Dell STREAK mobile Information Update Dell Latitude 10 - ST2/ST2E

Information Update

Dell Latitude 10 – ST2/ST2E

Creating A Bootable USB Flash Drive

Dell Latitude 10–ST2 and Dell Latitude 10–ST2E

computers only support booting to

32-bit UEFI

images. These computers

are built around a 32–bit CPU core and do not support booting from a 64-bit UEFI. The methods available on various

support forums and support sites only discuss how to build 64-bit UEFI images. However, these 64-bit UEFI images do not

work on

Dell Latitude 10–ST2/ST2E

computers.

DVD images to boot to USB optical disk drives on the Dell Latitude 10–ST2/ST2E computers must also be built for 32-bit

UEFI booting.

Complete the following procedure to create a bootable image for

Dell Latitude 10–ST2/ST2E

computers. This setup can

run from any local system running Windows 7.

NOTE:

Ensure the USB flash drive is USB 2.0-compliant and has a capacity of 4 GB or larger.

NOTE:

Following methods have been verified to work on

Dell Latitude 10–ST2

computers with

A02 BIOS

.

Creating a Bootable USB Flash Drive for Windows 8 PE

(Preinstallation Environment)

To create a bootable USB flash drive for Windows 8 PE:

1.

Download the

Windows 8 Assessment and Deployment Kit

(ADK) from:

www.microsoft.com/en-us/download/

details.aspx?id=30652

.

2.

Install the ADK and ensure that the PE option is selected during the install setup.

3.

Run the ADK command processor as an administrator.

4.

Navigate to

C:\Program Files (x86)\Windows Kits\8.0\Assessment and Deployment Kit\Windows Preinstallation

Environment

.

5.

Run the command,

CopyPE x86 X:\Path

.

Here, X is any drive on the local computer. The path must be a new folder name for the PE output folder. Use a

folder name that does not exist. The script extracts the output to the destination folder.

For example,

CopyPE x86 C:\Win8PE

.

The script displays an error if output folder name already exists.

6.

After

CopyPE

command completes, run the

MakeWinPEMedia cmd /UFD X:\Path Y:

.

Here, X is the local drive and the path is the folder that was used for

CopyPE

and

Y:

is the drive letter for the USB

flash drive.

For example,

MakeWinPEMedia /UFD C:\Win8PE E:

.

For more command-line options, run

MakeWinPEMedia /?

.

7.

After the script completes, the USB drive is ready to boot to

Windows 8 PE

.

8.

To customize

Windows PE

, follow Microsoft’s documentation on the ADK.

2013 - 04