced or turned off for many components, however, system memory remains active. Maintenance Service Tag ASF Mode SERR Message (On default) Displays the service tag for your computer. Controls ASF management. • On = Full ASF 2.0 functionality (RMCP) • Alert Only - send ASF messages on event or error • Off - all ASF functionality disabled Some graphics cards require that the SERR message be disabled. 82 System Setup