Dell S3048-ON EMC Networking with Isilon Front-End Deployment and Best Practic
Dell S3048-ON Manual
View all Dell S3048-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell S3048-ON manual content summary:
- Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 1
Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide Dell EMC Networking Infrastructure Solutions June 2018 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 2
of their respective owners. Published in the USA 6/25/2018 Dell believes the information in this document is accurate as of its publication date. The information is subject to change without notice. 2 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 3
Dell EMC Networking S3048-ON ...8 2.2 Dell EMC Networking S4048-ON ...8 2.3 Dell EMC Networking Z9100-ON...8 2.4 Dell EMC PowerEdge R730xd ...8 2.5 Dell EMC commands ...58 8.2 OS9 Validation commands ...63 3 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 4
Validation ...74 A Validated hardware and components...76 A.1 Dell EMC Networking Switches ...76 A.2 Dell EMC Isilon Array ...76 A.3 Dell EMC PowerEdge Servers ...76 B Product Manuals and technical guides ...77 C Support and feedback ...78 4 Dell EMC Networking with Isilon Front-End Deployment and - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 5
2 and Layer 3 protocol stack and services, which brings forth the ability for open programmability and portability. This allows for greater utilization of Dell EMC's Open Networking, in this guide we will utilize Dell EMC Networking operating systems. 5 Dell EMC Networking with Isilon Front-End - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 6
industry and supported on a large crosssection of the currently-shipping portfolio. This document encompasses the use of both operating systems within the same network architecture. The Dell EMC S4048-ON will be used as leaf switches, and the Dell EMC Z9100-ON will be used in this guide as a spine - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 7
configuration file attachments. To access attachments in Adobe Acrobat Reader, click the icon in the left pane halfway down the page, then click the icon. 7 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 8
S4048-ON Dell EMC Networking Z9100-ON The Dell EMC Networking Z9100-ON is a 1RU, multilayer switch with thirty-two ports supporting 10/25/40/50/100GbE as well as two 10GbE ports. The Z9100-ON is used as a spine in this guide. 2.4 Dell EMC Networking Z9100-ON Dell EMC PowerEdge R730xd The Dell EMC - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 9
Isilon storage. 2.6 Dell EMC PowerEdge R640 Isilon X210 The Dell EMC Isilon X210 is a 2-RU, scale-out NAS system. The Isilon X210 is used to create a storage cluster to support an SMB share in this guide. Dell EMC Isilon X210 front view Dell EMC Isilon X210 rear view 9 Dell EMC Networking with - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 10
is cabled similarly. This can be seen in Figure 9 below, all equipment in other racks is configured in a similar fashion. Management configurations for rack 1 10 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 11
(routed). The terms "layer 3 topology" and "layer 2 topology" in this guide refer to these connections. In both topologies, downstream connections to servers, storage and other for very large networks. 11 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 12
• Configuring each leaf pair in a Virtual Link Trunking (VLT). • Dell EMC recommends that RSTP always is configured as a best practice. Although configuring VLT 380/160 4.750 : 1 3.167 : 1 2.375 : 1 12 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 13
-spine is a configuration of up to 16 racks. The Dell/EMC Z9100-ON has thirty-two 40/100GbE interfaces that would support 16 leaf pairs using VLT. This provides one rack that for proper scaling. 13 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 14
are layer 2. Connections to external networks are made from a pair of edge or border leafs as shown in Figure 12. Layer 3 leaf-spine network 14 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 15
are also layer 2. For connections to external networks, layer 3 links are added between the spines and a pair of edge leafs. Layer 2 leaf-spine network 15 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 16
the ASN assignments used for leaf and spine switches in the BGP examples in this guide. 5.2 BGP ASN assignments ASNs should follow a logical pattern for ease of administration in the example provided. 16 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 17
/1/49 .3 D Leaf 2 Eth1/1/50 .3 192.168.1.0/31 Spine 1 192.168.2.0/31 Spine 2 192.168.1.2/31 Spine 1 192.168.2.2/31 Spine 2 Eth1/1/1 .0 Eth1/1/1 .0 Eth1/1/2 .2 Eth1/1/2 .2 17 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 18
.2.4/31 Spine 2 192.168.1.6/31 Spine 1 192.168.2.6/31 Spine 2 Eth1/1/3 .4 Eth1/1/3 .4 Eth1/1/4 .6 Eth1/1/4 .6 The point-to-point IP addresses used in this guide are shown in Figure 16: Point-to-point IP addresses 18 Dell EMC Networking with Isilon Front-End Deployment and Best Practices - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 19
topology are listed in the attachments section. Configuration of Z9100-ON OS10EE Spine Switches The configuration of the example used in this guide will begin with the two Z9100-ON's Spine1 and Spine2 as seen in Figure 18. 19 Dell EMC Networking with Isilon Front-End Deployment and Best Practices - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 20
In this example, each of the connections from the Z9100-ON spine to the S4048-ON leaf switches needs to supports and recommends the use of jumbo frames. Each interface used below will be configured using jumbo frames. 20 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 21
168.1.6/31 interface loopback0 description "Router ID" no shutdown ip address 10.0.1.1/32 Z9100-ON Spine 2 interface breakout 1/1/1 map 40g-1x interface breakout 1/1/2 map 40g- used as router IDs. 21 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 22
-map spine-leaf permit 10 match ip address prefix-list spine-leaf Z9100-ON Spine 2 route-map spine-leaf permit 10 match ip address overhead. Finally, exit configuration mode and save the configuration. 22 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 23
192.168.1.7 inherit template spine-leaf remote-as 64704 no shutdown end write memory Z9100-ON Spine 2 router bgp 64602 bestpath as-path multipath-relax graceful-restart role next as seen in Figure 19. 23 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 24
in the following table: Interface enumeration Server/Isilon Node Switch Node 01-1 Leaf 1 Leaf 2 Node 01-2 Leaf 1 Leaf 2 Leaf interface ethernet 1/1/1 ethernet 1/1/1 ethernet 1/1/3 ethernet 1/1/3 24 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 25
to a value of 9216. Isilon's OneFS supports and recommends the use of jumbo frames. Note: Refer to Isilon Network Design Considerations for more information on specific protocols as they relate to OneFS. 25 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 26
EMC Leaf-Spine Deployment Guide and Dell EMC Networking L3 Design for Leaf-Spine with OS10EE. Configure the necessary port channels. There will be one port channel for each server as well as a single port channel for each of the Isilon nodes. Each port channel is assigned an MTU of 9216 to support - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 27
host interfaces that support flow control. In OS10EE this is enabled by default, in OS9 it must be configured. Flow control commands are added below for reference; however, they are not required in OS10EE. 27 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 28
spine switches are configured. Assign IP addresses per Table 3. Configure a loopback interface to be used as the router ID. This is used with BGP. 28 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 29
ge 24 Uplink Failure Detection (UFD) is configured next. UFD is a feature that shuts down specified downstream interfaces when all specified uplinks become disabled. 29 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 30
, they will advertise them in batched intervals of one second. This delay is to prevent overhead. Finally, exit configuration mode and save the configuration. 30 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 31
.1.2 inherit template spine-leaf remote-as 64601 no shutdown neighbor 192.168.2.2 inherit template spine-leaf remote-as 64602 no shutdown end write memory 31 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 32
in this example can be found in the following table: Interface enumeration Server/Isilon Node Switch Leaf interface Node 01-4 Leaf 3 tengigabitethernet 1/1/1 Leaf 4 tengigabitethernet 1/1/1 32 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 33
only utilized for the VLT heartbeat. Once VLT is enabled, it will dynamically change the MTU settings for the VLTi to a value of 9216. 33 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 34
the next section. Dell recommends asymmetrical flow support flow control. In OS10EE this is enabled by default, in OS9 it must be configured. Flow Control is configured with the flowcontrol rx on tx off command. 34 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 35
off interface tengigabitethernet 1/19 description "Server 4-2" no shutdown port-channel-protocol LACP port-channel 102 mode active mtu 9216 flowcontrol rx on tx off 35 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 36
for each of the Isilon nodes. Each port channel is assigned an MTU of 9216 to support jumbo frames. The vlt-port-channel # command enables port channels on VLT peers to function as a single port channel. 36 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 37
is configured as 172.16.2.254/24. The virtual address assigned to the VRRP group will provide fault tolerance if either leaf goes offline. 37 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 38
command seq 20 permit 172.16.0.0/16 ge 24 includes the 172.16.1.0/24 network used on Leafs 1 and 2 as shown in Figure 14. 38 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 39
to a destination to add to the routing table. This number should be equal to or greater than the number of spines, up to 64. 39 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 40
.168.1.6 no shutdown neighbor 192.168.2.6 remote-as 64602 neighbor 192.168.2.6 peer-group spine-leaf neighbor 192.168.2.6 no shutdown end write memory 40 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 41
topology are listed in the attachments section. Configuration of Z9100-ON OS10EE Spine Switches The configuration of the example used in this guide will begin with the two Z9100-ON's Spine1 and Spine2 as seen in Figure 22. 41 Dell EMC Networking with Isilon Front-End Deployment and Best Practices - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 42
that the root bridge will always be one of the spine switches. Z9100-ON Spine 1 configure terminal hostname Z9100-Spine1 interface mgmt 1/1/1 no ip address dhcp no shutdown ip address 100 value of 9216. 42 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 43
the speed set to 40GbE. Z9100-ON Spine 1 interface breakout 1/1/1 map 40g-1x interface breakout 1/1/2 map 40g-1x Z9100-ON Spine 2 interface breakout 1/1/1 map 40g-1x interface breakout 1/1/2 map 40g-1x 43 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 44
no shutdown no switchport channel-group 50 mode active mtu 9216 end write memory Z9100-ON Spine 2 interface breakout 1/1/3 map 40g-1x interface breakout 1/1/4 map 40g active mtu 9216 end write memory 44 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 45
S4048-ON OS10EE Leaf Switches Configurations of Leaf 1 and Leaf 2 running OS10EE will be shown next as seen in Figure 23. OS10EE Leaf pair 45 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 46
peer routing on each switch. Once VLT is enabled, it will dynamically change the MTU settings for the VLTi to a value of 9216. Isilon's OneFS supports and recommends the use of jumbo frames. 46 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 47
is assigned an MTU of 9216 to support jumbo frames, as well configured to allow access to VLAN 100. The vlt-port-channel # command enables port channels on VLT peers to function as a single port channel. 47 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 48
host interfaces that support flow control. In OS10EE this is enabled by default, in OS9 it must be configured. Flow control commands are added below for reference; however, they are not required in OS10EE. 48 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 49
mode active no switchport mtu 9216 flowcontrol receive on flowcontrol transmit off Next, Configure the upstream port channels as well as the corresponding interfaces. 49 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 50
configuration. 7.3 Configuration of S4048-ON OS9 Leaf Switches Configurations in this section cover the leaf switches 3 and 4 running OS9 as seen in Figure 24. 50 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 51
1/1/1 Leaf 4 tengigabitethernet 1/1/1 Node 01-5 Leaf 3 tengigabitethernet 1/1/3 Leaf 4 tengigabitethernet 1/1/3 Node 01-6 Leaf 3 tengigabitethernet 1/1/5 Leaf 4 tengigabitethernet 1/1/5 51 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 52
designate the primary VLT member. Once VLT is enabled, it will dynamically change the MTU settings for the VLTi to a value of 9216. Isilon's OneFS supports and recommends the use of jumbo frames. 52 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 53
the next section. Dell recommends asymmetrical flow support flow control. In OS10EE this is enabled by default, in OS9 it must be configured. Flow Control is configured with the flowcontrol rx on tx off command. 53 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 54
an MTU of 9216 to support jumbo frames. The vlt-peer-lag-port-channel # command ensures that each switch in the VLT is aware of all port channels and can act accordingly in the event of a switch failure. 54 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 55
rstp edge-port interface port-channel102 description "Server 4" no shutdown switchport mtu 9216 vlt-peer-lag port-channel 102 spanning-tree rstp edge-port 55 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 56
-channel 1,3,5,101,102 tagged port-channel 50 Uplink Failure Detection (UFD) is configured next. UFD shuts down all downstream interfaces if all uplinks fail. 56 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 57
downstream port-channel102 upstream port-channel 50 end write memory Finally, exit configuration mode and save the configuration with the end and write commands. 57 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 58
networks in this example, 10.60.1.0 and 172.16.1.0, each have two paths from Z9100-Spine1, one through each leaf. The first set of routes with a subnet mask of /32 are the IPs configured for router IDs. 58 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 59
statement in the BGP configuration is equal to or greater than the number of spines in the topology. Z9100-Spine1# show ip route bgp Codes: C - connected S - static B - BGP, IN - via 192.168.2.0 59 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 60
be up. S4048-Leaf1# show vlt 127 vlt-port-detail vlt-port-channel ID : 1 VLT Unit ID Port-Channel Status Configured ports Active ports 60 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 61
in this topology. Status: Enabled, Up indicates UFD is enabled and no interfaces are currently disabled by UFD. S4048-Leaf1# show uplink-state-group 1 61 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 62
1000 FWD 0 AUTO Yes port-channel3 Desg 128.2519 128 1000 FWD 0 AUTO Yes port-channel5 Desg 128.2521 128 1000 FWD 0 AUTO Yes 62 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 63
appear, make sure the maximum-paths statement in the BGP configuration is equal to or greater than the number of spines in the topology. 63 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 64
32768 Up Up Up 0 6(8) f4:8e:38:2e:a0:f7 f4:8e:38:2e:76:f7 6(8) 90 seconds 60 seconds Enabled 0 seconds 150 seconds 64 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 65
(Sts column shows FWD). One of the leaf switches (S4048-Leaf1 in this example) is the root bridge, and severfacing interfaces are edge ports. 65 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 66
vrrp brief Interface Group Pri Pre State Master addr Virtual addr(s) Description Vl 200 IPv4 200 150 Y Master 172.16.2.252 172.16.2.254 66 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 67
section. Isilon configuration parameters Parameter Value Option [ 1] Create a new cluster Configure root/admin passwords "password" Configuration Name Cluster-01 Cluster Encoding [ 8] UTF-8 67 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 68
170.254 SmartConnect Zone name Mgmtzone1 SmartConnect service IP 100.67.170.149 DNS servers 100.67.10.1 Search domain dell.local Cluster date and time Default Cluster in the cluster creation. 68 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 69
for the ext-1 interface, https://100.67.170.140:8080. This will bring you to the first node in the cluster. OneFS Web GUI 69 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 70
pool. 8. Set the SmartConnect Zone name, sczone1. 9. Set the SmartConnect Service subnet, subnet1. 10. Ensure that the Aggregation Mode is set to LACP. 11. Complete steps 4-10 to create pool2 in subnet2. 70 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 71
.1.254 2. Navigate Network configurations>subnet2>pool2, Add static route to subnet 1. Parameter Subnet Netmask Gateway Value 172.16.1.0 255.255.255.0 172.16.2.254 71 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 72
File System > File System Explorer. 2. Select Create Directory. 3. Define the directory name, "SMB," as well as the user, group, and permission settings as shown. 72 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 73
was configured previously for the SmartConnect zones is required. This section will cover the completion of the SmartConnect configuration. 1. Login to the DNS server. 73 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 74
have a name that matches the SmartConnect zone. This will ensure that a connection to sczone1.dell.local will reference the SmartConnect Zone 1 IP of 172.16.1.249. When this IP is to the opposite subnet. 74 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 75
verify read/write permissions. 3. Login to Server04 and issue the Run command \\sczone1.dell.local. This will display the same folder, and the previously created files will be to \\sczone1.dell.local. 75 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 76
and components The following tables list the hardware and components used to configure and validate the example configurations in this guide. Dell EMC Networking Switches Qty Item 2 Z9100-ON 2 S4048-ON 2 S4048-ON 1 S3048-ON OS/Firmware version OS OS OS OS 10.4.0 R3 10.4.0 R3 9.13 (0.0) 9.13 - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 77
and documentation for PowerEdge R730xd Manuals and documentation for PowerEdge R640 Isilon OneFS Isilon X210 Installation Guide Create a New NIC Team on a Host Computer or VM Microsoft's DNS Resource Record Management Dell EMC Leaf-Spine Deployment Guide Dell EMC Networking L3 Design for Leaf - Dell S3048-ON | EMC Networking with Isilon Front-End Deployment and Best Practic - Page 78
Support Support Contact Information Web: http://support.dell.com/ Telephone: USA: 1-800-945-3355 Feedback for this document We encourage readers to provide feedback on the quality and usefulness of this publication by sending an email to [email protected]. 78 Dell EMC
Dell EMC Networking with Isilon Front-End
Deployment and Best Practices Guide
Dell EMC Networking Infrastructure Solutions
June 2018