Dell Unity 650F Unity™ Family Unisphere® Command
Dell Unity 650F Manual
View all Dell Unity 650F manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell Unity 650F manual content summary:
- Dell Unity 650F | Unity™ Family Unisphere® Command - Page 1
Dell Unity™ Family Unisphere® Command Line Interface User Guide Version 5.x Part Number: 302-002-578 April 2022 Rev. 10 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 2
and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2016 - 2022 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 3
Contents Additional resources...16 Chapter 1: Introduction...17 Overview...17 Storage types...17 Use Unisphere CLI in scripts...17 Set up the Unisphere CLI client...18 Install the Unisphere CLI client...18 Launch the Unisphere CLI client...18 Certificate verification...18 Unisphere CLI syntax...19 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 4
settings...37 Manually fail back Prepare system software version...42 View faulted storage resources...43 Upgrade the system...44 Create 61 Check Integrated ESRS network connection...62 Check support credential readiness for integrated ESRS 62 Test user roles...68 View user roles...69 4 Contents - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 5
user account settings...74 Configure user account settings...75 View user account settings...77 Manage support credentials...78 View support credentials...78 Configure or change support credentials...78 Delete support credentials...79 Manage system limits...79 View system limits...80 View installed - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 6
NAS server settings...114 Delete NAS servers...117 Check and update user mappings for multiprotocol NAS servers 118 Manage FTP settings...120 ...168 View reverse CHAP secret settings...169 Set up iSNS for iSCSI storage...169 Create iSNS server records...169 View iSNS server records...170 Delete - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 7
an FSN...198 View FSN settings...199 Change an FSN...200 Delete an FSN...201 Manage DNS settings...201 Configure DNS settings...202 View default DNS addresses...203 View DNS server domains...203 Configure a DNS domain...203 Manage NTP server settings...204 Create an NTP server record...205 View - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 8
LDAP settings...220 Utility commands...221 Ping...221 Trace route...221 Manage Distributed Hierarchical Storage Management 222 View DHSM settings...222 Change Distributed Hierarchical Storage Management settings 223 Manage DHSM Connection...224 Create a DHSM connection...224 View DHSM connection - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 9
virtual machines...282 VM hard disk...282 View all hard disks...283 Chapter 5: Manage Hardware Components 284 Manage Storage Processor (SP)...284 View Storage Processor...285 Manage disk...286 View disk...287 Rescan disk (virtual deployments only)...289 Change disk settings (virtual deployments - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 10
...318 Manage FAST VP pool settings...318 Manage pool tiers...323 View storage tiers...323 View pool resources...324 Manage FAST VP general settings...326 ...327 View FAST VP general settings...328 Manage FAST Cache (supported physical deployments only 329 Create FAST Cache...329 View FAST Cache - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 11
storage user quotas for file systems and quota trees 356 Create a user quota on a file system or quota tree 356 View user quotas...357 Change quota limits for a specific user...358 Refresh user consistency groups...399 Change consistency groups...400 Delete consistency groups...402 Refresh thin - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 12
snapshots...459 View snapshots...461 Attach snapshots to hosts...463 Refresh snapshots...464 Replicate snapshots...464 Detach snapshots...465 Restore storage resources to snapshots...466 Delete snapshots...467 Copy snapshots...468 Modify snapshots...469 Manage snapshot NFS shares...470 Create NFS - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 13
Pause replication sessions...493 Resume replication sessions...493 Manually synchronize replication sessions...495 Delete replication sessions...495 only 503 Change encryption setting for KMIP support (physical deployments only 504 Manage KMIP support (physical deployments only 504 View KMIP - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 14
...559 Chapter 10: Service the System 561 Change the service password...561 Service the system...562 Restart Service Information...565 View service information file list...565 Manage SSH access...566 Set SSH access...566 View SSH settings...567 Service the storage processor (SP)...567 Enter service - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 15
service...569 View metrics service settings...569 Configure metrics service SMB 590 Generate and review the user mapping report 591 Resource configuration use storage 597 Create an asynchronous replication session for file storage 597 Create a synchronous replication session for file storage - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 16
feature documentation or release notes, go to Unity Technical Documentation at: dell.com/unitydocs. Troubleshooting For information about products, software updates, licensing, and service, go to Support (registration required) at: dell.com/ support. After logging in, locate the appropriate product - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 17
and monitoring the system ● Managing users ● Provisioning storage ● Protecting data ● Controlling host access to storage Storage types The Unisphere CLI supports provisioning and management of network block and file-based storage, including: ● File system storage, which contains one or more shares - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 18
On Windows, double-click the installer executable and follow the prompts. The default installation location is: ○ 64-bit systems: C:\Program Files (x86)\Dell EMC\Unity\Unisphere CLI ○ 32-bit systems: C:\Program Files\Dell EMC\Unity\Unisphere CLI NOTE: The installation directory is added to the PATH - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 19
to low or medium after the RPM package has been installed: low medium (default) The certificate verification process will not be used to access identify the type of object on which to perform an action, such as a user, host, LDAP setting, or the system you are managing. All objects are categorized - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 20
on each of the action commands. Example In the following example for changing the password of a user account, the action is set: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /user/account -id local_user set -passwd NewPassword456! -oldpasswd password123 Action qualifiers Action qualifiers are - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 21
command to create a local user account. The new user account receives the ID local_user: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /user/account create -name local_user - type local -passwd Password789! -role operator Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 22
the set command. This guide often refers to those password for a user account. The path /user/account specifies that the object type is a user account. The -id object qualifier identifies local_user as the user as a table, with column headers and rows. By default, values that are too long to fit in a - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 23
ID = la_0 ID = la_0 ID = la_0 uemcli /net/nas/server show -filter "ID, SP, Health state, ID, Name" Filter format Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = nas_1 SP = SPA Health state = OK (5) ID = nas_1 Name = Mynas1 2: ID = nas_2 SP = SPA - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 24
The following command deletes user account local_user1: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /user/account -id local_user1 delete default|-certList|-certClear|-certDel|-certImport} [Get help on objects or actions] uemcli [-d ] [-port ] [-u ] [-p - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 25
destination address as the default for this client] uemcli -d -port [-silent] -default [List certificates saved for the object type followed by the -help switch to view a list of supported action commands. Example The following command displays the action commands to set (change - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 26
: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/if set -? Storage system address: 127.0.0.1 Storage system port: 443 HTTPS connection /net/if -id set [ -vlanId following: ● interactive - Client prompts the user to take action (default). ● reject - Client automatically rejects the - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 27
Switch Description ● accept - Client automatically accepts the certificates. ● store - Client automatically accepts and stores the certificates in the lockbox. View certificates View a list of all SSL certificates stored in the lockbox. NOTE: The show action command explains how to change the - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 28
in to the system. -securePassword Specifies the password in secure mode - the user will be prompted to input the password. -timeout|-t Timeout (in seconds) after which you are automatically logged out of the system due to user inactivity or a system problem. The default value is 600 seconds (10 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 29
is installed on user service parameters. ● -f|-file file type - For file, type the path and filename of the file to upload. For type, type the file type to upload. ● parameter = value - Optional parameter=value pairs for including specific parameters during the upload. NOTE: For a list of supported - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 30
the file to customer support. ○ config - Save details about the configuration settings on the storage system to a file. Service personnel can use this restore your system from this file. This action should be executed with service user credentials. NOTE: It is recommended that you save the file to - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 31
at a time. This means that if the Service password is different than the admin password, you cannot access the CLI with the service user account with-saveUser enabled. Remove the specified user account from the lockbox. Save the destination and port pair as the default system to access. When you run - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 32
supports one set of saved credentials for the system. This means that this switch should not be enabled if the admin and service passwords are different, as this will prevent successful log in of the service account into the CLI. Format [{-d|-destination} ] [{-u|-user the -default switch, - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 33
password 12345: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! Example 2 The following example saves the access credentials for the specified user: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! -saveUser Example 3 The following example sets the destination system as the default support - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 34
= EMC Storage System Product serial number = FNM00102000154 Auto failback = on Health state = Degraded/Warning (10) Save Unisphere CLI settings You can save the following settings on the host on which you run Unisphere CLI: ● User access credentials, including your username and password, for - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 35
user roles • Manage user accounts • Manage user account settings • Manage support credentials • Manage system limits • View installed feature licenses • View and accept the End User for SP. ● Manually fail back NAS servers there is a hardware or software problem with an SP. This failover causes - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 36
Average) (physical deployments only) Supported SP upgrades(physical deployments only) ● OK BUT (7) - Working correctly, but there could be a problem. ● Degraded/Warning (10) - Working and performing all functions, but 30-second sampling rate) List of storage processor names that current system can - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 37
a physical system: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /sys/general show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: System name = demo Model = Unity 300 UUID Base = 0 System UUID = Product serial number = demo Auto failback = on - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 38
: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /sys/general set -autoFailback off Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Manually fail back NAS servers Manually fail back all failed over NAS servers to their original SP. If - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 39
first name Contact last name First name of the user. Last name of the user. Contact mobile phone Contact company Mobile phone number of the user. Company of the user. Site ID Internal ID for identifying where the system is installed. Contact email address Contact email address for the system - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 40
command displays the general setting information for the system: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /sys/info show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: Contact first name = Zach Contact last name = Arnold Contact company = EMC Contact - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 41
manually by a user, or that have been automatically pushed down to the system by support. NOTE: Support will not push down any software images to the system without prior user /sys/soft/ver [{-id |-type {installed|candidate|downloaded}}] show Object qualifier Qualifier Description -id - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 42
= Pause allowed = Image filename = Unity-Drive-Firmware-V2-Dec-19-2016.tgz.bin.gpg Prepare system software version Prepare an automatically downloaded software image for installation. NOTE: Support will not push down any software images to your system without prior user consent. Format /sys/soft - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 43
1 The following command prepares automatically downloaded software image "ASD_1" for installation: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /sys/soft/ver -id ASD_1 prepare Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Example - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 44
The upgrade session installs an upgrade candidate file that was uploaded to the system. Download the latest upgrade candidate from the support website. Use the Type The type of upgrade being performed: software upgrade or storage processor upgrade. With software upgrade, details can be found with - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 45
this system are identified using /sys/general show. -offline Optional parameter that will start an offline storage processor upgrade rather than an online (default) storage processor upgrade. -pauseBetweenReboots Optional parameter for software or online Data-in-place (DIP) upgrades. If specified - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 46
following command displays details about the hardware upgrade session: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /sys/upgrade show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: Type = SP Status = Running Status message = Creation time = 2015-11-09 19 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 47
-p MyPassword456! /sys/upgrade show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: Type support options. [Error Code: platform::check_boot_control_status_2]","Error: One or more LUNs are in degraded state. Record the error code and contact your service - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 48
of the TLS protocol that the system supports for SSL communication. Valid values are: ● TLSv1.0 and above ● TLSv1.1 and above ● TLSv1.2 and above NOTE: Default value is TLSv1.0 and above. Indicates whether the storage processor has restricted shell enabled for the Service account. Valid values are - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 49
or to OE versions earlier than 4.3 are not supported. ● For Unisphere, if a browser is restricted to Unity. In this case, you must install Unisphere CLI client version 5.0.3 to connect with Unity. -restrictedShellEnabled Enables or disables restricted shell on the storage processor for the Service - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 50
TLS protocol versions for a NAS server. Use the svc_nas service script to configure the supported TLS protocol versions for a NAS server. For more information about this service script, refer to the Dell EMC Unity Family Service Commands Technical Notes. The following command changes the system - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 51
/sys/time show Example The following command displays the system time: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /sys/time show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: Time = 2011-01-01 03:00:00 Change system time Change the system time. Format /sys - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 52
Example The following command displays the schedule timezone: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /sys/schedtimezone show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: Name = (UTC-05:00) Eastern Time (US & Canada) Operation completed successfully - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 53
name "(UTC-05:00) Eastern Time (US & Canada)" Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Be aware of the following of the account on the proxy server. ● Password of the account. ● Whether the support contracts list is updated automatically on a weekly basis. Manage - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 54
address of the support services proxy server. Support proxy server port Port number of the support services proxy server Support proxy server user name Name of the account on the support proxy server. Support proxy server password Password of the account on the support proxy server. Automatic - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 55
-supportProxyPort Specify the port of the support services proxy server. -supportProxyUser Specify the user name of an account on the support services proxy server. -supportProxyPasswd Specify the password for the support services proxy server account. -supportProxyPasswdSecure Specifies the - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 56
uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /sys/support/contract show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = contract1 Status = active Service type = software Expiration date = 2012/12/31 Refresh support contracts Refresh or update the list - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 57
ESRS activities for the storage systems associated with the gateway. The ESRS Gateway is a remote support solution application that is installed on one or more Secondary Address Secondary Port Description Indicates whether the Centralized ESRS service is enabled. Valid values are: ● yes ● no - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 58
Example The following command displays the Centralized ESRS configuration: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /sys/support/esrsc show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: Enabled = yes Address = 10.10.10.123 Port = 9443 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 59
ESRS to the Dell EMC servers. If there is any failure, Centralized ESRS cannot be enabled. Format /sys/support/esrsc checkNetwork -address Local/joe -p MyPassword456! /sys/support/esrsc checkNetwork -address 10.100.10.7 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 60
service connectivity options for Integrated ESRS: ● Outbound/Inbound, which is the default, from the storage system to the Support Center and from the Support Center to the storage Integrated ESRS service is enabled. Valid values are: ● yes ● no Indicates whether the ESRS end user license agreement - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 61
Local/joe -p MyPassword456! /sys/support/esrsi show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection disabled, other parameters cannot be changed. -acceptEula Specifies whether to accept the end user license. Valid value is: ● yes NOTE: If ESRS EULA is not accepted - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 62
/Inbound) (default) Example The following command enables Integrated ESRS, accepts the EULA, and sets the type of Integrated ESRS: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /sys/support/esrsi set -enable yes -acceptEula yes -type oneWay Storage system address: 10.0.0.1 Storage system port - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 63
Dell EMC. Format /sys/support into Service 360 to view recent Service user. The access code will only be valid for 30 minutes. This process adds an extra level of authentication and helps to ensure that you are the correct user and authorized to enable ESRS on the storage system. Format /sys/support - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 64
Local/joe -p MyPassword456! /sys/support/esrsi validateAccessCode -accessCode 76507252 Storage system address: 10.0.0.1 Storage system port: 443 HTPS connection Operation completed successfully. Manage Policy Manager The Policy Manager is optional and is installed on a customer supplied server or - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 65
default high (default) ● medium password Password of the account on the policy proxy server Proxy protocol Protocol used for communications with the policy proxy server. Valid values are: ● http ● socks (default support/esrsi/policymgr show -detail Storage system address: 10.0.0.1 Storage - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 66
the password of the account on the policy manager proxy server. -proxyProtocol Specifies the protocol to be used by the policy manager proxy server. Example uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /sys/support/esrsi/policymgr set -enable no Storage system address: 10.0.0.1 Storage system - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 67
event and error histories that can be used by support for diagnosing and troubleshooting issues. Table 16. Connect Home attributes Attribute Enabled -d 10.0.0.1 -u admin -p Password /sys/support/connecthome show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 68
Home emails will be sent to support. If not specified, a default value formatted as @emc Password /sys/support/connecthome test Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Manage user roles View the supported roles of users - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 69
Can view system data, edit system settings, and perform all major administrator tasks. ● storageadmin- Storage administrator role: Can view system data and edit settings. Cannot add user accounts or host configurations, perform initial system configuration, modify network settings, create or delete - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 70
vCenter to the storage system. Manage user accounts Control user access to the system and functionality by creating user accounts for each manager . The accounts combine a unique username and password with a specific role for each identity. When users connect to the system through the CLI or - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 71
3 passwords. -passwdSecure Specifies the password in secure mode - the user will be prompted to input the password and the password confirmation. -role Type the name of the role for the account. Value is one of the following: ● administrator - Administrator ● storageadmin - Storage Administrator - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 72
qualifier Qualifier -id Description Type the ID of the user account to change. Action qualifiers Qualifier -passwd -passwdSecure Description Type a new password for a local user. The following are the password requirements for user accounts: ● Passwords must be 8 to 40 characters in length and - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 73
. Example The following command changes the password for user account user_user1: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /user/account -id user_user1 set -passwd NewPassword456! -oldpasswd OldPassword456! Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 74
size Number of previous passwords Password period Maximum failed logins Description Indicates whether or not the user account settings feature is enabled. Values are: ● yes ● no NOTE: When this value is yes, but the detailed account settings are not specified, the "Default enabled value" for each - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 75
lockout period The time period (in seconds) for which an account will be locked before the user can attempt to login again. Value range is 1-86400 seconds. Default values are: ● Default enabled value: 3600 ● Disabled value: account never locks (empty). NOTE: Account lockout period, Maximum failed - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 76
the minimum number of characters for a password. Value range is 8-40. If not specified, user account setting default enabled value is 15. Specifies the number of passwords that cannot be reused. Valid range: 3 -12. If not specified, user account setting default enabled value is 5. Specifies the time - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 77
1 The following command enables the user account settings with all default enabled values set when transitioning from a disabled state: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /user/account/settings set -enabled yes Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 78
= 3600 Session idle timeout = 600 Default admin lockout enabled = no Manage support credentials Manage support credentials settings on the system, including: ● User name of the user account. ● Password of the user account. The following table lists the support credentials attributes: Table 20 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 79
be prompted to input the password. Example The following command specifies the new password of the support account: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /sys/support/account set -user user1 -passwd Password123 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 80
the given limit. Some system limits depend on the type of license installed. View system limits This command allows you to view system limits, 2: ID = Limit_Pool_MaxCount Name = Max Storage Pool Count Description = The maximum allowed number of storage pools on the system. Limit value = - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 81
you can use a particular feature or perform tasks, such as creating storage. To install a license, use the -upload switch to upload it to the of the license. Description of the license. Indication of whether a feature is installed with the license. Value is yes or no. Version of the license. Date - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 82
This license enables you to use the iSCSI protocol for block storage. Installed = yes Version = 1.1 Issued = 2009-11-09 Expires = Installed = yes Version = 1.1 Issued = 2009-01-19 Expires = Never Health state = OK (5) View and accept the End User License Agreement View the end user - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 83
following command accepts the EULA: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /sys/eula set -agree yes Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Manage Unisphere Central Management/Monitoring Unisphere Central management - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 84
-certificate 2fd4e1c67a2d28fced849ee1bb76e7391b93eb12 -passphrase password Storage system address: 10.0.0.1 Storage system port: 443 address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = ur_0 Address = 10.10.0.2 Change remote manager configuration Update a user account with new - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 85
system. Valid values are yes or no. The default value is set to no, which indicates that the authentication ur set -addr 10.10.0.2 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection files record messages to flat log files. The user-level system messages are recorded in English. However, - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 86
Severity Description Facility that will process the log. Value is one of the following (case-insensitive): ● KERN - Kernel messages. ● USER (default) - User-level messages. ● Syslog - Message generated internally by syslogd. Least severities that will be sent to the remote host. Valid values are - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 87
notice ● info ● debug NOTE: For example, debug is the default severity. When it is typed, all user/audit logs are sent to the remote host. When emergency is -protocol TCP -facility syslog -severity notice Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 88
/sys/rlog show Storage system address: 10.0.0.1 Storage system port: 443 port ] [-protocol {udp|tcp}] [-facility {KERN | USER | Syslog}] [-severity {emergency | alert | critical | error Type the port number on the remote host. Default is 514. -protocol Type the protocol for transferring - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 89
● notice ● info ● debug NOTE: For example, debug is the default severity. When it is typed, all user/audit logs are sent to the remote host. When emergency is typed, 514 -protocol UDP -facility KERN -severity critical Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 90
Interface to manage certificates for different components on the storage system. The following table lists the attributes for ● CA ● Server ● Client ● TrustedPeer Service Service with which the certificate is associated. The services supported are: ● Mgmt_LDAP ● Mgmt_KMIP ● VASA_HTTP Scope - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 91
10.0.0.1 -u Local/joe -p MyPassword456! /sys/cert -id vasa_http-vc1-cacert-1 show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: - R3 - R3 ID Type Service Scope Trust anchor Version Serial number Signature algorithm Issuer name = vasa_http-vc1-cacert-1 = CA - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 92
the time and frequency when snapshots of the storage resource are taken. When you create a task Manage snapshots explains how to create snapshots manually and manage existing snapshots. Each protection ● system- Defined by the system ● user- Defined by a user Rules List of IDs for each task rule - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 93
user- and system-defined) on the system: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /sys/task/sched show Storage system address: 10.0.0.1 Storage Name = Default Protection Type = System Rules = RULE_3 Sync replicated = no 3: ID = MySchedID Name = MySched1 Type = User Rules = - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 94
it to an existing protection schedule or the system automatically assigns it to a new schedule. You then assign the schedule to the storage resource of which to schedule snapshots. Manage snapshot protection schedules explains how to view and delete protection schedules. The following table lists - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 95
is a read-only checkpoint ● share - The snapshot is set to read/write for users to create CIFS (SMB) shares of NFS exports. Create task rules Create a task rule and, optionally, on a specific minute within the specified hour. Supports up to two specified hours. ● daysinterval - Task executes on an - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 96
MM represents the minutes within the specified hour. Value range is 0:00 - 23:59. Default value is 0:00. If the value of -type is weekdayslist or monthdayslist, type the type hoursinterval -every 12 -at 30 -keepFor 10h Storage system address: 10.0.0.1 Storage system port: 443 96 Manage the System - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 97
uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /sys/task/rule create -schedId MySchedID -type hourslist -hours "8,20" -at 30 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = RULE_2 Operation completed successfully. Example 3 The following command creates a task rule - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 98
to change the output format. gmtoff switch cannot be used if user already configured schedule time zone. Because the attribute "Frequency" will -p MyPassword456! /sys/task/rule -sched SCHD_3 show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID Type Frequency - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 99
Detroit, Iqaluit, Marengo, New York, Vincennes: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /sys/task/rule -sched SCHD_3 show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = RULE_1 Type = HoursInterval Frequency = Every 12h at 30m after the hour ((UTC - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 100
SCHD_3, and try to use gmtoff switch: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! -gmtoff -4 /sys/task/rule -sched SCHD_3 show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation failed. Error code: 0x6401f5e "-gmtoff" is not allowed when schedule time zone is - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 101
the minutes within the specified hour. Value range is 0:00 - 23:59. Default value is 0:00. If the value of -type is weekdayslist or monthdayslist, type type hoursinterval -every 12 -at 30 -keepFor 10h Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = RULE_1 Schedule - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 102
-set -frequency -hours "8,20" -at 30 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation failed. Error You cannot delete a rule that is associated with a system-defined schedule, only a user-defined schedule. Also, when you delete the last rule in a schedule, the - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 103
● Completed with problems ● Failed ● Rolling back Describes the result of the step. Current step. User who started the job. Time when the job was started. Elapsed time for the current job. Time remaining to complete the current job. Job progress in percent. Object or storage - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 104
MyPassword456! /sys/task/job show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = N-11 Type = Storage resource provisioning Title = Create storage resource State = Completed Result description = Success User = Local/admin Step = Start time - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 105
MyPassword456! /sys/task/job -id N-23654 cancel Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. . Identifies jobs that have completed successfully or completed with problems. Example The following command deletes an existing job. uemcli - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 106
of the operation. The error code of the rollback. The error message of the rollback. Additional information. Format: key: "value", key: "value",... Object or storage resource affected by the job. Only one object is associated with each job step. Format is shown as: () View list of - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 107
description = Details = ID: "fs_3"; Name: "testFS3" Associated object = fs_3 (/stor/prov/fs) 3: Title = Add filesystem to storage resource Status = Completed Execution result code = 0 Execution result description = Rollback result code = 0 Rollback result description = Details = ID - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 108
transferred through the SMB or NFS protocols. You must configure at least one NAS server before you can create network share storage. You can configure a NAS server to support Windows network shares (SMB), Linux/UNIX network shares, or both. NAS servers run on each SP and communicate with network - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 109
parentheses. For example, SPA (failed over to SPB). Storage pool Tenant Interface Associated storage pool identifier. Identifier and name of the tenant. ID service Indicates whether SMB file systems are enabled on the NAS server. Value is yes or no. Default is no. SMB file systems provide support - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 110
does not need to be defined in the UDS. Default Windows username Default Windows user name that grants file access in the multiprotocol sharing mode. This user name is used for Unix users when the corresponding Windows user name is not found by the mapping mechanism. Replication type Indicates - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 111
reduction for this NAS server. Data Reduction percent Specifies the storage percentage saved when using data reduction, compared to the total a NAS server Create a NAS server. NOTE: The NFSv3 protocol is enabled by default when creating a NAS server. Format /net/nas/server create -name - - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 112
storage pool for the NAS server. Specifies the name of the storage Service used for querying identity information for Unix (such as UIDs, GIDs, net groups). Valid values are: ● nis ● ldap ● local ● none (default) ● localThenNis ● localThenLdap -autoUserMappingEnabled Indicates whether a Windows user - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 113
system port: 443 HTTPS connection 1: ID Name NetBIOS name SP Storage pool Tenant Interface NFS enabled NFSv4 enabled CIFS enabled Multiprotocol sharing enabled Unix directory service Health state 2: ID Name NetBIOS name = nas_1 = MyFS1 = MyFS1 = spa = pool_0 = tenant_1 = if_0 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 114
= spa Storage pool = pool_1 Tenant = Interface = NFS enabled = yes NFSv4 enabled = no CIFS enabled = no Workgroup = Windows domain = Multiprotocol sharing enabled = no Unix directory service = none Auto user mapping enabled = Default Unix username = Default Windows username - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 115
file system is created on that NAS server. Directory Service used for querying identity information for Unix (such user and allows access to the NAS server's files through Windows. ● no (default). The Windows authentication fails unless there is a default Unix username configured. Default Unix user - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 116
● Enables multiprotocol sharing. ● Uses LDAP as the Unix Directory Service. uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/nas/server -id nas_1 set -mpSharingEnabled yes -unixDirectoryService ldap Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = nas_1 Operation - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 117
after the SP modification is completed. Are you sure you want to modify the default SP? yes / no:yes ID = nas_1 Operation completed successfully. NOTE: and the health details attribute is updated to Transitioning to other Storage Processor. When the SP modification completes, the NAS server health - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 118
. This prompts the user to input the password. -skipUnjoin Does not unjoin the SMB server from the AD domain before deleting it. Example The following command deletes NAS server nas_1: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/nas/server -id nas_1 delete Storage system address: 10 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 119
and generate a user mapping report. A new UID/GID will be obtained from a Unix Directory Service for the user name of the object owner. The user name will be snapshot is updated every 15 minutes by default. Example 1 The following command generates a user mapping report for NAS server nas_1. - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 120
update -confView Storage system address: 10.0.0.1 Storage system port: 443 Windows user name. You can also have the FTP service to accept anonymous user default) ● no Anonymous user enabled Indicates whether the FTP server supports anonymous user authentication. Valid values are: ● yes (default - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 121
numerical group IDs are invalid and ignored). NOTE: If this option is specified, FTP/SFTP connections are allowed only for the listed groups. Any user groups not specified in this list will be denied access. If defined, denied groups cannot be defined. Denied hosts Specifies a comma-separated list - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 122
/net/nas/ftp show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: NAS server = nas_1 FTP enabled = yes SFTP enabled = no CIFS users enabled = yes Unix users enabled = yes Anonymous user enabled = no Homedir limitation enabled = no Default home directory - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 123
Indicates whether the FTP server supports anonymous user authentication. Valid values are: ● yes ● no -homedirLimitEnabled Indicates whether authenticated FTP or SFTP users are limited to their home directories. Valid values are: ● yes ● no -defaultHomedir Type the default home directory for the - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 124
host IPs to remove from the existing list of denied host IP addresses. Type the comma-separated list of user names that will be allowed access to the FTP/SFTP server (numerical user IDs are invalid and ignored). NOTE: If this option is specified, FTP/SFTP connections are allowed only for the - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 125
option is specified, FTP/SFTP connections are allowed only for the listed groups. Any user groups not specified in this list will be denied access. If -allowGroup is welcome "Welcome to this awesome server" Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 126
a NAS server to use LDAP or NIS as a Unix Directory Service to map users, retrieve netgroups, and build a Unix credential. When an initial LDAP The TCP/IP port used by the NAS server to connect to the LDAP servers. Default value for LDAP is 389 and LDAPS is 636. Type of LDAP protocol. Valid values - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 127
binding. Bind password (applies to Simple authentication) Specifies the associated password used when binding ● Overridden - LDAP list has been manually modified or overridden on the replication destination. server nas_1 show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 128
= Realm = Bind DN = cn=administrator,cn=User,dc=emc,dc=com Base DN = dc=emc, value> [-realm ] [{-password | -passwordSecure want the NAS server to use DNS service discovery to obtain LDAP server IP addresses is used, the default is 363. If LDAP is used, the default port is 389. - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 129
example.domain.com -port 636 -protocol ldaps -authType simple -bindDn "cn=administrator,cn=User,dc=emc,dc=com" -bindPasswd "Ldap123!" -baseDn "dc=mec,dc=com" Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Upload an LDAP schema You can - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 130
Example uemcli -upload -f "LDAP_nas_1.conf" -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/nas/ ldap -server nas_1 -type config Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Download an LDAP schema When an initial LDAP configuration is - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 131
belong to a tenant. NOTE: If no VLAN ID is specified, which is the default, packets do not have VLAN tags. The Unisphere online help provides more details about the destination. ● Overridden - indicates that such interface is manually modified / overridden on the destination side. When a replication - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 132
Table 33. Interface attributes (continued) Attribute Description interface is deleted on the source, overridden interfaces stop responding and health state values of such interfaces become degraded/warning. This is because the SMB/ CIFS shares are tightly set to the production IP interfaces, and - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 133
differ from the specified port (for example, if the user specifies spa_eth2, but the NAS server current SP is If no VLAN ID is specified, which is the default, packets do not have VLAN tags. The Unisphere -netmask 255.255.255.0 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 134
The following command displays all NAS interfaces on the system: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/nas/if show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID NAS server Preferred Port VLAN ID IP address Subnet mask Gateway SP Health - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 135
range is 1-4095. NOTE: If no VLAN ID is specified, which is the default, packets do not have VLAN tags. The Unisphere online help provides more details on is optional for both IPv4 and IPv6. This qualifier configures the default gateway for the specified port's SP. -preferred Specify this qualifier - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 136
IF_1: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456!/net/nas/if -id IF_1 set -gateway 2001:db8:0:170:a:0:2:70 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = IF_1 Operation completed successfully. Delete NAS interfaces Delete a NAS interface. CAUTION: Deleting - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 137
on the value of -type. Value is one of the following: ● For a default route, the system will use the IP address specified for -gateway. ● For a host this attribute is empty. Health state Health details Use for external services access Numerical value indicating the health of the system. Valid - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 138
to inbound service requests. Specify the type of route. Valid values are (case-insensitive): ● default - System uses the default route/gateway ‑netmask 255.255.255.0 -gateway 10.64.74.1 Storage system address: 10.64.75.201 Storage system port: 443 HTTPS connection ID = route_1 Operation completed - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 139
on the value of -type. Valid values are: ● For a default route, do not specify a value. The system will use the IP gateway 10.64.74.2 uemcli Storage system address: 10.64.75.201 Storage system port: 443 HTTPS connection routes that are used for external services. -if Indicate whether you want - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 140
Local/joe -p MyPassword456! /net/nas/route show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = route_1 NAS server sync = Use for external services access = no 2: ID = route_2 NAS server = nas_1 Type = default Target = Netmask = Gateway - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 141
Storage system address: 10.0.0.1 Storage system users and services. You can configure a secure NFS environment for a multiprotocol NAS server or one that supports Unix-only shares. In this environment, user servers. Port KDC servers TCP port. Default: 88. Configure Kerberos settings Set Kerberos - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 142
Description NOTE: Setting addresses via IP and overriding them is not supported in this release. A fully qualified DNS name is expected. .mydomain.emc.com" -realm "MYDOMAIN.LAB.EMC.COM" Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. View - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 143
be displayed. Valid values are 1 to 4095. If omitted, the default value is 1. -count Specifies the number of items to be displayed. Valid values are 1 to 4095. If omitted, the default value is 10. -inUse Valid values are: ● yes - Shows only those VLANs - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 144
multi-tenancy provides the ability to assign multiple network namespaces to the NAS Servers on a storage processor. Tenants are used to create isolated file-based (CIFS/NFS) storage partitions. This enables cost-effective tenant management of available resources while ensuring that tenant visibility - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 145
. uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/tenant create -name "Tenant A" -uuid b67cedd7-2369-40c5-afc9-9e8753b88dee Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = tenant_1 Operation completed successfully. View tenants View details about configured - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 146
changes the tenant settings for the list of VLAN IDs: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/tenant -id tenant_1 set -vlan 101,102,104 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. 146 Configure Network Communication - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 147
Local/joe -p MyPassword456! /net/tenant -id tenant_1 delete Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = tenant_1 Operation Windows server domain name. User name Password Windows domain user name. Windows domain user password. Last used organization unit - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 148
server NetBIOS name. By default it is generated automatically user password. -passwdSecure (valid only when joining the CIFS server to AD) Specifies the password in secure mode. The user will be prompted to input the password and the password Storage system address: 10.0.0.1 Storage system - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 149
Local/joe -p MyPassword456! /net/nas/cifs show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = was previously joined in order to perform the unjoin. You must also specify the user name and password of the new domain to which it will be joined. Format /net/nas/ - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 150
in secure mode - the user will be prompted to input the password and the password confirmation. Example uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/nas/cifs -id CIFS_0 set -workgroup MyWorkgroup -adminPasswd MyPassword Storage system address: 10.0.0.1 Storage system port: 443 HTTPS - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 151
mode. This prompts the user to input the password. -skipUnjoin Does not unjoin the CIFS server from the AD domain before deleting it. Example uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/nas/cifs -id CIFS_0 delete Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 152
If you configure secure NFS using this method, SMB support cannot be deleted from the NAS server while secure information. Comma-separated list of service principal names to used to authenticate 16 Unix groups. Value is yes or no (default). Credentials cache refreshing timeout, in minutes. Create an - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 153
the service principal in the AD domain. -passwd (Applies when the -kdcType is Windows.) Specifies the AD domain administrator password. -passwdSecure Specifies the password in secure mode. The user will be prompted to input the password and the password confirmation. -extendedUnixCredEnabled - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 154
formats are supported. Example uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/nas/nfs show -detail Storage system address: 10.0.0.1 Storage system port so that the client can specify this name when mounting exports. By default, the hostname is the same as the SMB computer name or NAS - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 155
to Configure Kerberos settings for more information. -username (Applies when the -kdcType is Windows.) Specifies a user name with administrative rights to register the service principal in the AD domain. -password (Applies when the -kdcType is Windows.) Specifies the AD domain administrator - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 156
. The user will be prompted to input the password and the password confirmation. Deletes the NFS server without automatically unregistering the NFS service principals from the AD domain. Example uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/nas/nfs -id nfs_1 delete Storage system address - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 157
. Example The following command displays the CAVA settings: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/nas/cava show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: NAS server = nas_0 Enabled = yes 2: NAS server = nas_1 Enabled = no Change CAVA - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 158
to receive event notification and context from the storage system when accessing file systems by using the default) ● no Username When using the MS-RPC protocol, name of a Windows user allowed to connect to CEPA servers. Password When using the MS-RPC protocol, password of the Windows user - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 159
ms to determine whether a CEPA server is offline. The default is 1,000 ms. The range is from 50 ms . ● Minor failure (15) - the Events Publishing service is not functional. ● Major failure (20) - -server nas_1 show -detail Storage system address: 10.1.2.100 Storage system port: 443 HTTPS connection - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 160
-passwdSecure -heartbeat -timeout Password of the Windows user defined by the username. Specifies the password in secure mode. The user is prompted to specify the password. Time interval between scanning CEPA servers (in seconds) to detect their online or offline status. The default is 10 seconds - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 161
nas_1 set -enabled yes -postEventPolicy accumulate Storage system address: 10.1.2.100 Storage system port: 443 HTTPS connection Operation ● Overridden - indicates that the Events Publishing pool servers list is manually modified or overridden on the destination side. When an Events Publishing - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 162
Table 43. Event descriptions Value Definition Protocol OpenFileNoAccess Sends a notification when a file is opened for a change other than read or write access (for example, read or write attributes on the file). ● SMB/CIFS ● NFS (v4) OpenFileRead Sends a notification when a file is opened - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 163
to be notified. uemcli /net/nas/event/pool create -server nas_1 -name mypool1 -addr 10.1.2.100 -postEvents CreateFile,DeleteFile Storage system address: 10.1.2.100 Storage system port: 443 HTTPS connection ID = cepa_pool_1 Operation completed successfully. View CEPA pool settings View details about - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 164
/event/pool -server nas_1 show Storage system address: 10.1.2.100 Storage system port: 443 HTTPS connection the Events Publishing pool servers list is manually changed or overridden on the destination servers list on a source Events Publishing service have no effect on an overridden Events - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 165
/pool -id cepa_pool_1 set -name TestCepaPool Storage system address: 10.1.2.100 Storage system port: 443 HTTPS connection ID = cepa_pool_1 Operation completed successfully. Delete a CEPA pool Deletes a CEPA pool. Before you begin The Events Publishing service requires at least one CEPA pool. If - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 166
NOTE: Only one VMware protocol endpoint server per NAS server is supported. Create protocol endpoint servers Create VMware protocol endpoints servers for File /nas/vmwarepe create -server nas_1 -if if_ 1 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = PES_0 Operation - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 167
the VMware protocol endpoint servers on the system. uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456!/net/nas/vmwarepe show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = PES_0 NAS server = nas_1 NAS server interface = if_1 Delete protocol endpoint - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 168
password specified for iSCSI nodes. The iSCSI reverse CHAP object manages the username/secret used by the target (storage system to 32 characters). -secretSecure Specifies the password in secure mode - the user will be prompted to input the password. -secretFormat The reverse CHAP input format. - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 169
system port: 443 HTTPS connection 1: Username = ReverseChapUser Set up iSNS for iSCSI storage The iSNS protocol (iSNSP) allows centralized management of iSCSI devices. An iSNS server can provide services such as remote discovery and configuration for iSCSI nodes and hosts. When iSNSP is in - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 170
receives the ID iSNS_10.5.2.128: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/iscsi/isns create -server 10.5.2.128 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = isns_0 Operation completed successfully. View iSNS server records View details for configured - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 171
iSNS server record: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/iscsi/isns -id isns_0 set -server 10.5.2.130 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = isns_0 Operation completed successfully. Manage iSCSI configuration The following table lists the - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 172
command shows details for the iSCSI configuration: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/iscsi/config show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: CHAP required = yes Change iSCSI configuration Modify the iSCSI configuration. Format /net - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 173
through the iSCSI protocol. iSCSI nodes run on each Ethernet port and communicate with network hosts through the SP ports. iSCSI nodes handle storage creation, monitoring, and management tasks for iSCSI LUNs. Hosts connect to the LUN through iSCSI initiators. Each iSCSI node is identified by an - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 174
Local/joe -p MyPassword456! /net/iscsi/node show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = ISCSIN_1 the iSCSI node to change. Action qualifier Qualifier -alias Description User-friendly name that identifies the iSCSI node. Example The following - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 175
for iSCSI storage. Manage network interfaces explains how to configure network interfaces on the system. MTU size Maximum transmission unit (MTU) packet size (in bytes) that the port can transmit. Default is 1500 bytes per packet. Requested MTU size MTU size set by the user. Available MTU - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 176
supported speeds List of supported speed values of the inserted Small Form-factor Pluggable. SFP supported protocols List of supported -u Local/joe -p MyPassword456! /net/port/eth show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = spa_eth2 Name = - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 177
for MTU size value. The MTU size values of 1500 bytes (default) and 9000 bytes (jumbo frame) are supported by all interfaces and I/O modules. -speed Type the port /port/eth -id spa_eth0 set -mtuSize 9000 Storage system address: 10.0.0.1 Storage system port: 443 Configure Network Communication 177 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 178
HTTPS connection ID = spa_eth0 ID = spb_eth0 Operation completed successfully. Manage SAS ports (physical deployments only) View the settings for the SAS ports on each SP. The following table describes the port attributes. Table 50. SAS port attributes Attribute Description ID ID of the port. - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 179
port/sas show Storage system address: 10.0.0.1 Storage system port: 443 Requested speed Link speed set by the user. Available speed List of available speed supported speeds List of supported speed values of the inserted Small Form-factor Pluggable. SFP supported protocols List of supported - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 180
Local/joe -p MyPassword456! /net/port/fc show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = spa_fc4 Name = supported speeds = 4 Gbps, 8 Gbps, 16 Gbps SFP supported protocols = FibreChannel Replication capability = Sync replication SFP supported - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 181
port fc1 on SP A to 1 Gbps: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/port/fc -id spa_fc1 set -speed 1Gbps Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = spa_fc1 Operation completed successfully. Manage uncommitted ports This command is used to manage - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 182
Local/joe -p MyPassword456! /net/port/unc show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = spb_unc5 Name use, no action is required." Connector type = LC SFP supported speeds = SFP supported protocols = 2: ID = spa_unc5 Name = SP A - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 183
supported speeds = SFP supported (IPv6 only). ● static- Indicates the IP attributes are set manually. IP address Subnet mask IPv4 or IPv6 address. IPv4 subnet mask the system: uemcli /net/if/mgmt show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: IP protocol - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 184
● static - Indicates the IP attributes are set manually. Specifies the IPv4 or IPv6 address of the following format: /. NOTE: The default prefix length for IPv6 is 64. -netmask Specifies -gateway 192.168.1.2 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 185
. Value is one of the following: ● iscsi - Interface for iSCSI storage. ● replication - Interface for replication-related data or management traffic. ID is 1-4095. NOTE: If no VLAN ID is specified, which is the default, packets do not have VLAN tags. The Unisphere online help provides more details - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 186
following: ● iscsi - Interface for iSCSI storage. ● replication - Interface for replication- differ from the specified port. For example, if the user specifies port spa_eth2, but the NAS server is on If no VLAN ID is specified, which is the default, packets do not have VLAN tags. The Unisphere online - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 187
command displays the details of all interfaces on the system. uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/if show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = if_0 Type = file NAS server = nas_0 Port = eth0_spa VLAN ID = VLAN MTU - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 188
range is 1-4095. NOTE: If no VLAN ID is specified, which is the default, packets do not have VLAN tags. The Unisphere online help provides more details on -gateway 2001:db8:0:170:a:0:2:70 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 188 Configure Network - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 189
MyPassword456! /net/if -id IF_1 delete Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed or host. A static IP route is a host, network, or default route that is configured manually. The system selects a route in order from most specific to least - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 190
network node based on the specified route type. Valid values are: ● For default, there is no value, as the system will use the specified gateway IP based on the value of -type. Value is one of the following: ● For default, the system will use the IP address specified for -gateway. ● For host, - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 191
system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = RT_1 Type = net Target = 10.64.74.10 Netmask = 255.255.255.0 Gateway = 10.0.0.1 Interface = IF_1 Health state = OK (5) 2: ID = RT_2 Type = default Target = Netmask = Gateway = 10.64.74.2 Interface - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 192
= IF_3 Health state = OK (5) Change IP routes Modify an existing IP route. Format /net/route set route -id set [-type {default | host | net}] [-target [netmask ]] [-gateway ] Object qualifier Qualifier -id Description Identifies the route object. Action qualifier - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 193
Local/joe -p MyPassword456! /net/route -id RT_1 set -target 10.64.200.11 ‑netmask 255.255.255.0 -gateway 10.64.74.2 Storage system address: 10.64.75.201 Storage system port: 443 HTTPS connection ID = RT_1 Operation completed successfully. Delete IP routes Delete an IP route. Format /net/route -id - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 194
the SP on which the ports are linked. Valid values are: ● SPA ● SPB Maximum transmission unit (MTU) packet size (in bytes) for the linked ports. Default is 1500 bytes per packet. Linux network device name. ID of the FSN port to which the link aggregation belongs, if it is part of - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 195
value. The MTU size values of 1500 bytes (default) and 9000 bytes (jumbo frame) are supported by all interfaces and I/O modules. Example The Local/joe -p MyPassword456! /net/la show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = spa_la_0_2 SP - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 196
size value. The MTU size values of 1500 bytes (default) and 9000 bytes (jumbo frame) are supported by all interfaces and I/O modules. Example The following MyPassword456! /net/la -id la0_SPA set -mtuSize 9000 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = la0_SPA ID - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 197
Local/joe -p MyPassword456! /net/la -id la0_SPA delete Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = la0_SPA ID replicating from one Unity system to another, configure the FSN the same way on both systems as a best practice. You will need to manually configure the - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 198
1280 and 9216. Specific I/O modules may restrict allowed range for MTU size value. The MTU size values of 1500 bytes (default) and 9000 bytes (jumbo frame) are supported by all interfaces and I/O modules. Example The following example creates an FSN where the primary port is a single ethernet port - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 199
the details of all the FSNs on the system. uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/fsn show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = spa_fsn_0_1 SP = spa Primary port = spa_iom_0_eth1 Secondary ports = spa_la_2 Active port - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 200
size value. The MTU size values of 1500 bytes (default) and 9000 bytes (jumbo frame) are supported by all interfaces and I/O modules. Example 1 The following net/fsn -d spa_fsn_0 set -secondaryPorts spa_iom_0_eth2 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 201
Storage system port: 443 HTTPS connection ID = spa_fsn_0 ID = spb_fsn_0 Operation completed successfully. Manage DNS settings A domain name server (DNS) is a network service responsible for converting domain names to their corresponding IP addresses. The system uses DNS services By default, the user - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 202
. ● Overridden - DNS list has been manually modified or overridden on the replication destination. DNS settings Configure the DNS settings for the storage system. Format /net/dns/config set {- a list of DNS server addresses to designate as default addresses. Separate the addresses with a comma. The - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 203
DNS server addresses designated as a default. Format /net/dns/config show Example The following command displays the DNS server addresses: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/dns/config show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1. Auto - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 204
dns -server nas_1 set -name "newdomain.one.com" Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Manage controller can operate as a time server if the Windows Time Service is running on it. Some applications will not operate correctly if - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 205
an IP address of each NTP server the system will use. NOTE: By default, the first NTP server address you specify will become the primary. Format /net ntp/server create -server 0.northamerica.pool.ntp.org Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = NTP_0.north - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 206
NTP server record, which contains two NTP server addresses: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/ntp/server show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = NTP_0.north-america.pool.ntp.org Server = 0.north-america.pool.ntp.org 2: ID - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 207
Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Manage NIS server domains The Network Information Service (NIS) consists of a directory service protocol for maintaining and distributing system configuration information, such as user - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 208
command displays details about the NIS server domain: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/nas/nis show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: NAS server = nas_0 Domain = nis.one.com Servers = nisserver1.one.com,10.64.74 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 209
Storage system port: 443 HTTPS connection Operation completed successfully. Manage SMTP server settings The system uses the Simple Mail Transport Protocol (SMTP) to e-mail alerts, based on alert severity, of system events to specified e-mail addresses and to EMC support User name User name - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 210
-d 10.0.0.1 -u Local/joe -p MyPassword456! /net/smtp show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = default Address = 192.168.0.15 Port = 25 Encryption level = SSL Authentication type = Plain User name = test Bypass proxy = no Configure SMTP - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 211
will use: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/smtp -id default set -addr 10.64.74.16 -port 25 -encryptLevel ssl -authType plain -user test -passwd test Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Manage NDMP server - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 212
system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: NAS server = nas_0 Enabled = yes 2: NAS server = nas_1 Enabled = no Configure NDMP server settings Configure NDMP server settings, which includes enabling or disabling NDMP and changing the password for accessing the NDMP - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 213
user will be prompted to input the password and the password confirmation. Example The following command enables NDMP: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/nas/ndmp -server nas_0 set -enabled yes -passwd "Password0123" Storage system address: 10.0.0.1 Storage CA -service Mgmt_LDAP - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 214
for binding to the LDAP server. This is the password for the user specified in the Bind DN attribute. Path to search for users on the directory server. For example: ou=People,dc=lss,dc=emc,dc=com. NOTE: On an Active Directory server, a default search path is used. Path to search for groups - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 215
requests. Default value is 10,000 milliseconds, or 10 seconds. Configure LDAP settings Configure LDAP settings to control user access to MyPwd -upload -f /tmp/myldapservercertificate.cer /sys/cert -type CA -service Mgmt_LDAP Format /net/ldap create [{-name | -autoDiscoveryEnabled}] - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 216
password in secure mode - the user will be prompted to input the password. Type the path to search for users on the directory server. For example: ou=People,dc=lss,dc=emc,dc=com NOTE: On an Active Directory server, a default -timeout 40000 Storage system address: 10.64.75.201 Storage system port: - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 217
-userSearchPath "ou=Users,dc=domain,dc=example,dc=com" -groupSearchPath "ou=Groups,dc=domain,dc=example,dc=com" -userIdAttr "uid" -groupNameAttr "cn" -userObjectClass "interOrgPerson" -groupObjectClass "groupOfUniqueNames" -groupMemberAttr "uniqueMember" -timeout 40000 Storage system address: 10 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 218
tmp/myldapservercertificate.cer /sys/cert -type CA -service Mgmt_LDAP Format /net/ldap -id used by the directory server for LDAP communications. By default, LDAP uses port 389, and LDAP over an SSL the distinguished name (DN) for a user with administrator privileges on the LDAP Server. The - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 219
user will be prompted to input the password. Type the path to search for users on the directory server. For example: ou=People,dc=lss,dc=emc,dc=com. NOTE: On an Active Directory server, a default .lss.emc.com -port 389 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 220
address list for the LDAP_1 server configuration: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/ldap -id LDAP_1 refresh Storage system address: 10.64.75.201 Storage system port: 443 HTTPS connection Operation completed successfully. Delete LDAP settings Delete an LDAP setting. Format /net - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 221
sending the packet. Example The following example pings a remote host: uemcli /net/util ping -srcIf if_0 -addr 10.0.0.1 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully Trace route Display the route from the specified interface to a remote - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 222
10.0.0.1 Storage system address: 10.0.0.1 Storage system service. Valid values are: ● disabled ● enabled Username The DHSM user name. Password The DHSM user password. HTTPS enabled Specifies whether SSL (HTTPS) is required for DHSM requests to this DHSM server. Valid values are: ● yes (default - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 223
MyPassword456! /net/nas/dhsm show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: service is enabled. Possible values include: ● Disabled - DHSM service is disabled. ● Enabled - DHSM service is enabled. Specifies the DHSM user name. Specifies the DHSM user password - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 224
DHSM connection. Default value is 30 seconds. File system File system storage resource on user is still able to trigger data migration by using a read or write request from the secondary file system to Unity. Read policy Read policy when the NAS server recalls data from the secondary storage - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 225
digest authentication is required by the secondary storage HTTP server. -secondaryPassword Specifies the password associated with the username required by the secondary storage server. -timeout Specifies the timeout value in seconds. By default, the Unity HTTP client waits 30 seconds for a reply - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 226
/nas/dhsmconn [{-id | -fs }] show Action qualifiers Qualifier -id -fs Description DHSM connection identifier. Specifies the file system storage resource ID. Example 1 The following command shows all DHSM connections for file system "fs_1". uemcli /net/nas/dhsmconn -fs fs_1 show - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 227
mode Sets the mode of Unity DHSM operations on the specified file system. Valid values are: ● enabled (default) - allows both the creation on the Unity can be read and written to in the disabled mode. ● recallOnly - the policy engine is not allowed to create stub files, but the user is still - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 228
client uses if digest authentication is required by the secondary storage HTTP server. Specifies the password associated with the username required by the secondary storage server. Specifies the timeout value in seconds. By default, the Unity HTTP client waits 30 seconds for a reply from the HTTP - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 229
Unity before the connection is deleted. Example The following command deletes the DHSM connection "dhsmconn_1" and specifies the recall policy for any migrated files during the delete operation. uemcli /net/nas/dhsmconn -id dhsmconn_1 delete -recallPolicy no Storage (10)-TBN service is working, but - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 230
A, Reference, for health information details. Indicates whether the TBN service is active. Valid values are: ● yes ● no View TBN prevents this situation and can increase the availability of your storage system. Table 67. TBN configuration attributes Attribute Enabled Description Indicates - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 231
following command shows details for the TBN configuration: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/tbn/config show Storage system address: 10.64.75.201 Storage system port: 443 HTTPS connection 1: Enabled Active TBN = yes = 42389FCA-01D1-4491-7D77-8060373D67B8 Change tie breaker - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 232
Example 3: Change the active TBN uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/tbn/config set -activeTbn 42389FCA-01D1-4491-7D77-8060373D67B8 Storage system address: 10.64.75.201 Storage system port: 443 HTTPS connection Operation completed successfully 232 Configure Network Communication - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 233
Type Subnet mask for the host. Type of host configuration. Value is one of the following: ● host - A host defines and controls access to storage resources on a host-by-host basis. ● subnet - A subnet is a logical grouping of connected network devices. Devices on a subnet share contiguous ranges of - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 234
storage access for hosts on a particular network segment. ● netgroup - A netgroup is a named sets of hosts, users specified (default) or there could be a problem. ● Degraded/Warning services. ● Other - The host is automatically created on the storage system. ● Manual - The host is created manually - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 235
to define and control storage access for hosts on a particular network segment. ● netgroup - A netgroup is a named sets of hosts, users, or domains on . NOTE: If not specified, the host is created in the default network namespace and the tenant attribute will be blank. Specifies the hostnames - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 236
MyPassword456! /remote/host create -name MyHost -descr "accounting" -type host -addr 10.64.74.10 -osType winxp Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = Host_1014 Operation completed successfully. Example 2 The following command creates a host configuration for - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 237
The following command lists all host configurations on the system: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /remote/host show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = 1014 Name = MyHost Description = this is my host Tenant = tenant_3 Type - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 238
For subnet type, specifies the new IP address of the subnet. ● For netgroup, specifies the new netgroup's name. ● Format: /[]. ● Default prefix length for IPv4 addresses is 24 and for IPv6 addresses is 64. NOTE: This information is required when connecting hosts to network - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 239
connections associated with the configuration. Hosts that use the configuration for NFS-based storage connections, such as NFS shares, revert to the default access privileges for any storage resources that they can access. Format /remote/host {-id | -name } delete Object qualifier - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 240
system port: 443 HTTPS connection Operation completed successfully. Manage host LUNs Host LUNs are the storage resources that belong to the hosts connected to the storage system. There are two types of host LUNs: ● Production LUNs- Read/write LUNs used for data access. ● Snapshot LUNs - Read - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 241
all host LUNs on host Host_3: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /remote/host/hlu -host Host_3 show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = Host_3_sv_2_prod Host = Host_3 Host name = 10.0.0.2 LUN = sv_2 LUN name = joeslun - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 242
/host/hlu -id Host_3_sv_2_prod set -lunid 0 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully attributes Attribute Description ID ID of the host group. Name User-assigned name of the host group. Description Description of the host - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 243
entire host group will have access to LUN 4. Valid values are: ● yes ● no (default) -addLuns Type a comma-separated list of the IDs for any additional LUNs that you want group" -hosts Host_1,Host_2,Host_3 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Manage Hosts 243 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 244
of all the host groups on the system. uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /remote/hostgroup show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = HostGroup_1 Name = MyHostGroup Description = this is my host group Type = General - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 245
how host access to LUNs should be merged for new hosts when they are added to the pre-existing host group. Valid values are: ● fromHostGroup (default)-LUNs accessible by all hosts in the existing host group will also be accessible by the newly added hosts. ● toHostGroup-LUNs accessible by all hosts - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 246
to existing HostGroup_1. uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /remote/hostgroup -id HostGroup_1 set -addHosts Host_8 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = HostGroup_1 Operation completed successfully. Delete a host group Delete a host group - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 247
! /remote/hostgroup -id HostGroup_2 delete Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation separated list of hosts in the host group that cannot access the LUN. Default Host LUN ID The default host LUN ID to be used when adding new hosts to the host - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 248
: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = HostGroup_1_sv_1_prod Host group = HostGroup_1 Host group name = testhg LUN = sv_1 LUN name = testLuns-1 LUN type = Production Accessible hosts = Host_1,Host_2 Host LUN IDs = 1,1 Inaccessible hosts = Host_3 Default Host - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 249
CHAP authentication password associated with (7) - Working correctly, but there could be a problem. ● Degraded/Warning (10) - Working and performing details. CHAP users List of default) - Open native (such as CLARiiON Open) ● SGI - Silicon Graphics ● HPNoAutotrespass- HP without Auto-trespass ● Dell - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 250
(default) ● no Unit serial number Indicates the unity serial number. Values are: ● Array (default) ● LUN For SCSI-3 interfaces, the Unity Serial [-sourceType {HPAutotrespass | OpenNative | SGI | HPNoAutotrespass | Dell | FujitsuSiemens | Tru64}] [-failoverMode {AutoTrespass | PassiveNotReady | - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 251
Unit Serial Number. Valid values are: ● Array (default) ● LUN For SCSI-3 interfaces, the Unity Serial Number page (Vital Product Data page 0x80) :FD:10:00:00:00:C9:29:0F:FD" -type fc Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = 1021 Operation completed successfully. - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 252
Storage system port: 443 HTTPS connection 1: ID Host UID Initiator type Ports logged in Ignored Health State Health Details CHAP users value>] [-sourceType {HPAutotrespass | OpenNative | SGI | HPNoAutotrespass | Dell | FujitsuSiemens | Tru64}] [-failoverMode {AutoTrespass | PassiveNotReady | - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 253
HPNoAutotrespass - HP without Auto-trespass ● Dell ● FujitsuSiemens ● Tru64 - Compaq Tru64 ● Array ● LUN For SCSI-3 interfaces, the Unity Serial Number page (Vital Product Data page 0x80) reports setting a new host when there are already storage resources associated with the host and attached to - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 254
ESX push. ● ESX - ESX pushed the initiator registration to the storage system. Comma-separated list of the session IDs for this path. Working correctly. ● OK BUT (7) - Working correctly, but there could be a problem. ● Degraded/Warning (10) - Working and performing all functions, but the performance - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 255
account to authenticate a host (initiator) attempting to access an iSCSI storage resource (target). CHAP authentication can be one of the following: level of security. To set reverse CHAP, specify a reverse secret password. Manage reverse CHAP for mutual CHAP authentication explains how to configure - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 256
by the storage system. -username Specifies the CHAP username. -secret Specifies the CHAP secret password. -secretSecure Specifies the CHAP secret in secure mode - the user will be prompted to input the password. -secretFormat Specifies the CHAP input format. Valid values are: ● ascii(default - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 257
10.0.0.1 -u Local/joe -p MyPassword456! /remote/iscsi/chap show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = CHAP_1 IQN = iqn username. Specifies the CHAP secret password. Specifies the CHAP secret in secure mode - the user will be prompted to input the - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 258
format Example The following command updates the secret password for iSCSI CHAP account CHAP_1: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /remote/iscsi/chap -id CHAP_1 set -secret abcdef123456 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 259
10.0.0.1 -u Local/joe -p MyPassword456! /remote/iscsi/connection create -name myConn -descr "Connection for lun_1 importing" Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = iscsi_conn_1 Operation completed successfully. View iSCSI connection settings View details for - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 260
This example shows all iSCSI connections. uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /remote/iscsi/connection show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID Name Description = iscsi_conn_1 = Old Array = LUN 1 import Change iSCSI connection - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 261
Manage iSCSI connection paths The connection iSCSI path to a remote system includes IP address, TCP port, and a list of iSCSI interfaces on the storage system from which outgoing iSCSI connections are established. An iSCSI connection can have one or more iSCSI paths configured. NOTE: If the source - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 262
iSCSI interfaces List of identifiers of the iSCSI interfaces on the local storage system. Create an iSCSI connection path Creates a new iSCSI path and address. Unity does not support iSCSI redirection. -port -if The default TCP port is 3260. If the port number is different from the default, type - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 263
iscsi/connection/path -connection iscsi_conn_1 show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: Index with that iSCSI connection are also deleted. You do not need to manually the delete the paths. Format /remote/iscsi/connection/path {-connection - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 264
(0x840D) Model Model number of the remote system. Serial number Health state Serial number of the remote system. Health state of the storage resource. The health state code appears in parentheses. Value is one of the following: ● OK (5)-Resource is operating normally. ● Degraded/Warning (10 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 265
used to access the system. Source user password For storage systems that are the source in a replication session, the user password that is used to access the replication sessions with source role having data transfer due to RPO or manual sync on this remote system. NOTE: This attribute is used for - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 266
username that is used to access the system. -srcPassword For systems that are the source in a replication, type the user password that is used to access the system. -srcPasswordSecure Specify the password in secure mode. Once you run the command with this qualifier, you will be asked to type the - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 267
RS_1: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /remote/sys -id RS_1 verify Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. View settings for remote storage systems View the configuration for a remote system on the local system - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 268
Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = RS_0 Name = FNM00151702099 Address = 10.245.252.229 Model = Unity that you have the appropriate interface types configured to support both asynchronous replication (eth2, eth3) and synchronous replication - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 269
user password that is used to access the remote system. -dstPasswordSecure Specify the password in secure mode. The user is prompted to specify the password 64.74.2" -dstUsername Local/joe -dstPassword Password456! Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = RS_1 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 270
. Example The following command executes a cabinet level unplanned failover replication operation issued for a Unity system: uemcli /remote/sys -id RS_1 failover Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = RS_1 Operation completed successfully. NOTE: After an - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 271
system is used by default. Valid values (case insensitive) are: ● sync ● async ● both Example The following command executes a pause replication session for a Unity system: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /remote/sys -id RS_1 pause -sessionType sync Storage system address: 10 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 272
system is used by default. Valid values (case insensitive) are: ● sync ● async ● both Example The following command executes a resume replication session for a Unity system: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /remote/sys -id RS_1 resume -sessionType async Storage system address: 10 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 273
. NOTE: It is recommended that you create a new user with the /user/account command and set the role to vmadmin. The storage system can be registered as a VASA provider with only one vCenter at a time. -localPasswd -localPasswdSecure Specify the password of the system account that will be used by - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 274
[email protected] -passwd xxx -descr "Add vCenter" Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = VC_1 Operation completed VMware administrator password. Specifies the password in secure mode - the user will be prompted to input the password. Specifies the - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 275
system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = VC_1 Operation completed successfully. Delete an existing vCenter server Removes an existing VMware vCenter server and its associated ESXi hosts. NOTE: If the Unity system is registered as a VASA provider in vCenter and you - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 276
-scanHardware Storage system address: 10.0.0.1 Storage system port Password Description ID of the ESXi host. Name of the ESXi host. Domain name or IP address of ESXi host. Identifier of the VMware VCenter server managing the ESXi host. Name of the user account on the ESXi host. Password of the user - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 277
Specifies the password in secure mode - the user will be prompted to input the password. -descr Specifies the description of the VMware ESXi host. -resolveConflicts Specifies the option to resolve IP address or initiator conflicts interactively. Valid values are yes or no (default). Example - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 278
and/or description. In order to execute this command the user must have account on the storage system. Format /virt/vmw/esx -id set password used to access the VMware ESXi host. -passwdSecure Specifies the new password in secure mode - the user will be prompted to input the password - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 279
Description Identifies the ESXi host. Example uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /virt/vmw/esx -id ESX_1 delete Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. View all existing ESXi hosts Displays a list of all configured - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 280
.10.10.101 NFSv4 supported = no NFS username password in secure mode - the user will be prompted to input the password. Adds all discovered ESXi hosts automatically. Example uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /virt/vmw/esx discover -vc VC_1 Storage system address: 10.0.0.1 Storage - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 281
to discover additional ESXi hosts. uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /virt/vmw/esx refresh -scanHardware Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Virtual machine Manage VMware virtual machines. The following table - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 282
joe -p MyPassword456! /virt/vmw/vm -esx ESX_1 show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = VM_1 Name disk Manage hard disk properties for VMware virtual machines stored on the Unity system. The following table lists the attributes for VM hard disks. - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 283
Displays hard disk properties for a specified virtual machine stored on the Unity system. Format /virt/vmw/vmdevice -vm show Object qualifier joe -p MyPassword456! /virt/vmw/vmdevice -vm VM_1 show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: Name = Hard - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 284
state values for the storage processor in Service/Rescue mode. Table 83. Storage processor health state values (Service/Rescue mode) Code Degraded/Warning ● A user has placed the SP into the Service mode. 20 Major failure ● The system software on this SP has encountered a problem. ● The CPU in - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 285
Table 83. Storage processor health state values (Service/Rescue mode) (continued) Code Health state Reason(s) the SP and a link control card on a disk array enclosure. ● A FLARE DB drive in the storage processor has faulted. ● One of the first four drives have mismatched types. ● One of the first - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 286
following command displays existing SP for a virtual system. uemcli -d 10.0.0.2 -u Local/joe -p MyPassword456! /env/sp show -detail Storage system address: 10.0.0.2 Storage system port: 443 HTTPS connection 1: ID = spa UUID = 421DB2B2-6AAC-BB48-73DE-513390292444 DPE = dpe Slot = 0 Name - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 287
deployment. uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /env/disk show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = DISK_0 Enclosure = DAE_1 Slot = 0 Health state = OK (5) User capacity = 2199023255552 (2T) Used by FAST Cache = no Pool ID - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 288
Local/joe -p MyPassword456! /env/disk show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = dae_1_2_disk_59 Enclosure Capacity = 881132310528 (820.6G) Rotational speed = 10000 rpm User capacity = 797989670912 (743.1G) Used by FAST Cache = no - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 289
10.0.0.1 -u Local/joe -p MyPassword456! /env/disk show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = vdisk_1 SCSI ID SPA = capacity Capacity = 268435456000 (250.0G) Rotational speed = User capacity = 268435435520 (249.9G) Pool ID = pool_1 Pool - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 290
the ID "vdisk_1". uemcli -d 10.0.0.2 -u Local/joe -p MyPassword456! /env/disk -id vdisk_1 set -name "Highperformance storage" Storage system address: 10.0.0.2 Storage system port: 443 HTTPS connection Operation completed successfully. Manage battery (physical deployments only) The following table - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 291
. Example The following command displays a list of system batteries: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /env/bat show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = Bat_0 SP = SPA Slot = 0 Health state = OK (5) 2: ID = Bat_0 SP = SPA - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 292
The following command displays a list of system power supplies: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /env/ps show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = Pow_0 Enclosure = DPE SP = SPA Slot = 0 Health state = OK (5) 2: ID = Pow_1 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 293
Example The following command displays a list of system LCCs: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /env/lcc show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = LCC_0 DAE = DAE_0 Slot = 0 Health state = OK (5) 2: ID = LCC_1 DAE = DAE_0 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 294
1: ID = spa_ssd_0 SP = spa Slot = 0 Name = SP A Internal Disk 0 Type = SATA Health state = OK (5) Health details = "The component is operating normally. No action is required." Manufacturer = Model = Intel DC 3500 Series SSDs M.2 Part number = INTEL SSDSCKHB080G4M 118000039 Serial - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 295
The following command displays a list of system DAEs: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /env/dae show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = dae_0_1 Name = DAE 0 1 Health state = OK (5) Health details = "The component is - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 296
) The following command displays the system DPE information: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /env/dpe show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = dpe Name = DPE Health state = OK (5) Health details = "The component is - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 297
The following command displays a list of system memory modules: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /env/mm show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = MM_SPA_0 SP = SPA Slot = 0 Health state = OK (5) 2: ID = MM_SPA_1 SP = SPA - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 298
displays the details of the system status card. uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /env/ssc show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = dae_0_3_ssc Enclosure = dae_0_3 Slot = 0 Name = DAE 0 3 System Status Card Health - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 299
following command displays a list of system cache cards: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /env/fan show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = dpe_fan_a0 Enclosure = dpe Slot = 0 Name = DPE Cooling Module A0 Health state - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 300
-array enclosure. NOTE: Embedded modules and 4-port cards are only available on Unity 480/480F, Unity 680/680F, and Unity 880/880F systems. You can view details about each I/O module, embedded module, and 4-port card installed in the system, such as the health state. Commit a newly added component - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 301
displays details about the two I/O modules in the system: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /env/iomodule show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = IO_SPA_0 SP = SPA Slot = 0 Health state = OK (5) 2: ID = IO_SPA_1 SP = SPA - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 302
Example 2 The following command displays details about an embedded module and 4-port card in a Unity 680 system: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /env/iomodule show 1: ID = spb_iopm_0 SP = spb Slot = 0 Name = SP B Embedded Module 0 Health state = OK (5) Health details = " - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 303
supported physical deployments only) • Manage FAST Cache storage objects (physical deployments only) • View storage storage system capacity settings • Manage system tier capacity settings • Manage file systems • Manage user FAST VP/FAST Cache license is not installed ● No other pools have been created - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 304
settings that the system will apply when you run this command. NOTE: All disks on the system will be used to configure storage pools automatically. You must explicitly confirm this operation to proceed. Format /stor/config/auto set Action qualifier Qualifier -async Description Run action - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 305
View configuration settings for automatic pool creation View the settings for automatic pool creation that will be applied to the system. Initiate automatic storage pool configuration explains how to apply these settings to the system. NOTE: The show action command explains how to change the output - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 306
storage resources can subscribe to more storage than is actually allocated to them, pools can be over provisioned to support more storage including the number of drives of each type, in the pool. If FAST VP is installed, you can mix different types of drives to make a tiered pool. However, SAS Flash - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 307
degraded due to one or more of the following: ○ Pool has exceeded the user-specified threshold. ○ Pool is nearing capacity. ○ Pool is almost full. ○ Valid values are: ● yes ● no Non-base size used Quantity of storage used for thin clone and snapshot data. Auto-delete state Indicates the state - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 308
Data Reduction space saved (physical deployments only) Storage size saved on the pool by using data Unity hybrid models running OE version 5.2.x or later. The default pool type is dynamic. ● Traditional pools are supported in all Unity hybrid and virtual models. They are also supported in Unity - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 309
. Type a name for the pool. (Available only for systems that support dynamic pools) Specify the type of pool to create. Value is one storage profiles (physical deployments only) explains how to view the IDs of available storage profiles on the system. If this option is not specified, a default - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 310
the pool. Value is one of the following: ● yes ● no Default value is yes. Indicate whether the system should check the pool full high command creates a traditional pool in models that support dynamic pools. This example uses storage profiles tprofile_1 and tprofile_2, five drives from drive - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 311
completed successfully. Example 3 (physical deployments only) The following command creates a traditional pool in models that do not support dynamic pools. This example uses storage profiles profile_19 and profile_20, five drives from drive group dg_15, and nine drives from drive group dg_16. The - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 312
the following: ● yes ● no Specify the pool full high watermark for the pool. Valid values are 1-99. Default value is 95. Specify the pool full low watermark for the pool. Valid values are 0-98. Default value is 85. Indicate whether the system should check the snapshot space used high water mark for - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 313
trigger auto-delete on the pool. Valid values are 0-98. Default value is 20. Specify whether to pause snapshot auto-delete. ● To extend a hybrid pool when data reduction and advanced deduplication are enabled for a storage resource in the pool, the percentage of Flash drives in the pool must be 10% - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 314
drives. When creating a traditional pool, you can specify HDD system drives. Type the IDs of the storage profiles, separated by commas, to apply to the pool. If this option is not specified, a default RAID configuration is selected for each particular drive type in the selected drive group: ● NL-SAS - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 315
Local/joe -p MyPassword456! /stor/config/pool show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = pool_13 Type = 31% Alert threshold = 70% Drives = 6 x 600.0G SAS; 6 x 400.0G SAS Flash 3 Number of drives = 12 RAID level = 5 Stripe length = - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 316
supports dynamic pools. uemcli -d 10.0.0.2 -u Local/joe -p MyPassword456! /stor/config/pool show -detail [Response] Storage system address: 10.0.0.2 Storage 0% Alert threshold = 70% Drives = 9 x 1.6T SAS Flash 3; 5 x 400.0G SAS Flash 2 Number of drives = 14 RAID level = 5 Stripe length - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 317
Subscription = 0 Subscription percent = 0% Alert threshold = 70% Drives = 6 x 400.0G SAS Flash 2 Number of drives = 6 RAID level = 5 Stripe length -p MyPassword456! /stor/config/pool show -detail Storage system address: 10.0.0.3 Storage system port: 443 HTTPS connection 1: ID Name - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 318
elements. Example The following deletes pool pool_1: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /stor/config/pool -id pool_1 delete Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Manage FAST VP pool settings Fully Automated - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 319
the following: ● Manual - Data relocation was initiated by the user. ● Scheduled . ● High - Most impact on system performance. Default value is medium. NOTE: This field is blank :[value] where: ● tier_name - Identifies the storage tier. ● value - Identifies the amount of data in - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 320
schedule on pool pool_1: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /stor/config/pool/fastvp -pool pool_1 set -schedEnabled yes Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Pool ID = pool_1 Operation completed successfully. View FAST VP pool settings View FAST - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 321
system: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /stor/config/pool/fastvp -show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: Pool = pool_1 Relocation type = manual Status = Active Schedule enabled = no Start time = 2013-09-20 12:55:32 End - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 322
format is: [HH:MM] where: ● HH - Hour. ● MM - Minute. Default value is eight hours from the current time. -rate Specify the transfer rate for the fastvp -pool pool_1 start -endTime 04:00 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 323
-d 10.0.0.1 -u Local/joe -p MyPassword456! /stor/config/pool/fastvp -pool pool_1 stop Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Manage pool tiers Storage tiers allow users to move data between different types of drives in a pool to - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 324
details about the specified pool: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /stor/config/pool/tier -pool pool_1 show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: Name = Extreme Performance Drives = 6 x 800.0G SAS Flash 2 Drive type = SAS Flash - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 325
. Valid values are: ● LUN ● File system ● LUN group ● VMware NFS ● VMware VMFS ● NAS server Name of the pool. Total space in the pool used by a storage resource. This includes primary data used size, snapshot used size, and metadata size. Space in the pool can be freed if snapshots and thin clones - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 326
= "The component is operating normally. No Manage FAST VP general settings Fully Automated Storage Tiering for Virtual Pools (FAST VP) is a storage efficiency technology that automatically moves data between storage tiers within a pool based on data access patterns. The following table lists the - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 327
Medium - Moderate impact on system performance. ● High - Most impact on system performance. Default value is medium. NOTE: This field is blank if data relocation is not in progress . -paused Specify whether to pause data relocation on the storage system. Valid values are: ● yes ● no -schedEnabled - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 328
- Hour ● MM - Minute Valid values are between 00:00 and 23:59. Default value is eight hours after the time specified with the -at parameter. Specify the Mon,Fri" -at 23:00 -until 07:00 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 329
(1.5T) Estimated scheduled relocation time = 7h 30m Manage FAST Cache (supported physical deployments only) FAST Cache is a storage efficiency technology that uses drives to expand the cache capability of the storage system to provide improved performance. The following table lists the attributes - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 330
Cache parameters for a medium endurance Flash drive: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /stor/config/fastcache show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: Total space Drives Number of drives RAID level Health state Health details - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 331
/stor/config/fastcache shrink [-async] -so Action qualifier Qualifier -async -so Description Run the operation in asynchronous mode. Specify the comma-separated list of storage objects to remove from the FAST Cache. Run the /stor/config/fastcache/so show command to obtain a list of all - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 332
and drives that are in the FAST Cache. Table 103. FAST Cache storage object attributes Attribute Description ID Identifier of the storage object. Type Type of storage object. RAID level RAID level applied to the storage object. Drive type Type of drive. Number of drives Number of drives - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 333
is identified by an ID. The following table lists the attributes for storage profiles. Table 104. Storage profile attributes Attribute Description ID ID of the storage profile. Type (Available only for systems that support dynamic pools) Type of pool the profile can create. Value is one - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 334
] show Object qualifier Qualifier Description -id Type the ID of a storage profile. -driveType Specify the type of drive. -raidLevel Specify the RAID type of the profile. -traditional (Available only for systems that support dynamic pools) Specify this option to view the profiles that you - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 335
to configure = Maximum capacity to configure = Example 2 The following command shows details for storage profiles that can be used to create traditional pools in models that support dynamic pools: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /stor/config/profile -traditional -configurable - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 336
drive group ID. NOTE: The show action command explains how to change the output format. Format /stor/config/dg [-id ] [-traditional] show 336 Manage Storage - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 337
Local/joe -p MyPassword456! /stor/config/dg show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = dg_11 Drive that can be used to configure traditional pools in models that support dynamic pools: NOTE: For dynamic pools, the Unconfigured drives value - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 338
of spares = 1 View recommended drive group configurations View the recommended drive groups from which to add drives to a pool based on a specified storage profile or pool type. NOTE: The show action command explains how to change the output format. Format /stor/config/dg recom {-profile - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 339
is available for thin LUNs and thin file systems. The thin file systems must be created on Unity systems running version 4.2.x or later. Data Reduction percent Specifies the storage percentage saved on the entire system when using data reduction. NOTE: Data reduction is available for thin - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 340
maintain and manage the file systems. You create network shares on the file system, which connected hosts map or mount to access the file system storage. When creating a file system, you can enable support for the following network shares: ● SMB shares (previously named CIFS shares), which provide - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 341
have failed. ○ The associated NAS server has failed. ● Major failure (20)-One or both of the following may have occurred: ○ One or more of its storage pools have failed. ○ File system is unavailable. ● Critical failure (25)-One or more of the following may have occurred: ○ One or more of its - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 342
or no. Default is no. All storage pools support both standard and thin provisioned storage resources. For standard storage resources, file systems must be created on Unity systems running version 4.2.x or later. Data Reduction percent Total file system storage percentage saved for the thin file - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 343
is not supported on the file system. Valid values are: ● yes ● no (default) NOTE: The thin file systems must be created on a Unity system running distribution CIFS synchronous write If enabled, the quantity of primary storage currently allocated through thin provisioning. Space reserved from the - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 344
use the Windows file systems to provide storage for database applications. The Unisphere online network. ● This feature is enabled by default for Windows (SMB) file systems. Unless When enabled, Windows applications receive notifications each time a user writes or changes a file on the SMB share - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 345
the current date must be less than the maximum retention period of 2106-Feb-07. FLR default retention period Indicates the default retention period that is used in an FLR-enabled file system when a file is locked and be locked and protected from deletion. Values are: ● d: days Manage Storage 345 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 346
as a percentage. When exceeded, error alert messages will be generated. The default value is 95%. If the threshold value is set to 0, this alert provides details on using size qualifiers to specify a storage size. Prerequisites ● Configure at least one storage pool for the file system to use and - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 347
680, and 880 systems (Option available on a Unity system running OE version 4.1.) Specify the minimum size to allocate for the thin file system. Automatic and manual file shrink operations cannot decrease the file system size lower than this value. The default value is 3G, which is the minimum thin - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 348
default) -cifsOpLocks Enable opportunistic file locks (oplocks) for CIFS network shares. Valid values are: ● yes (default) ● no -cifsNotifyOnWrite Enable to receive notifications when users relocates portions of the storage resource's data based on the storage resource's performance statistics - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 349
Type the ID of a protection schedule to apply to the storage resource. View protection schedules explains how to view the IDs enabled file system. Values are: ● d: days ● m: months ● y: years ● infinite (default) The value should be greater than 1 day. Any non-infinite values plus the current date - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 350
pool. ● Uses NAS server nas_2 as the parent NAS server. ● Primary storage size is 3 GB. ● Supports multiprotocol network shares. ● Has a native access policy. ● Is a replication destination. The file system receives the ID res_28: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /stor/prov/fs - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 351
settings Change the settings for a file system. NOTE: Size qualifiers explains how to use the size qualifiers when specifying a storage size. Format /stor/prov/fs {-id | -name } set [-async] [-descr ] [-accessPolicy {native | Unix | Windows}] [-folderRenamePolicy {allowedAll - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 352
the locking policy for the file system. Valid values are: ● mandatory (default) ● advisory -size Type the amount of storage in the pool to reserve for the file system. -minSizeAllocated (Option available on a Unity system running OE version 4.1.) Specify the minimum size to allocate for the - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 353
pools and Hybrid Flash pools in Unity Hybrid 380, 480, 680, and -cifsNotifyOnWrite Enable to receive notifications when users write to a CIFS share. Valid default)-Sets the initial data placement to the highest-performing drives with available space, and then relocates portions of the storage - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 354
default compliance) default is 1 year--1y) ● infinite - FLR-E (enterprise) default Any m: months ● y: years ● infinite (default) The value should be greater than 1 the default retention to 99, and the default value is 95%. If 0 to 99, and the default value is 75%. If the the default value is 0 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 355
. Back up the data from a file system before deleting it from the storage system. NOTE: You cannot delete an FLR-C enabled file system that has currently the file system itself. Valid values are: ● yes ● no (default) -async Run the operation in asynchronous mode. Example The following command - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 356
are set at the file-system level. ● Create a user quota on a quota tree to limit or track the amount of storage space that an individual user consumes on that tree. When you create a user quota on a quota tree, you have the option to use the default hard and soft limits that are set at the - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 357
-fs -path show If a soft limit or hard limit has not been specified for the user, the default limit is applied. -softLimit Specify the preferred limit on storage usage by the user. A value of 0 means no limitation. If the hard limit is specified and the soft limit is not specified - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 358
fs res_1 -path /qtree_1 unixName nasadmin show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: User ID = 201 Unix name = nasadmin Windows names = dell\nasadmin, dell\nasad Windows SIDs = S-1-5-32-544, S-1-5-32-545 Space used = 32768 (32K) Soft limit - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 359
config -fs -path show If a soft or hard limit has not been specified for the user, the default limit is applied. -softLimit Specify the preferred limit on storage usage by the user. A value of 0 means no limitation. If the hard limit is specified and the soft limit is not specified - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 360
has a quota applied to it, which limits or tracks the total storage space consumed that directory. The hard limit, soft limit, and grace period settings you define for a quota tree are used as defaults for the quota tree's user quotas. You can override the hard and soft limit settings by explicitly - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 361
available, even if the hard limit has not been reached. State of the user quota. Valid values are: ● OK ● Soft limit exceeded ● Soft limit Use the View quota trees command to view these default limits. -softLimit Specify the preferred limit for storage space consumed on the quota tree. A value - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 362
200 GB. uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /quota/tree create -fs res_1 -path / qtree_1 -softLimit 100G -hardLimit 200G Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. View quota trees You can display space usage and limit - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 363
that a specific quota tree inherit the associated file system's default quota limit settings, or you can manually set soft and hard limits on the quota tree. Format of 0 means no limitation. -hardLimit Specify the absolute limit for storage space consumed on the quota tree. A value of 0 means - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 364
all quota trees on file system res_1: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /quota/tree -fs res_1 refresh / [Response] Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Delete quota trees You can delete all quota trees on a file - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 365
/tree -fs res_1 -path /qtree_1 delete Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed default limits for a file system or quota tree, setting a default grace period, and disabling the enforcement of space usage limits for a quota tree and user - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 366
in order to allow IO to continue after the soft limit is exceeded (until the hard limit is reached). Default soft limit Default hard limit Tree quota update time User quota update time Default preferred limit on storage usage for user quotas on the file system, quota trees in the file system, and - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 367
cannot write to the file system or quota tree until more space becomes available for that user. The default grace period is 7 days. The format is: where: ● value - An integer value, depending on down using the older grace period value will not be affected. Manage Storage 367 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 368
file system. The system issues a warning when the soft limit is reached. -defaultHard Specify the default hard limit for on storage usage for user quotas on the file system, quota trees in the file system, and user quotas on the file system's quota trees. If the hard limit is reached for a quota - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 369
Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: Path = / Quota policy = blocks User quota = on Deny access = yes Grace period = 7d User soft limit = 53687091200 (50G) User provide access to. Default is /root of the file system. A local path must - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 370
parent file system associated with the NFS share. Default share access settings for host configurations and for unconfigured Hosts have read/write root access to primary storage and snapshots associated with the share. This includes to allow users to set the setuid and setgid Unix permission bits. - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 371
that arrive with a user ID of 0 (zero), which is typically associated with the user name root. The default value is 4294967294 (-2), which is typically associated with the nobody user (root squash). Creation prepend the name with @. Otherwise, it is considered to be a host name. Manage Storage 371 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 372
to Read/Write will result in an effective host access of Read/Write. ● Example 2: If the default access setting for the share is Read-Only, setting the access permission for a particular host configuration to No . The initial share is created on the root of the file system. 372 Manage Storage - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 373
access to primary storage and snapshots security levels are supported, and can be Default when secure NFS is configured for the NAS server. ● krb5i - Kerberos v5 authentication and integrity. ● krb5p - Kerberos v5 authentication and integrity; encryption is enabled. Specifies whether to allow users - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 374
default) - Users can set the setuid and setgid Unix permission bits. This allows users to run the executable with privileges of the file owner. ● no - Users -name testnfs112 -fs res_26 -path "/mypath" Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = NFSShare_20 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 375
system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = NFSShare_1 Name = MyNFSshare1 Description = My nfs share File system = res_26 Local path = /mypath Export path = SATURN.domain.emc.com:/MyNFSshare1 Default access = na Advanced host mgmt. = yes Read-only - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 376
access to primary storage and snapshots associated with the share. ● root-Hosts have read/write root access to primary storage and snapshots associated (advanced host management). Values are (case insensitive): ● yes (default)-Hosts lists contain the IDs of registered hosts. ● no-Host lists - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 377
. All higher security levels are supported, and can be enforced by the default)-Users can set the setuid and setgid-Unix permission bits. This allows users to run the executable with privileges of the file owner. ● no-Users naHosts "HOST_1" Storage system address: 10.0.0.1 Storage system port: 443 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 378
shares use the SMB (formerly known as CIFS) protocol to provide an access point for configured Windows hosts, or IP subnets, to access file system storage. SMB network shares are associated with a SMB file system. Each SMB share is identified by an ID. The following table lists the attributes for - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 379
on a share to include only those that the requesting user has access to. ● no (default) DFS enabled Indicates whether Distributed File System (DFS) is > ] [-enableABE {yes | no} ] [-enableBranchCache {yes | no}] [offlineAvailability {none | documents | programs | manual} ] Manage Storage 379 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 380
folder name within the share that was created from the host-side. The default path is the root of the file system. Local paths must point from offline cache, even when connected to the network. ● manual - Allows only specified files to be available offline. Example The root "/". 380 Manage Storage - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 381
for all CIFS network shares on the system: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /stor/prov/fs/cifs show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = SMBShare_1 Name = fsmup Description = File system = res_1 Local path = / Export path - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 382
{none | documents | programs | manual} ] Object qualifiers Qualifier -id default users open to be available offline. ● programs - Allows all programs and files that users open to be available offline. Programs and files will open from offline cache, even when connected to the network. ● manual - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 383
port: 443 HTTPS connection Operation completed successfully. Manage LUNs A LUN is a single unit of storage that represents a specific storage pool and quantity of Fibre Channel (FC) or iSCSI storage. Each LUN is associated with a name and logical unit number identifier (LUN ID). The following - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 384
size of the LUN. Identifies whether thin provisioning is enabled. Valid values are: ● yes ● no (default) All storage pools support both standard and thin provisioned storage resources. For standard storage resources, the entire requested size is allocated from the pool when the resource is created - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 385
supported on the LUN. Valid values are: ● yes ● no (default) NOTE: Advanced deduplication is available only on: ● Dynamic or Traditional pools in Unity currently paused. World Wide Name of the LUN. Identifies whether the storage resource is a destination for a replication session (local or remote). - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 386
data during data relocation operations. Valid values (case-insensitive): ● startHighThenAuto (default)-Sets the initial data placement to the highestperforming drives with available space, and then relocates portions of the storage resource's data based on I/O activity. ● auto-Sets the initial data - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 387
for the LUN. (Not applicable when creating a thin clone) Enable thin provisioning on the LUN. Valid values are: ● yes ● no (default) Type the ID of a protection schedule to apply to the storage resource. View protection schedules explains how to view the IDs of the schedules on the system. Pause the - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 388
only after data reduction has been enabled. An empty value indicates that advanced deduplication is not supported on the LUN. Valid values are: ● yes ● no (default) When advanced deduplication is enabled for a storage resource in a hybrid pool, the percentage of Flash drives in the pool must be 10 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 389
uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /stor/prov/luns/lun create -name "MyTC" -descr "My FC" -type tc -source SNAP_1 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = lun_3 Operation completed successfully. View LUNs Display the list of existing LUNs. NOTE - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 390
system port: 443 HTTPS connection 1: ID = sv_1 Name = AF LUN 1 Description = Group = Storage pool ID = pool_1 Storage pool = Pool 1 Type = Primary Base storage resource = sv_1 Source = Original parent = Health state = OK (5) Health details = "The LUN is operating normally - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 391
the LUN is not assigned to a consistency group. Type the quantity of storage to allocate for the LUN. (Not applicable to thin clones) Remove the the protection schedule from the LUN. (Not applicable to thin clones) Specify the default owner of the LUN. Valid values are: ● spa ● spb (Not applicable - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 392
setting, and then relocates portions of the storage resource's data based on the storage resource's performance statistics such that data is not supported on the LUN. Valid values are: ● yes ● no (default) NOTE: Advanced deduplication is available only on: ● Dynamic or Traditional pools in Unity - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 393
-u Local/joe -p MyPassword456! /stor/prov/luns/lun -id lun_1 set -name NewName -descr "My new description" -size 150M Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = lun_1 Operation completed successfully. Example 2 The following command adds access for two new hosts - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 394
along with the LUN itself. Valid values are: ● yes ● no (default) Run the operation in asynchronous mode. Example The following command deletes LUN ! /stor/prov/luns/lun -id lun_1 delete Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 395
Type Type of consistency group. Value is one of the following (case insensitive): ● Primary ● Thin clone (tc when used with the -create command.) Base storage resource (Applies to thin clones only) ID of the base consistency group for the thin clone. Source (Applies to thin clones only) ID of - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 396
or no. Default is no. All storage pools support both standard and thin provisioned storage resources. For standard storage resources, the Unity 380F, 480F, 680F, and 880F systems ● Dynamic pools in Unity All-Flash 450F, 550F, and 650F systems ● All-Flash pools and Hybrid Flash pools in Unity Hybrid - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 397
for each LUN in the consistency group. Valid values (case-insensitive): ● startHighThenAuto (default)-Sets the initial data placement to the highest- performing drives with available space, and then relocates portions of the storage resource's data based on I/O activity. ● auto-Sets the initial data - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 398
of the application that will use it, which can facilitate how the storage resource is managed and monitored through Unisphere. -descr Type a brief the type of consistency group. Valid values are (case insensitive): ● primary (default) ● tc -source (Applies to thin clones only) Specify the ID of - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 399
uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /stor/prov/luns/group show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID Name Description Type Base storage resource Source Original parent Health state Health details action is required." Total - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 400
: 55%, Performance: 10%, 2: ID Name Description Type Base storage resource Source Original parent Health state Health details action is required." no}] [-fastvpPolicy {startHighThenAuto | auto | highest | lowest}] [-dataReduction {yes [-advancedDedup {yes | no}] | no}] 400 Manage Storage - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 401
data during data relocation operations. Valid values (case-insensitive): ● startHighThenAuto (default)-Sets the initial data placement to the highest-performing drives with available space, and then relocates portions of the storage resource's data based on I/O activity. ● auto-Sets the initial data - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 402
supported for LUNs in this consistency group. Valid values are: ● yes ● no (default) NOTE: Advanced deduplication is available only on: ● Dynamic or Traditional pools in Unity -snapHosts Host_1, Host_3, Host_18, Host 21 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 403
along with the LUN itself. Valid values are: ● yes ● no (default) Run the operation in asynchronous mode. Example The following command deletes LUN /stor/prov/luns/group -id res_1 delete Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 404
for hosting virtual machines (VM). You can provision and manage NFS datastores and view details about each NFS datastore on the system, such as their storage capacity and health. Each NFS datastore is identified by an ID. NOTE: You cannot create an NFS datastore on a NAS server that uses IP multi - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 405
8K) Thin provisioning enabled Identifies whether thin provisioning is enabled. Value is yes or no. Default is no. All storage pools support both standard and thin provisioned storage resources. For standard storage resources, the entire requested size is allocated from the pool when the resource is - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 406
have been created on Unity systems running version 4.2.x or later. Data Reduction ratio Ratio of the total storage used before data reduction supported on the resource. Valid values are: ● yes ● no (default) NOTE: Advanced deduplication is available only on: ● Dynamic or Traditional pools in Unity - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 407
:% where: ● is the name of the storage tier. ● is the percentage of storage in that tier. Local path Local path to be exported. Export path Export path to datastore. Default access Default share access settings for host configurations and for unconfigured - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 408
or remote). Valid values are: ● yes ● no Error Threshold Identifies the threshold of used space in the storage resource as a percentage. When exceeded, error alert messages will be generated. The default value is 95%. If the threshold value is set to 0, this alert is disabled. This option must be - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 409
pool that the NFS datastore will use. Type the quantity of storage to reserve for the NFS datastore. Type the typical write I/O size from the host to the NFS datastore. Valid values are: ● 8K (default) - General purpose 8K ● 16K- General purpose 16K ● 32K- General purpose 32K ● 64K- General purpose - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 410
Unity system running OE version 4.1.) Specify the minimum size to allocate for the thin NFS datastore. Automatic and manual file shrink operations cannot decrease the file system size lower than this value. The default of the storage resource's data based on the storage resource's performance - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 411
by default, all by default, all by default, all default) ● NFSv4 Type the default manually managed. If the passed hosts are all ESXi hosts, this value will be automatically configured to the NFS user configured on the ESXi host. NOTE: For NFSv3 or NFSv4 protocols configured without Kerberos, the default - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 412
VMs." ● Uses NAS server nas_1 as the primary NAS server. ● Uses the "capacity" storage pool. ● Primary storage size is 100 GB. ● Read-write access to host1 ● Minimum security level of krb5. ● An NFS owner "John" ● Default host access as N/A The file system receives the ID NFSDS_1: uemcli -d 10 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 413
a shrink estimate: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /stor/prov/vmware/nfs -id vmware_1 -shrinkToSize 200G show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = vmware_1 Name = MyVMware Description = My VMware Health state = OK (5) File - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 414
Unity system running OE version 4.1.) Specify the minimum size to allocate for the thin NFS datastore. Automatic and manual file shrink operations cannot decrease the file system size lower than this value. The default of the storage resource's data based on the storage resource's performance - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 415
Qualifier Description -defAccess Specify the default share access settings for host configurations and for unconfigured hosts who can reach the datastore. Valid values are: ● ro-Read-only access to primary storage and snapshots associated with the datastore ● root-Read/write root access to - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 416
alert messages will be generated. The range is from 0 to 99, and the default value is 75%. If the threshold value is set to 0, this alert is disabled "HOST_1,HOST_2, HOST_4, HOST_12" -naHosts "HOST_3" Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = NFSDS_1 Operation - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 417
be deleted. Valid values are: ● yes ● no (default) Run the operation in asynchronous mode. Example The following command insensitive): ● Primary ● Thin clone (tc when used with the -create command.) Base storage resource (Applies to thin clones only) ID of the base VMFS datastore for the thin - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 418
Thin provisioning enabled Identifies whether thin provisioning is enabled. Valid values are: ● yes ● no (default) All storage pools support both standard and thin provisioned storage resources. For standard storage resources, the entire requested size is allocated from the pool when the resource is - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 419
has been enabled. An empty value indicates that advanced deduplication is not supported on the storage resource. Valid values are: ● yes ● no (default) NOTE: Advanced deduplication is available only on: ● Dynamic or Traditional pools in Unity 380F, 480F, 680F, and 880F systems ● Dynamic pools in - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 420
data during data relocation operations. Valid values (case-insensitive): ● startHighThenAuto (default)-Sets the initial data placement to the highestperforming drives with available space, and then relocates portions of the storage resource's data based on I/O activity. ● auto-Sets the initial data - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 421
-sched parameter. Valid values are: ● yes ● no (Not applicable when creating a thin clone) Specify the default SP to which the VMware resource will belong. The storage system determines the default value. Valid values are: ● spa ● spb (Not applicable when creating a thin clone) Specifies whether the - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 422
(default) NOTE: Advanced deduplication is available only on: ● Dynamic or Traditional pools in Unity 380F, 480F, 680F, and 880F systems ● Dynamic pools in Unity All , and then relocates portions of the storage resource's data based on the storage resource's performance statistics such that data is - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 423
Example The following command creates a VMFS datastore with these settings: ● Name is Accounting3. ● Description is Accounting Group 3. ● Uses the capacity storage pool. ● Provides host access permissions to the VMFS datastore (presented as a LUN) to two of the IQNs for host configuration 1014 and - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 424
= Original parent = Health state = OK (5) Health details = "The component is operating normally. No action is required." Storage pool ID = pool_1 Storage pool = Pool 1 Size = 1099511627776 (1.0T) Maximum size = 70368744177664 (64.0T) Thin provisioning enabled = yes Data Reduction - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 425
description of the VMFS datastore. (Not applicable to thin clones) Type the quantity of storage to allocate for the VMFS datastore. Type the ID of a protection schedule to apply ● no (Not applicable to thin clones) Specify the default SP that owns the datastore. Valid values are: ● spa ● spb Manage - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 426
default) NOTE: Advanced deduplication is available only on: ● Dynamic or Traditional pools in Unity 380F, 480F, 680F, and 880F systems ● Dynamic pools in Unity setting, and then relocates portions of the storage resource's data based on the storage resource's performance statistics such that data is - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 427
10.0.0.1 -u Local/joe -p MyPassword456! /stor/prov/vmware/vmfs -id VMFS_1 set - vdiskHosts HOST_1, HOST_2, HOST_18, HOST_22 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = VMFS_1 Operation completed successfully. Delete VMware VMFS datastores Delete a VMFS datastore - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 428
can be deleted along with snapshots. Value is Yes or No (default). Example The following command deletes VMFS datastore VMFS_1: uemcli -d 10 . -force Unconditionally refreshes the VMFS resource, even if the storage resource has host access configured. Example The following command refreshes the - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 429
virtual volumes. NAS protocol endpoints are created and managed on the storage system and correspond to a specific NFS-based NAS server. It is the NAS server for File PEs. WWN The World Wide Name for Block PEs. Default SP Identifier for the preferred SP. Valid values are: ● SPA ● SPB Current - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 430
10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = rfc4122.60060160-ca30-3c00-962b-87806445241a Name = scsi_pe_1 Type = SCSI VMware UUID = rfc4122.60060160-ca30-3c00-962b-87806445241a Export path = IP address = WWN = 60:06:01:60:CA:30:3C:00:96:2B:87:80:64:45:24:1A Default SP - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 431
systems) when the vVol is being created based on these profiles. Only vVol datastores that support the storage policy profile are considered compatible storage containers for deploying the vVol. Table 119. vVol datastore attributes Attribute Description ID vVol datastore identifier. Name - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 432
error (30) - Resource unavailable due to one or more unavailable storage pools. Health details Detailed health state for the vVol datastore. Capability profile Comma-separated list of identifiers of capability profiles supported by the vVol datastore. Each identifier with a "(Not used)" suffix - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 433
vVol datastore. -cp Specify the list of identifiers of capability profiles supported by the vVol datastore. -size Specify the list of allocation sizes. size 10G,12G -type file -hosts "Host_1,Host_2" Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = res_1 Operation - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 434
= OK (5) Health details = "The component is operating normally. No action is required." Capability profile = cp_1, cp_2 (Not used) Storage pool = pool_1,pool_3 Total capacity = 128849018880 (120G) Total current allocation = 12884901888 (12G) Total used capacity = 1073741824 (1G) Hosts - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 435
capability profiles the vVol datastore will support. Type the list of identifiers of capability profiles already supported by the vVol datastore and specify descr "My new description" -addCp cp_1 -size 10G Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = res_1 Operation - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 436
10.0.0.1 -u Local/joe -p MyPassword456! /stor/prov/vmware/vvolds -id res_1 set -hosts Host_2, Host_3, Host_11, Host_14 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = res_1 Operation completed successfully. Delete vVol datastores Deletes specified vVol datastores and - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 437
-id -vvolds -pool -cp Description Type the allocation identifier of the vVol datastore. Type the ID of the vVol datastore. Type the ID of the storage pool. Type the ID of the capability profile. NOTE: To obtain the ID of the vVol datastore and it's associated pool and capability profile IDs - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 438
Additional health information for the virtual volume. Datastore Identifier of the datastore associated with the virtual volume. Storage pool Identifier of the storage pool that contains the virtual volume. Capability profile Identifier of the capability profile associated with the virtual - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 439
value is empty. Virtual machine Identifier of the virtual machine. VM hard disk Name of the associated VM hard disk. SP owner Name of the storage processor where the vVol is placed. Creation time Date and time the virtual volume was created. View vVol objects Display a list of existing vVol - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 440
. No action is required." Datastore = res_1 Storage pool = pool_1 Capability profile = cp_1 Policy must be exclusively confirmed by the user. The following confirmation message will display to delete the virtual volume? yes / no: The default in silent mode is yes. Format /stor/prov/vmware/ - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 441
Storage system port: 443 HTTPS connection Operation completed successfully. Create vVol snapshots Learn how to create native snapshots of a VMDK (data) vVol object. Create snapshots of a VMDK, or data, virtual volume. NOTE: A vVol snapshot created in Unity with the default naming convention - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 442
createSnap -snapName backup-snap Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection vSphere, but a vVol snapshot created with VASAconnected vSphere can be restored with either Unity or vSphere. Format /stor/prov/vmware/vvol {-id | -name - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 443
tiered pool with NL-SAS Service level-based provisioning (virtual deployments) Expected service level for a virtual pool support a particular application. The virtualization administrator and storage administrator should collaborate to define these usage tags. Storage properties Supported storage - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 444
profile description. VMware UUID of the capability profile. Associated storage pool identifier. Service level of the underlying storage pool. Valid values are: ● Platinum ● Gold ● Silver ● Bronze Comma-separated list of user-defined tags. Each tag is an alphanumeric string value. Specifies - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 445
digits. -descr Type a description for the capability profile. -pool Specify the identifier of the storage pool the capability profile is based on. -usageTag Type a comma-separated list of user-specified usage tags. Each tag is an alphanumeric string value. Example The following command creates - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 446
system port: 443 HTTPS connection ID = cp_1 Name = CapabilityProfile1 Description = VMware UUID = 550e8400-e29b-41d4-a716-446655440000 Storage pool = pool_1 Service level = Gold Usage tag = Exchange, OLTP Drive type = ExtremeMultiTier RAID level = Mixed FAST Cache = Off FAST VP - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 447
tag is an alphanumeric string value. -removeUsageTag Comma-separated list of user-specified usage tags to be removed from the specified capability profile. Each config/cp -id cp_1 set -name "CapabilityProfile2" Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = cp_1 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 448
limit is shared, that is, whether settings are enforced on the sum of all the storage resources that have this policy or on each individual storage resource. Values are one of the following: ● yes ● no (default) Paused Whether the defined I/O limit policy is paused. Values are one of the following - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 449
is applied initially or changed, the burst frequency interval begins and the storage that is associated with the policy will burst immediately, regardless of when be created. Values are one of the following: ● absolute (default) ● density -maxIOPS Specify the maximum IOPS. Cannot be specified - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 450
/config/iolimit create -name "finance" -descr "for finance department" -shared yes -type absolute -maxIOPS 500 -maxKBPS 1000 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = IOL_1 Operation completed successfully. Example 2 The following command creates an I/O limit - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 451
. uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /stor/config/iolimit create -name "HR3" -type density -maxIOPS 2000 -maxKBPS 3000 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation failed. Error code: 0x900912a Mismatch between policy type and limit values - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 452
error is given. Otherwise the I/O limit policy is removed from all storage resources and/or snapshots before it gets deleted. Example The following resumed. Values are one of the following: ● yes ● no (default) Specify whether and absolute or density-based policy will be created. Values are one - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 453
10.0.0.1 -u Local/joe -p MyPassword456! /stor/config/iolimit -id IOL_1 set -name "engineering" -maxIOPS 1000 -noKBPS Storage system address: 10.64.75.201 Storage system port: 443 HTTPS connection Operation completed successfully. Example 2 The following command pauses I/O limit policy IOL_1: uemcli - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 454
about all I/O limit policies on the system: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /stor/config/iolimit show -detail Storage system address: 10.64.75.201 Storage system port: 443 HTTPS connection 1: ID Name Description Shared Paused Type Maximum IOPS Maximum KBPS Maximum IOPS - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 455
policy allows you to limit throughput and bandwidth, providing for more predictable performance in system workloads, that is, between hosts and applications and storage resources. An I/O limit policy can be applied to an individual LUN or to a group of LUNs. Only one I/O limit policy can be applied - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 456
no. Example The following command enforces the use of I/O limits on the system: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /stor/config/iolimit/config set -paused no Storage system address: 10.64.75.201 Storage system port: 443 HTTPS connection Operation completed successfully. 456 Manage - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 457
CHAP accounts • Manage Data at Rest Encryption (physical deployments only) • Manage KMIP support (physical deployments only) Manage snapshots A snapshot is a virtual point-in-time image of the data within a storage resource that has changed since the last snapshot. Snapshots provide a record of - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 458
deleted from the system. Default is 7 days. user, protection schedule, or backup process that created the snapshot. Valid values are: ● For manual snapshots created by a user, the user Snapshot Service ( user access. Comma-separated IO limit policy IDs for the attached snapshots of block-based storage - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 459
delete on the destination. Valid values are: ● yes ● no Default value is no. Clone count Indicates the number of thin clones associated system where the snapshot originates from. Create snapshots Create a snapshot of a storage resource. NOTE: Snapshots of LUNs are not intended for use as mirrors, - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 460
file systems. View consistency groups explains how to view the settings for iSCSI storage resources Specify the amount of time to retain a snapshot before it expires. delete the snapshot or snapshot set. Valid values are: ● yes (default) ● no -access Specify whether the snapshot is a read-only - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 461
user snapshot is replicated. You must specify this qualifier when there are multiple replication sessions of a source resource that supports on the system. You can filter on the snapshot ID, snapshot name, or storage resource ID. NOTE: The show action command explains how to change the output format - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 462
displays details about all snapshots on the system: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /prot/snap show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = 171798691871 Name = snap_test2 State = Ready Attached = no Source = res_3 Source - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 463
If this switch is not specified, no copy is created. -type -roHosts -rwHosts -force Attachment type. Valid values are (case insensitive): ● default (default)-Allows promoting only one snapshot of the parent storage resource at a time. ● dynamic-Allows promoting several snapshots of the same parent - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 464
command refreshes a snapshot: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /prot/snap -id 38654705680 refresh - copyName copy1 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = 38654705680 Operation completed successfully Replicate snapshots NOTE: Use to replicate - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 465
Identifies the remote system which the user snap will be replicated to. This multiple replication sessions of the source resource that supports Async Snap Replication. -keepSameAsSource Indicates whether or not replicate -keepRemotelyFor 1d Storage system address: 10.0.0.1 Storage system port: 443 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 466
state, if necessary. Prerequisites ● To prevent data loss, ensure that all hosts have completed all read and write operations to the storage resource you want to restore. ● For LUN storage: ○ If the snapshot is attached, you must first detach it or an error will appear when you attempt to restore to - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 467
as the initial step of the restoration process. The system assigns a name to this snapshot if the user does not provide one. Example The following command restores snapshot SNAP_1, which is a snapshot of iSCSI storage: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /prot/snap -id SNAP_1 restore - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 468
The following command deletes snapshot SNAP_1: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /prot/snap -id SNAP_1 delete Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Copy snapshots Copy a snapshot. Format /prot/snap { -id - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 469
snapshot receives ID SNAP_1: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /prot/snap -id SNAP_1 copy -copyName SNAP_Copy Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = SNAP_1 Operation completed successfully. Modify snapshots Change the settings of a snapshot - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 470
! /prot/snap -id SNAP_1 set -newName MySnap Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = SNAP_1 Operation path to be exported. Export path Export path to the share. Default access Specifies the default access level. Valid values are: ● ro-Read-only access ● - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 471
specified in the hosts lists are defined using /remote/host objects, such as with their identifier. Valid values (case insensitive) are: ● yes (default) ● no Read-only hosts Comma-separated list of identifiers of hosts allowed reading data. Read/write hosts Comma-separated list of identifiers of - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 472
the share. -snap Type the snapshot to associate the share with. -path Type the path at which to mount the file system. Default value is /. -defAccess Specifies the default access level of the share. Valid values are: ● ro-Read-only access ● rw-Read/Write access ● roroot-Read-only Root access - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 473
address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = nfs_2 Name = Share_2012-08-24 16:05_00 Description = Snapshot = app_1_sg_1 Local path = /fs_1_wckpapp/group.app_1_sg_1.fs.fs_1_wckp Export path = 10.0.0.1:/Share_2012-08-24 16:05_00 Default access = na Advanced - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 474
. Action qualifier Qualifier Description -async Run the operation in asynchronous mode. -descr Type the description of the share. -defAccess Specifies the new user description of the share. Valid values are: ● ro-Read-only access ● rw-Read/write access ● roRoot-Read-only Root access ● root - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 475
on a NAS server, this is the default value. ● krb5-Kerberos v5 authentication. This is the default value when secure NFS is configured on the you delete a snapshot share, you can no longer recover data from it or restore a storage resource to it. Format /prot/snap/nfs {-id | -name } - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 476
MyPassword456! /prot/snap/nfs -id nfs_1 delete Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed on a share to include only those that the requesting user has access to. ● no (default) DFS enabled Indicates whether Distributed File System (DFS) is - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 477
- Prevents clients from storing documents and programs in offline cache (default) ● documents - All files that clients open will be available preferably open from offline cache, even when connected to the network. ● manual - Only specified files will be available offline. Create a CIFS snapshot - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 478
system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = cifs_2 Name = Share_2012-08-24 16:05_00 Description = Snapshot = app_1_sg_1 Local path = /group.app_1_sg_1.fs.fs_1_wckp Export path = 10.64.76.120:/Share_2012-08-24 16:05_00 Default access = na No access - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 479
will open from offline cache, even when connected to the network. ● manual-Allows only specified files to be available offline. Example uemcli /prot/snap/cifs -id cifs_1 set -descr "My share" Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = cifs_1 Operation completed - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 480
identified by an ID. The Unisphere online help provides more details about storage replication. It is important to note that when replicating from a Unity system running a later OE version (for example, OE 4.1.x) to a Unity system running an earlier version (for example, OE 4.0.x), you cannot have - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 481
may negatively impact performance. The default RPO is one hour. RPO the session is in an Idle state. ○ manual-User initiated syncing. ○ auto syncing-System initiated storage resource is now in a read/write state. Review the state of the source and check your network connections for any problems - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 482
the replication session. If the problem persists, delete and then create the ● Failed Over with Sync (0x8400) ● Failed Over (0x8401) ● Manual Syncing (0x8402) ● Paused (0x8403) ● Idle (0x8404) ● Auto to be failed over. Status of the destination storage resource in the session. Valid values are: - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 483
the replication. Source SP B interface ID of the interface on the SPB of the source system for the replication. Destination resource ID of the storage resource on which the data is replicated. Destination SP A interface ID of the interface on the SPA of the destination system for the replication - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 484
Table 130. Replication session attributes (continued) Attribute Description NOTE: For synchronous replication, the percentage is reported when the replication is in the Syncing state. Sync transfer rate Synchronization transfer rate when the session is in the syncing state. For multi-LUN - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 485
version 5.0 without any snapshot replication. Prerequisites Before creating a replication session, complete the following configuration tasks: ● Create the storage resource that provides the replication source. ● For local replication, create a replication destination on a local system. ● For remote - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 486
a copy of changes, is retained. ● remote-Maintain a full copy of the storage resource on a remote system by transferring the data over the network. Remote replication is wanted Recovery Point Objective (RPO). ● manual-Data is only be replicated when manually initiated. NOTE: This qualifier is used - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 487
that point forward for newly created scheduled snapshots, old snapshots are left as is). No values are allowed. This option is enabled by default if -keepFor or -allowAutoDelete are not set. NOTE: This qualifier is used for asynchronous replications only. Specifies the retention time after which the - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 488
session is configured if you want to avoid a full copy after a failover. Indicate whether you want to skip the user snap signature check when using the user snapshot as the common base for Unity systems running OE version 5.1. This qualifier is valid only when specifying the source and destination - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 489
-p MyPassword456! /prot/rep/session show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = 81604378625_FCNCH097274B3A_0000_81604378627_FCNCH097274B37_0000 Name = MyRep1 Session type = block Synchronization type = manual RPO = Sync State = idle Health - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 490
/prot/rep/session show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = 42949672965_FCNCH0972DDD67_0000_42949672967_FCNCH0972DDD67_0000 Name = rep_sess_sv_1_sv_2_local Session type = lun Synchronization type = manual RPO = Resource type = LUN - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 491
the wanted Recovery Point Objective (RPO). ● manual-Data only is replicated when manually initiated. NOTE: This qualifier is used for asynchronous but also increases network traffic and may negatively impact performance. The default RPO is one hour. For automatic synchronization, type the time - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 492
when the session is active. Valid values are: ● yes ● no (default) Example The following command changes the source interface and destination interface for replication session if_2 -dstSPAInterface if_3 -dstSPBInterface if_4 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 493
replication session 81604378625_FCNCH097274B3A_0000_81604378627_FCNCH097274B37_0000: uemcli /prot/rep/session -id 81604378625_FCNCH097274B3A_0000_81604378627_FCNCH097274B37_0000 pause Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Resume - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 494
Beginning with Unity 5.1.2, common base snapshots have signatures that allow delta synchronization to occur. NOTE: This qualifier does not support synchronous block id 81604378625_FCNCH097274B3A_0000_81604378627_FCNCH097274B37_0000 resume Storage system address: 10.0.0.1 Storage system port: - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 495
session from the source system automatically removes the destination and source replication sessions. This ensures that you do not have to manually delete the associated storage resources or NAS servers from the destination system. NOTE: Once you delete a replication session, data from the source - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 496
session from the source system, the destination system is fully synchronized with the source to ensure that there is no data loss. The destination storage resource can be used for providing access to the host. Format /prot/rep/session {-id | -name } failover [-async] [-sync {yes | no - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 497
from the destination system. Where -sync is not specified, this is the default value for a remote replication session or session where role=destination. NOTE: If destination and source storage resources ● Makes the destination storage resource read-only ● Makes the source storage resource read/write - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 498
Beginning with Unity 5.1.2, common base snapshots have signatures that allow delta synchronizations to occur. NOTE: This qualifier does not support synchronous block -id 81604378625_FCNCH097274B3A_0000_81604378627_FCNCH097274B37_0000 failback Storage system address: 10.0.0.1 Storage system port: 443 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 499
uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /prot/rep/session -id 81604378625_FCNCH097274B3A_0000_81604378627_FCNCH097274B37_0000 preserveAsync Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Re-create a replication session You can - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 500
● remote-Maintain a full copy of the storage resource on a remote system by transferring the RPO). ● manual-Data is replicated when manually initiated. may negatively impact performance. The default RPO is one hour. Type the user snapshot was designated as the common base snapshot for Unity systems - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 501
(CHAP). Two type of CHAP are supported: ● Incoming Forward CHAP - This is used by the storage system to authenticate the RPA. This CHAP CHAP user name. The outgoing CHAP secret (password). The outgoing CHAP secret input format. Valid values are: ● ascii - Secret in the ASCII format (default). ● - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 502
Type the outgoing CHAP user name. -outSecret Type the outgoing CHAP secret (password). By default, the CHAP secret is set -outUsername admin -outSecret abcdef123456 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation the feature is not installed. 502 Protect Data - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 503
attributes (continued) Attribute Description Percent encrypted Percent of user data encrypted. Backup keystore status Status of the the storage system. NOTE: This attribute is not applicable, and is blank, when the license for the feature is not installed. KMIP status Status of KMIP support. - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 504
port: 443 HTTPS connection Operation completed successfully. Manage KMIP support (physical deployments only) KMIP server configuration of the storage system. Table 133. KMIP attributes Attribute ID Username Password Port Timeout Address Description KMIP server identifier. Username for accessing - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 505
to access the KMIP server. -passwdSecure Specify the password in secure mode - the user will be prompted to input the password and the password confirmation. -port Specify the port number used by the KMIP server for KMIP communications. Default value is 5696. -timeout Specify the timeout for - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 506
Qualifier -addr Description Specify a list of KMIP server addresses to designate as default addresses. Separate the addresses with a comma. Both IP addresses and FQDN host names are supported. The system uses the addresses in the order in which they are typed. NOTE: Each Key Manager server vendor - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 507
is used to import data from a VNX1 or VNX2 storage system (source) to a remote Unity storage system (target). Two types of VNX imports are online help provides more details about storage import. NOTE: At any given point in time, only one command is supported on an import session. Before running - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 508
Cutting over ● Incremental copy ● Ready to commit ● Committing ● Completed ● Cancelling ● Cancelled ● Pending ● Syncing Progress Import session progress. Only supported for NAS import. Source system Remote system identifier for source system. Source resource Source resource identifier. Target - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 509
import sessions on the system: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /import/session show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = import_1 Name = import_sess_vdm1_BB0050562C7D2A_FCNCH0972C330D Session type = nas Health state - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 510
LUNs or LUN Groups are imported from a VNX1/VNX2 storage system (source) to a remote Unity storage system (target). Block VNX import makes use of the provides more details about import of block storage. NOTE: At any given point in time, only one command is supported on a block import session. Before - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 511
for the current import stage. bytes Only supported for block import. Percent remaining for import Specifies and target for data transfer. ● Create an import connection to a Unity-based target system. ● Create a block import target (LUN or storage systems. Valid values are: ● yes ● no Data - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 512
Qualifier Description NOTE: Default is to throttle the import transfer, which means that it is LUN pool pairs. A comma separated list of mappings between the source LUN and the target storage configuration. NOTE: Use the format srcLUN1:tgtPool1,...,.... Target LUNs will have the same properties as - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 513
that are in use on the source and target storage systems. Valid values are: ● yes ● no NOTE: Default is to throttle the import transfer, which means recommended that the cutover threshold be set to a value smaller than the default value of 5 percent. Lastly, cut over an import session only when the - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 514
over to the target system: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /import/session/block -id import_1 cutover Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Cancel a block import session Cancel an existing block import session - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 515
process in which a VDM on a VNX1 or VNX2 storage system (source) is imported to a remote Unity storage system (target). The file systems (common log or more details about import of VDM file storage. NOTE: At any given point in time, only one command is supported on a file import session. Before - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 516
Table 137. File import session attributes (continued) Attribute Description ● OK (5)-Session is operating normally. ● OK BUT (7)-Session is in one of the following states: ○ Session is initialized but paused. ○ Session is paused to migrate data in initial copy. ○ Session is paused to sync data in - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 517
default production port Target production port identifier. The default User name for authentication to Windows domain. CIFS domain password Password for authentication to Windows domain. CIFS local administrator User from the source VNX to the current Unity-based target system. ● Create a target - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 518
remote) system. Specifies the source resource. Specifies the default storage pool to store target NAS server configuration information and sourceFsId2~sourceFsId3:destination_pool_friendlyId (sourceFsId2 and sourceFsId3 must be existing supported source file system IDs, the other file system IDs - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 519
password for authentication to the DHSM service on the source Data Mover. Specifies the password for authentication to the DHSM service on the source Data Mover in secure mode. NOTE: The user will be prompted to input the password and the password must be existing supported source file system IDs - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 520
sourceFsId3 must be existing supported source file system IDs. parameters between VNX and Unity. When import session is newName. ● Source storage system is RS_1. ● Source storage resource (VDM) is src_vdm_to_migrate ● Migrate the direct match UNIX Directory Service. ● File systems 13, 20 through - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 521
is spa_iom_0_eth0. ● Migrate the direct match UNIX Directory Service. ● File systems 13, 20 through 25, and is newName. ● Source storage system is RS_1. ● Source storage resource (VDM) is src_vdm_to_migrate on the source VDM is cifsadmin1 ● The password for authentication to the CIFS server on the - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 522
target VLAN pairs. Applicable only when the session status is Initialized or the target production interface creation fails. Specifies the user name for authentication to the CIFS server on the source VDM. Specifies the password for authentication to the CIFS server on the source VDM. Specifies the - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 523
Description NOTE: The user is prompted to input the password and the password confirmation. -srcFsImportedAsVMWareDatastore Specifies /import/session/nas -id import_1 set -paused no Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 524
network. NOTE: If not specified, the default name for renaming the source CIFS server user password. -domainPasswdSecure Specifies the password in secure mode. NOTE: The user is prompted to input the password and the password id import_1 cutover Storage system address: 10.0.0.1 Storage system port: - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 525
while specifying the AD organizational unit tree: uemcli -u admin -p -sslPolicy accept /import/session/nas -id import_1 cutover -netbiosName ! /import/session/nas -id import_1 commit Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 526
password in secure mode (not necessary for standalone CIFS server). NOTE: The user is prompted to input the password and the password import/session/nas -id import_1 cancel -skipSourceRestore Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 527
-p MyPassword456! /import/session/nas show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID import interface = if_5 Target default production port = spa_iom_0_eth0 Target if_6:0 CIFS local user = Administrator Source DHSM user = 2: ID Type - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 528
1400:UNIX; 174:WINDOWS Target import interface = if_5 Target default production port = spa_iom_0_eth0 Target production interface to port mapping = interface to vlan mapping = if_7:0 CIFS local user = Administrator Source DHSM user = View import session elements View details about - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 529
which provides a Fibre Channel (FC) or iSCSI interface to its block devices (LUNs). It uses the SAN Copy Pull feature running on the local storage system. If the iSCSI protocol is used, iSCSI connections and connection paths must have been created and configured before you can manage generic import - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 530
Cancelled SP owner Default destination LUN SP owner the user when manually to the Dell EMC Unity system form, such as 60:00:01:6F.. Target resource Target resource name Target resource type CLI ID of the destination storage resource. Name of the destination storage - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 531
the longer the import will take. Valid values are: ● Low ● Medium ● High (default) Create a generic import session Create an import session for third-party systems. Format /import/ , you can convert the WWN manually to the Dell EMC Unity system form, such as 60:00:01:6F.. Data Mobility 531 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 532
storage resource. -targetResName Name of the destination storage resource. -throttle Specifies the import session throttle value. Valid values are: ● Low ● Medium ● High (default import session. Third-party system name provided by the user at import session creation. Show only active sessions (all - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 533
all import sessions on the system: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /import/session/generic show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = gen_import_1 Name = Session_for1527875375 Description = Health state = OK (5) Health - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 534
for name to newName: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /import/session/generic -id gen_import_1 set -name newName Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Pause a generic import session Pauses a running third-party - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 535
the "gen_import_1" import session: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /import/session/generic -id gen_import_1 pause Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Resume a generic import session Resumes running a third - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 536
the "gen_import_1" import session: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /import/session/generic -id gen_import_1 cancel Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Restart a generic import session Restarts a failed third - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 537
gen_import_1" import session: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /import/session/generic -id gen_import_1 restart Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Delete a generic import session Deletes a specified cancelled - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 538
that were created according to an established schedule. Common base snapshots can also be manually created snapshots of both the source and destination systems. NOTE: The precheck can only show -detail [Response] Storage system address: 10.64.75.201 Storage system port: 443 HTTPS connection - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 539
move session. Source resource Storage resource for the source. Source member LUN Source member LUN, if the storage resource is a LUN group The move session encountered an internal error. Please contact your service provider. Health details Additional health information. See Appendix A, - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 540
move sessions that are appropriate for most use cases. This is the default value. ● Above normal-Designated for move sessions that are slightly more member of a Consistency Group. -targetPool Identifier of the destination storage pool where the moved resources will be created. -priority Priority - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 541
applies when data reduction is enabled. Valid values are: ● yes ● no (default) -async Run the operation in asynchronous mode. Example 1 The following command thin yes -dataReductionEnabled yes -advancedDedupEnabled yes Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 542
over other move sessions. ● below-Designated for move sessions that are slightly less critical than the average or normal move session. ● normal (default)-Designated for move sessions that are appropriate for most use cases. ● above-Designated for move sessions that are slightly more critical than - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 543
settings of a move session. uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /move/session -id MoveSession_1 set -priority below Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = MoveSession_1 Operation completed successfully. Delete a LUN move session Deletes a LUN - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 544
in asynchronous mode. Example The following command cancels a move session. uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /move/session -id movesession_1 cancel Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. 544 Data Mobility - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 545
variety of system events. It collects the events and writes them to the user log. The log contains a record for each event. Some log entries generate alerts a system problem. For example, you might receive an alert telling you that a drive has faulted, or that the system is low on storage capacity. - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 546
service personnel. Table 142. Alert attributes Attribute ID Time Message ID Message Description Severity Acknowledged State Duplications Description ID of the alert. Date and time (in GMT) when the alert occurred. Alert message ID. Alert message. Description of a problem be manually cleared using - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 547
number of records to display. The value cannot exceed the default number 100. Type the minimum severity level of the events to :59:59.999" Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: Message ID = 14:70001 Description = User admin authenticated in authority - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 548
Type the maximum number of records to display. The value cannot exceed the default number 100. -acknowledged Type to specify a list of alerts that have or = error Acknowledged = no State = Active_Manual(unsolved and need manually marked as inactive after been solved) Duplications = 0 2: ID - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 549
alert_3. uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /event/alert/hist -id alert_3 delete Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Deactivate alerts Manually deactive an alert that is in the Active_Manual state after it has - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 550
joe -p MyPassword456! /event/alert/hist -id alert_1 deactivate Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection You should only deactivate an are notifications of system and user events. You can have the alerts sent directly to your service provider and e-mailed to specific - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 551
handles alerts. Format /event/alert/conf show Example uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /event/alert/conf show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: Language = en-US SNMP severity threshold = Info SNMP version = 3.0 SNMP engine ID - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 552
suppress call home alerts when you are intentionally performing service actions on your system. -stopCallHomeSuppression Specify to disable -emailFromAddr "[email protected]" -snmpSeverity error Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 553
that will trigger emails. Valid values are: ● critical ● error ● warning ● notice (default) ● info Example This example shows the configuration of the "to" email address of " create -addr [email protected] -severity info Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 554
/joe -p MyPassword456! /event/alert/conf/emailto -addr [email protected] set -newAddr [email protected] -severity info Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = alertEmailConfig_1 Operation completed successfully. View alert email settings View the "email to - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 555
the alert emails on the system. uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /event/alert/conf/emailto show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID Address Severity threshold = alertEmailConfig_1 = [email protected] = Info 2: ID Address Severity - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 556
delete Storage system address: 10.0.0.1 Storage system problem has occurred or may occur. ● Errors - Report system problems that address of the SNMP destination. Port User name Host port on the SNMP - Secure Hash Algorithm Auth password Authentication password for accessing the SNMP destination - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 557
the privacy password. -privPasswordSecure Specify the password in secure mode. The user will be prompted to input the password. -v2c authPassword authpassword1234 -privProto des - privPassword privpassword321 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Manage Events - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 558
uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /event/alert/snmp show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = snmp_target_1 Version = v3 Host = 10.0.1.3 Port = 123 User name = v3User Auth protocol = None Privacy protocol = None Community - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 559
● md5 - Message-Digest algorithm 5 ● sha - Secure Hash Algorithm -authPassword Type the authentication password. -authPasswordSecure Specify the password in secure mode. The user will be prompted to input the password. -privProto Specify the protocol that is used to enable privacy on the SNMP - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 560
. Example The following command deletes SNMP destination Host1_323: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /event/alert/snmp -id Host1_323 delete Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. 560 Manage Events and Alerts - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 561
System Topics: • Change the service password • Service the system • Manage core dump files • Manage Service Information • Manage SSH access • Service the storage processor (SP) Change the service password The system ships with a default service password for performing service actions on the system - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 562
uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /service/user set -passwd NewPassword456! -oldpasswd OldPassword456! Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Service the system Apply service action to the system. This command must - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 563
should be in the service mode to execute this action. Format /service/system reinit Example The following command reinitializes the storage system: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /service/system reinit Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 564
! /service/system collect -serviceInfo -type perfAssessment Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Manage core dump files Manage the list of core dump files, which contain system information used by support for troubleshooting - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 565
command deletes a core dump by specifying its name. uemcli -d 10.0.0.1 -u local/serviceuser -p Password /service/system/dump -id mspa:CP_:2016-06-22_15_13_20_19151_ECOM delete Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Manage - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 566
. The following are the password requirements. Value is one of the following: ● yes ● no Example The following command enables SSH access to the system: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /service/ssh set -enabled yes Storage system address: 10.0.0.1 Storage system port: 443 HTTPS - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 567
: 443 HTTPS connection 1: SSH enabled = yes Service the storage processor (SP) Allows user to apply service action to the storage processor. This command must be executed with service user credentials. Enter service mode Switch the storage processor to the service mode.This command can only be - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 568
-id reimage Object qualifier Qualifier -id Description Identifies the storage processor. Example uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /service/sp -id spa reimage Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. 568 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 569
• Manage historical metrics values • Manage real-time metrics values Manage metrics service Storage system metrics gather information about system performance and storage usage, and collect that information for user review. Analyzing the system metrics can help predict the future growth of the - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 570
Local/joe -p MyPassword456! /metrics/service set -historyEnabled yes Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection metrics settings Storage system metrics gather information about system performance and storage usage, and collect that information for user review. - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 571
and real-time collection. This attribute does not apply to family, set, and compound metrics. View metrics settings View information about supported metrics. NOTE: Use the show action command to change the output format. Format /metrics/metric [-path ] [-availability { historical | real - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 572
displays all metrics. Example 1 The following command displays all available metric service settings for the system: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /metrics/metric show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: Path = sp.*.cifs.global.basic - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 573
service settings for the metrics with the specified paths: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /metrics/metric -path sp.*.storage.lun.*.avgReadSize,sp.*.storage Storage system metrics gather information about system performance and storage usage, and collect that information for user - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 574
of metric paths. NOTE: When typing metric paths, replace . with \., , with \, and \ with \\ in the object names. -interval Specify an interval for the metric values. Default interval is seconds. -from Specify the start of the query period. The format is: YYYY-MM-DD HH:MM:SS or YYYY-MM-DDTHH:MM - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 575
Qualifier -count -flat -summary Description Specify the number of samples to display. A sample is a set of metric values related to a single timestamp. Valid values are numbers greater than or equal to one. Displays the member values for grouped metrics. Displays the maximum, minimum, and average - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 576
system address: 10.0.0.1 Storage system port: 443 HTTPS connection Timestamp |SP |LUN |Read | | |Counts/s 2014-06-24 02:12:00 |spa |sv_1 | 4.001 2014-06-24 02:13:00 |spa |sv_1 | 2.400 2014-06-24 02:14:00 |spa |sv_1 | 9.602 Example 2 The following command displays the specified - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 577
pool.*.lun.*.dataSizeAllocated show -interval 60 -from "2014-06-24 03:04:00" -to "2014-06-24 03:06:00" Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Timestamp |SP |Pool Statistics |LUN |Data Size Allocated Bytes 2014-06-24 03:04:00 |spa |pool_1 |sv_1 |6442450944 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 578
|spb | 39.22 Maximum |spa | 17.72 |spb | 43.52 Manage real-time metrics values Storage system metrics gather information about system performance and storage usage, and collect that information for user review. Analyzing the system metrics can help predict the future growth of the system. The - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 579
- Hour ● MM - Minute ● SS - Second Identifies the object name or metric value. View real-time metrics settings View real-time metrics settings. The default output appears in a tabular format. NOTE: Use the show action command to change the output format. Format /metrics/value/rt -path show - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 580
metric every 10 seconds: uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! uemcli /metrics/value/rt -path sp.*.storage.lun.*.readsRate show -interval 10 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Timestamp |SP |LUN |Read | | |Counts/s 2014-06-24 03:26:10 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 581
Client = sv_1 CIFS Read = 0.200 3: Timestamp = 2014-06-24 03:26:20 SP = spb Client = sv_2 CIFS Read = 0.100 4: Timestamp = 2014-06-24 03:26:30 SP = spb Client = sv_2 CIFS Read = 0.200 Manage Metrics 581 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 582
is not installed. ● No other pools have been created. ● For virtual deployments, all virtual disks have been assigned a tier type. Retrieve default pools configuration uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /store/config/auto show Storage system address: 10.0.0.1 Storage system port - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 583
RAID level = Stripe length = Initiate auto configuration uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /stor/config/auto set Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection All disks in the system will be used to configure pools. Do you want to proceed? yes / no: - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 584
applies to hybrid Flash arrays, which only support traditional pools. Retrieve the list of storage profiles uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /stor/config/profile -configurable show Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = profile_22 - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 585
Storage system port: 443 HTTPS connection ID = GP_4 Operation completed successfully. Configure a dynamic pool You can configure dynamic pools for all-Flash models of Unity running OE version 4.2.x or later. New pools created for these models are dynamic pools by default size = 400.0G Rotational - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 586
pools for all-Flash models of Unity running OE version 4.2.x and later by explicitly setting the Type attribute to traditional. If you do not set Type to traditional when you create a pool in the Unisphere CLI, a dynamic pool is created. Step 1: View the list of storage profiles View the list of - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 587
-u Local/joe -p MyPassword456! /stor/config/pool create -name test -diskGroup dg_34 -drivesNumber 9 -storProfile tprofile_2 -type traditional Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = pool_6 Operation completed successfully. Add drives to an existing pool - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 588
= spa Storage pool = pool_0 Tenant = Interface = NFS enabled = yes NFSv4 enabled = no CIFS enabled = no Workgroup = Windows domain = Organization unit = Multiprotocol sharing enabled = yes Unix directory service = ldap Default Unix username = fred2 Default Windows username - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 589
are required. Please ensure configuration of Unix directory service. Please ensure configuration of CIFS server." Configure LDAP ldaps Verify certificate = yes Authentication type = simple Bind DN = cn=administrator,cn=User,dc=emc,dc=com Use CIFS account = Principal = Realm = Base DN = - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 590
1: ID = nas_1 Name = auto_mig_vdm_6380 SP = spa Storage pool = pool_24 Tenant = Interface = if_24 CIFS enabled = yes Multiprotocol sharing enabled = no Unix directory service = none Default Unix username = Default Windows username = Username translation = Health state = OK - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 591
-dryRun Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection Operation completed successfully. Retrieve the user mapping located by default uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/nas/server -id nas_1 show Storage system address: 10.0.0.1 Storage system port: - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 592
of the appropriate pool on the identified SP uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /stor/config/pool show -detail Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection 1: ID = pool_1 Name = TestPool Description = Total space = 6266625720320 (5.6T) Current - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 593
server on the same pool, use the CLI to configure local replication. The Unisphere GUI does not allow local replication between storage resources and NAS servers on the same pool. Configure asynchronous replication Prerequisites If you are configuring asynchronous replication for a tenant, create - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 594
sessions manually. 4. Create a remote replication session for the storage resource. spa_fc4 For more information, see the Unisphere CLI User Guide. 2. Zone the Synchronous Replication FC ports between you want: ● For synchronous replication support (Synchronous connection mode), use the Synchronous - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 595
Unity system and the VNX system. Mobility interfaces are not used for block import sessions. Ensure the following: ● The interface port is cabled and connected to a network switch. ● Both SPs are up and running. Obtain the following information for each Storage switch port to support VLAN tagging of - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 596
address and associated user authentication credentials to connect to the remote system. ● For local replication, the password associated with your user account. ● admin2 -dstPassword Password986! -connectionType async Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 597
Address = 10.1.1.1 Model = Unity 300 Serial number = FCNCH01234567A90 Connection storage resource that will act as the destination. ● Determine the replication synchronization mode you want. You can specify asynchronous (async), synchronous (sync), or manual synchronization (manual - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 598
asynchronous replication session cannot be created. About this task Configure an asynchronous replication session between the NAS servers associated with the file storage, with an RPO set to 2 hours 30 minutes and automatic synchronization. On the source system, the file system "res_7" is associated - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 599
/rep/session create -name MyFSRep1 -srcRes res_1 -dstType remote -dstSys RS_1 -dstRes res_1 Storage system address: 10.0.0.1 Storage system port: 443 HTTPS connection ID = 171798691844_FCNCH097274999_0000_171798691844_FCNCH0972749A9_0000 Operation completed successfully. View replication sessions - Dell Unity 650F | Unity™ Family Unisphere® Command - Page 600
to the online help or support page that provides steps to resolve a problem. A component may have multiple description strings indicating the health of the relevant subcomponents. For example: Health details = "The storage resource has failed because it uses a storage pool that includes one or more
Dell Unity™ Family Unisphere® Command
Line Interface User Guide
Version 5.x
Part Number: 302-002-578
April 2022
Rev. 10