Dell Studio One 19 Service Manual

Dell Studio One 19 Manual

Get Dell Studio One 19 PDF manuals and user guides View all Dell Studio One 19 manuals
Add to My Manuals
Save this manual to your list of manuals

Dell Studio One 19 manual content summary:

  • Dell Studio One 19 | Service Manual - Page 1
    Dell Studio One 19/1909 Service Manual Technical Overview Before You Begin Computer Cover Shield Microphone Stand Memory Module(s) Back I/O Panel Processor Fan and Heat Sink Processor Speakers Drives Cards Inverter System Fan and Heat Sink Assembly Side I/O Panel Power Supply Unit Battery System
  • Dell Studio One 19 | Service Manual - Page 2
    Back to Contents Page Before You Begin Dell Studio One 19/1909 Service Manual Recommended Tools Turning Off Your Computer Safety Instructions This chapter provides procedures for removing and installing the components in your computer. Unless otherwise noted, each procedure assumes that the
  • Dell Studio One 19 | Service Manual - Page 3
    and hold the power button while the system is unplugged to ground the system board. CAUTION: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the computer. While you work, periodically touch an unpainted metal
  • Dell Studio One 19 | Service Manual - Page 4
    Dell Studio One 19/1909 Service Manual Removing the WLAN Card Replacing the WLAN Card Removing the RF Module Replacing the RF Module WARNING: Before working inside your computer, read the safety information that shipped with your computer the card. 1. Follow the instructions in Before You Begin. 2.
  • Dell Studio One 19 | Service Manual - Page 5
    safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 1. Follow the instructions in Before You Begin. 2. Remove the computer cover (see Removing the Computer Cover). 3. Remove the shield (see Removing the Shield). 4. Remove the stand
  • Dell Studio One 19 | Service Manual - Page 6
    drive (see Replacing the Optical Drive). 6. Replace the right speaker (see Replacing the Right Speaker). 7. Replace the processor fan (see Replacing the Processor Fan). 8. Replace the back I/O panel (see Replacing the Back I/O Panel). 9. Replace the stand (see Replacing the Stand). 10. Replace
  • Dell Studio One 19 | Service Manual - Page 7
    Back to Contents Page Battery Dell Studio One 19/1909 Service Manual Removing the Battery Replacing the Battery WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance
  • Dell Studio One 19 | Service Manual - Page 8
    the shield (see Replacing the Shield). 5. Replace the computer cover (see Replacing the Computer Cover). 6. Connect your computer and devices to electrical outlets, and then turn them on. 7. Enter system setup (see System Setup) and restore the settings you recorded in step 1. Back to Contents
  • Dell Studio One 19 | Service Manual - Page 9
    Back to Contents Page Computer Cover Dell Studio One 19/1909 Service Manual Removing the Computer Cover Replacing the Computer Cover WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the
  • Dell Studio One 19 | Service Manual - Page 10
    Back to Contents Page
  • Dell Studio One 19 | Service Manual - Page 11
    Back to Contents Page Support Assembly Dell Studio One 19/1909 Service Manual Removing the Support Assembly Replacing the Support Assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see
  • Dell Studio One 19 | Service Manual - Page 12
    from the touch pad connector l touch panel cable from the touch panel module 3. Replace the fourteen screws that secure the support assembly to the LCD panel. 4. Replace the hard drive (see Replacing the Hard Drive). 5. Replace the power supply unit (see Replacing the Power Supply Unit). 6. Replace
  • Dell Studio One 19 | Service Manual - Page 13
    to Contents Page Drives Dell Studio One 19/1909 Service Manual Removing the Hard Drive Replacing the Hard Drive Removing the Optical Drive Replacing the Optical Drive WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
  • Dell Studio One 19 | Service Manual - Page 14
    the documentation that accompanied the drive to verify that the drive is configured for your computer. power cable (ODD_POWER) from the system board and set it aside. 9. Remove the three screws securing the optical drive carrier to the chassis and slide the optical drive carrier out of the computer
  • Dell Studio One 19 | Service Manual - Page 15
    3 optical drive connector 2 optical drive power cable 4 screws (3) 10. Remove the for installation and check the documentation that accompanied the drive to verify that the drive is configured for your computer. 3. Slide the drive into 8. Replace the processor fan (see Replacing the Processor
  • Dell Studio One 19 | Service Manual - Page 16
    9. Replace the back I/O panel (see Replacing the Back I/O Panel). 10. Replace the stand (see Replacing the Stand). 11. Replace the shield (see Replacing the Shield). 12. Replace the computer cover (see Replacing the Computer Cover). Back to Contents Page
  • Dell Studio One 19 | Service Manual - Page 17
    Page Processor Fan and Heat Sink Dell Studio One 19/1909 Service Manual Removing the Heat Sink Replacing the Heat Sink Removing the Processor Fan Replacing the Processor Fan WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional
  • Dell Studio One 19 | Service Manual - Page 18
    of the processor heat sink can cause damage to the system board and processor. 1. Follow the procedures in Before You the Shield). 9. Replace the computer cover (see Replacing the Computer Cover). Removing the Processor Fan WARNING: Do not touch the fan when the computer is powered on. 1. Follow the
  • Dell Studio One 19 | Service Manual - Page 19
    in Before You Begin. 2. Connect the processor fan cable to the connector (CPU_FAN1) on the system board. 3. Replace the three screws securing the processor fan. 4. Replace the shield (see Replacing the Shield). 5. Replace the computer cover (see Replacing the Computer Cover). Back to Contents Page
  • Dell Studio One 19 | Service Manual - Page 20
    Back to Contents Page Inverter Dell Studio One 19/1909 Service Manual Removing the Inverter Replacing the Inverter WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory
  • Dell Studio One 19 | Service Manual - Page 21
    3. Connect the inverter cable to the system board connector (INVERTER). 4. Replace the Fan). 8. Replace the back I/O panel (see Replacing the Back I/O Panel). 9. Replace the stand (see Replacing the Stand). 10. Replace the shield (see Replacing the Shield). 11. Replace the computer cover (Computer
  • Dell Studio One 19 | Service Manual - Page 22
    Dell Studio One 19/1909 Service Manual Removing the Back I/O Panel Replacing the Back I/O Panel WARNING: Before working inside your computer, read the safety information that shipped with your computer I/O panel into the connector (PCIE_4X_1) on the system board until it is securely in place. 3. Replace
  • Dell Studio One 19 | Service Manual - Page 23
    6. Replace the computer cover (see Replacing the Computer Cover). 7. Connect your computer and all attached devices to electrical outlets, and turn them on. Back to Contents Page
  • Dell Studio One 19 | Service Manual - Page 24
    Back to Contents Page Memory Module(s) Dell Studio One 19/1909 Service Manual Removing Memory Module(s) Replacing Memory Module(s) WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the
  • Dell Studio One 19 | Service Manual - Page 25
    10. Check the amount of memory (RAM) listed. Back to Contents Page
  • Dell Studio One 19 | Service Manual - Page 26
    Back to Contents Page Microphone Dell Studio One 19/1909 Service Manual Removing the Microphone Replacing the Microphone WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory
  • Dell Studio One 19 | Service Manual - Page 27
    Back to Contents Page Processor Dell Studio One 19/1909 Service Manual Removing the Processor Replacing the Processor WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory
  • Dell Studio One 19 | Service Manual - Page 28
    for the new processor. CAUTION: Ground yourself by touching an unpainted metal surface or the computer stand. 3. Unpack the new processor. 1 processor when you install the processor. Be careful not to touch or bend the pins on the system board. CAUTION: You must position the processor correctly in
  • Dell Studio One 19 | Service Manual - Page 29
    I/O Panel). 14. Replace the stand (see Replacing the Stand). 15. Replace the shield (see Replacing the Shield). 16. Replace the computer cover (see Replacing the Computer Cover). 17. Connect your computer and all attached devices to electrical outlets, and then turn them on. Back to Contents Page
  • Dell Studio One 19 | Service Manual - Page 30
    Back to Contents Page Power Supply Unit Dell Studio One 19/1909 Service Manual Removing the Power Supply Unit Replacing the Power Supply Unit WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information,
  • Dell Studio One 19 | Service Manual - Page 31
    ) on the system board. 4. Connect the power plug cable to the power supply unit. WARNING: Ensure that the protective grounding cable screw is secure. 5. Replace the stand (see Replacing the Stand). 6. Replace the shield (see Replacing the Shield). 7. Replace the computer cover (see Replacing
  • Dell Studio One 19 | Service Manual - Page 32
    Back to Contents Page Shield Dell Studio One 19/1909 Service Manual Removing the Shield Replacing the Shield WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance
  • Dell Studio One 19 | Service Manual - Page 33
    Dell Studio One 19/1909 Service Manual Removing the Side I/O Panel Replacing the Side I/O Panel WARNING: Before working inside your computer, read the safety information that shipped with your computer and SIDE_BOARD_1) on the system board. 10. Slide the side I/O panel away from the clamps and place
  • Dell Studio One 19 | Service Manual - Page 34
    cables back into position and connect them to the connectors (F_AUDIO and SIDE_BOARD_1) on the system board. 3. Slide the side I/O panel towards the clamps until it is firmly seated. (see Replacing the Shield). 9. Replace the computer cover (see Replacing the Computer Cover). Back to Contents Page
  • Dell Studio One 19 | Service Manual - Page 35
    Contents Page Speakers Dell Studio One 19/1909 Service Manual Removing the Right Speaker Replacing the Right Speaker Removing the Left Speaker Replacing the Left Speaker WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety
  • Dell Studio One 19 | Service Manual - Page 36
    the Shield). 8. Replace the computer cover (see Replacing the Computer Cover). 9. Connect your computer and all attached devices to electrical outlets, and turn them on. Removing the Left Speaker NOTE: To locate the left speaker, see Inside View of Your Studio One. 1. Follow the procedures in
  • Dell Studio One 19 | Service Manual - Page 37
    3. Reconnect the left speaker cable to the connector (SPEAKER_1) on the system board. 4. Replace the four screws that secure the speaker to the chassis. 5. Replace the shield (see Replacing the Shield). 6. Replace the computer cover (see Replacing the Computer Cover). Back to Contents Page
  • Dell Studio One 19 | Service Manual - Page 38
    Back to Contents Page Stand Dell Studio One 19/1909 Service Manual Removing the Stand Replacing the Stand WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance
  • Dell Studio One 19 | Service Manual - Page 39
  • Dell Studio One 19 | Service Manual - Page 40
    Back to Contents Page System Board Dell Studio One 19/1909 Service Manual Removing the System Board Replacing the System Board WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the
  • Dell Studio One 19 | Service Manual - Page 41
    to the computer. 12. Turn on the computer. NOTE: After you have replaced the system board, enter the computer Service Tag in the BIOS of the replacement system board. 13. Insert the CD that accompanied the replacement system board into the appropriate drive. Follow the instructions that appear
  • Dell Studio One 19 | Service Manual - Page 42
    Page System Fan and Heat Sink Assembly Dell Studio One 19/1909 Service Manual Removing the System Fan and Heat Sink Assembly Replacing the System Fan and Heat Sink Assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional
  • Dell Studio One 19 | Service Manual - Page 43
    the three screws securing the system fan to the system board. 5. Replace the back I/O panel (see Replacing the Back I/O Panel). 6. Replace the stand (see Replacing the Stand). 7. Replace the shield (see Replacing the Shield). 8. Replace the computer cover (see Replacing the Computer Cover). Back to
  • Dell Studio One 19 | Service Manual - Page 44
    to Contents Page System Setup Dell Studio One 19/1909 Service Manual Overview Clearing Forgotten Passwords Clearing CMOS Settings Flashing the BIOS Overview Use system setup to: l Change the system configuration information after you add, change, or remove any hardware in your computer l Set or
  • Dell Studio One 19 | Service Manual - Page 45
    you to boot through any other device. Power Management Features ACPI Suspend Type Specifies the suspend type. The default is S3. C1E Support This option allows you to enable or disable the "Enhanced Halt State". Remote Wake Up This option turns on the computer when a user tries to access the
  • Dell Studio One 19 | Service Manual - Page 46
    the USB device to a USB connector. 2. Turn on (or restart) your computer. 3. When F2 = Setup, F12 = Boot Menu appears in the upper-right corner of the screen, press . If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop. Then
  • Dell Studio One 19 | Service Manual - Page 47
    the Shield). 11. Replace the computer cover (see Replacing the Computer Cover). 12. Connect your computer and devices to electrical outlets, and turn them on. Clearing CMOS Settings WARNING: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your
  • Dell Studio One 19 | Service Manual - Page 48
    (see Replacing the Computer Cover). 14. Connect your computer and devices to electrical outlets, and turn them on. Flashing the BIOS Flashing the BIOS From the Hard Drive 1. Turn on the computer. 2. Locate the BIOS update file for your computer at the Dell Support website at support.dell.com. NOTE
  • Dell Studio One 19 | Service Manual - Page 49
    BIOS. When the flash update is complete, the computer will automatically reboot. 3. Press during POST to enter the system setup program. 4. Click Load Defaults and click OK in pop-up window to reset the computer defaults. 5. Remove the BIOS upgrade CD from the drive. 6. Press and click
  • Dell Studio One 19 | Service Manual - Page 50
    Back to Contents Page Technical Overview Dell Studio One 19/1909 Service Manual Inside View of Your Studio One System Board Components WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the
  • Dell Studio One 19 | Service Manual - Page 51
    ) 19 WLAN connector (WLAN) 20 side I/O panel connector (SIDE_BOARD1) 21 serial ATA drive connector (SATA_1) 22 hard drive power connector (HDD_POWER) 23 battery socket (BAT1) 24 front audio connector (F_AUDIO) 25 system fan connector (SYS_FAN1) 26 thermal resistor connector (TEM) 27 touch
  • Dell Studio One 19 | Service Manual - Page 52
    to Contents Page Dell Studio One 19/1909 Service Manual NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates
  • Dell Studio One 19 | Service Manual - Page 53
    Back to Contents Page Webcam Dell Studio One 19/1909 Service Manual Removing the Webcam Replacing the Webcam WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
Dell Studio One 19/1909 Service Manual
Notes, Cautions, and Warnings
Information in this document is subject to change without notice.
© 2009 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text:
Dell
and the
DELL
logo are trademarks of Dell Inc.;
Microsoft
,
Windows, Windows Vista,
and
Windows Vista
start button logo
are either trademarks or
registered trademarks of Microsoft Corporation in the United States and/or other countries.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
Model MTF
March 2009
Rev. A00
Technical Overview
Before You Begin
Computer Cover
Shield
Microphone
Stand
Memory Module(s)
Back I/O Panel
Processor Fan and Heat Sink
Processor
Speakers
Drives
Cards
Inverter
System Fan and Heat Sink Assembly
Side I/O Panel
Power Supply Unit
Battery
System Board
Support Assembly
Webcam
System Setup
NOTE:
A NOTE indicates important information that helps you make better use of your computer.
CAUTION:
A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
WARNING:
A WARNING indicates a potential for property damage, personal injury, or death.