Dell UP3214Q Dell - Statement of Volatility

Dell UP3214Q Manual

Get Dell UP3214Q PDF manuals and user guides View all Dell UP3214Q manuals
Add to My Manuals
Save this manual to your list of manuals

Dell UP3214Q manual content summary:

  • Dell UP3214Q | Dell - Statement of Volatility - Page 1
    to avoid the problem. The Dell UP3214Q UltraSharp Monitor contains both volatile No M24512 / I252 512k bit. To store DP EDID, HDCP and user adjust data. DDR3 SDRAM NT5CB64M 16FP-DH I225 stream and firmware code. EEPROM 24C02 I224 Non-volatile EEPROM 2Kbit. No To store HDMI EDID data.
  • Dell UP3214Q | Dell - Statement of Volatility - Page 2
    a registered trademark and AMD Opteron™, AMD Phenom™, and AMD Sempron™ are trademarks of Advanced Micro Devices, Inc. Microsoft®, Windows®, Windows Server®, MS-DOS® and Windows Vista® are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries
  • 1
  • 2
October 2013
Statement of Volatility – Dell UP3214Q UltraSharp
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
The Dell UP3214Q UltraSharp Monitor contains both volatile and non-volatile (NV) components. Volatile
components lose their data immediately after power is removed from the component. Non-volatile (NV)
components continue to retain their data even after power is removed from the component. The following
NV components are present on the Dell UP3214Q system board.
Table 1.
List of Non-Volatile Components on System Board
______________
© 2013 Dell Inc.
Trademarks used in this text: Dell™, the DELL logo, Dell Precision™, OptiPlex™, Latitude™, PowerEdge™, PowerVault™,
PowerConnect™, OpenManage™, EqualLogic™, KACE™, FlexAddress™ and Vostro™ are trademarks of Dell Inc. Intel®, Pentium®,
Description
Reference
Designator
Volatility Description
User
Accessible
for external
data
Remedial Action (Action
necessary to prevent loss of
data)
Serial Flash
ROM
W25Q16CV
I245 / I248
/ I251
Non-volatile Flash
memory, 16M bit. To
store firmware.
No
Part place on Interface
Board, it has
hardware/software write
protected.
EEPROM
M24512
I246 / I249
/ I252
Non-volatile memory,
512k bit. To store DP
EDID, HDCP and user
adjust data.
No
Part place on Interface
Board, it has
hard
ware/software write
protected.
DDR3
SDRAM
NT5CB64M
16FP-DH
I225 / I226
/ I227 /
I228 / I229
/ I230
Volatile memory 1Gbit
(64Mbx16). To store video
data stream and firmware
code.
No
Part place on Interface
Board.
EEPROM
24C02
I224
Non-volatile EEPROM 2Kbit.
To store HDMI EDID data.
No
Part place on Interface
Board, it has
hardware/soft
ware write
protected.
Serial Flash
ROM
PM25LD020
I233
Non-volatile Flash ROM
2Mbit. To store firmware.
No
Part place on Interface
Board, it has soft
ware write
protected.
EEPROM
24C02
I241
Non-volatile EEPROM 2Kbit.
To store monitor DC on /
off store.
No
Part place on Interface
Board, it has soft
ware write
protected.
Serial Flash
ROM
PM25LD010
I902
Non-volatile Flash ROM
1Mbit. To store firmware.
No
Part place on Card Reader
Board, it has software
write
protected.
CAUTION: All other components on the system board lose data if power is removed from the system. Primary power
loss (unplugging the power cord and removing the battery) destroys all user data on the memory (DDR3, 1067 MHz).
Secondary power loss (removing the on-board coin-cell battery) destroys system data on the system configuration
and time-of-day information.