Dell VNX8000 Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix
Dell VNX8000 Manual
View all Dell VNX8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell VNX8000 manual content summary:
- Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 1
Dell EMC Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix November 2021 REV 28 Copyright © 2021 Dell Inc. or its subsidiaries. All rights reserved. Published November USA. For the most up-to-date regulatory document for your product line, go to Dell EMC Online Support (https://support.emc.com). - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 2
EHC on VxRail ESSM for remote end point and EHC running on a VxRail Please check addendum versions of RCM as well for supported array versions listed below vSphere 6.5 Support is added in Appendix 6 Vendor Storage Arrays Dell EMC Dell EMC Dell EMC Dell EMC Product Versions EMC VMAX 40K, VMAX - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 3
(Source & Target=XtremIO) Switches: All FC SAN switches (2 Gb/s or greater) from EMC Connectrix®, Brocade, Cisco, QLogic for host and storage connectivity are supported. Refer to the Switched Fabric Topology Parameters table located on the E-Lab Navigator (ELN) at https://elabnavigator.emc.com for - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 4
5224934 | | All other platforms Older versions of ESXi that form part of the RCMs range listed in this ESSM are also supported. Build 5326177 | Installer build vSphere management server Build 5326177 | Installer build vSphere management server Build 5343628 | VMware Virtual Networking Build 5508763 - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 5
For additional information, refer to the Guest Operating System Installation Guide at http://www.vmware.com/pdf/GuestOS_guide.pdf. b) Build - Artifacts: advanced-designer-service.war, forms- service.war and catalog-service.war Tier 2 Supported Components Vendor Product Versions Disaster - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 6
Open Source Requests Python Module 2.10.0 Python Library to N/A HTTP/1.1 requests Footnotes: a) RecoverPoint SE is not currently supported b) Please log an SR with RP4VM support to request this engineering build, please also check technical notes for the latest deployment details via ASKEHC - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 7
then EHC supports this release: http://compatibilityguide.emc.com:8080/CompGuideApp/ c) Hotfix 283346 and AvPlatformOsRollup_SLES11SP3-2017-Q1-v9 OS update applied d) A newer version of VPLEX is available in the appendix. e) Recommended DDOS 6.0.2.x as a minimum. Encryption Services Dell EMC - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 8
Security vulnerabilities present in 2.0.0.2. NOTE: this is for standalone ScaleIO implementations only, 2.0.1.1 is not supported in VxRack Flex RCM. 4.1 Required to support later microcode 6.0 SP1 P4 Addresses security 6.0.1.04.00.09 vulnerabilities Addition of HF HF addresses security - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 9
SRA 5.0.5.163 Data Protection Dell EMC Avamar 7.4.1-58 New 10/13/17 Reason for change Version 4.0.25-x (XMS 4.2.2) Requires ViPR 3.6.0 as a minimum 3.6.1.0-193 6.2 Adds support for new platforms and features: Note vRO Plugin is the same as 3.6.0 SMI-S providers can be upgraded per the ViPR - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 10
Dell EMC Data Protection Advisor (DPA) 6.2.7 2.7.12 6.3.0.7 New 12/15/17 Reason for change Version 4.1.1 with Apache Struts2 HF Adds support for new platforms and features: Note vRO Plugin is the same as 3.6.0 6.2.9 Addresses bugs in Build: 6926419 previous version 2.7.13 6.3.0.118 - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 11
14.2.0 Reason for change Updated to include new versions from factory - note an IA may be required for certain EHC components on a higher revision. Adds support for vSphere 6.5 new install/upgrade. Note also requires the EHC Update 3 modules Foundation/Data Protection/SRM Disaster Recovery. XtremIO - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 12
ESA-2017-167 & ESA-2018-001 require security roll ups and hotfixes, see support.emc.com/kb/515202 & support.emc.com/kb/515814 for details. b) Please contact Engineering or the CSE team directly or via ASKEHC for instructions on obtaining the SRM 6.5.1 vRO build: 7358040 required during upgrades to - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 13
- note an IA may be required for certain EHC components on a higher revision. VxBlock 350 requires an IA to use Unity code below. Adds support for vSphere 6.5 new install/upgrade. Note also requires the EHC Update 3 modules Foundation/Data Protection/SRM Disaster Recovery. VxBlock 350 requires an IA - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 14
Dell EMC EMC VPLEX 6.0 P1 6.0 SP1 P7 6.0.1.07.00.04 Addresses security vulnerabilities Virtualization Software VMware vCenter Server 6.5U1f Supported with RCM for Windows & N/A Build: 7801515 6.5.4 only Appliance (Manufacturing RCM) VMware Requires CPSD IA if NSX for vSphere - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 15
Hot fixes addresses issues discovered (requires U4 Packages) a) Please check addendum versions of RCM as well for supported array versions listed above b) All components are supported under either vSphere 6.5 or vSphere 6.0 with the exception of SRM DR (Site Recovery Manager based Disaster Recovery - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 16
on a higher revision. VxBlock 350 requires an IA to use Unity code compatible with ViPR below (see ViPR SSM) if not using 6.0.21 Adds support for vSphere 6.5 new install/upgrade. Note also requires the EHC Update 3 modules Foundation/Data Protection/SRM Disaster Recovery. VxBlock 350 requires an IA - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 17
criteria. If not using SRM DR ViPR 3.6.2 can be used with any other configuration or EHC update release. b) All components are supported under either vSphere 6.5 or vSphere 6.0 with the exception of SRM DR (Site Recovery Manager based Disaster Recovery) - the EHC Update 3/Update 4 modules are - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 18
Recoverpoint Classic CL/EX 4.4 SP1 P1 5.1.2 Dell EMC ViPR SRA 5.0.5.163 5.0.5.174 Footnotes: Reason for change Vulnerability fixes / component support. IMPORTANT see note a) below Vulnerability mitigation: https://www.vmware.com/security/advisor ies/VMSA-2018-0012.html Vulnerability mitigation - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 19
, a hotfix has been made available by VMware to remediate this issue. Please contact EHC engineering or the CSE team to obtain Hotfix 2154143 which contains instructions and a new catalogue-service.war file. SHA1#b08a5b1cb6defd5b376a9d3f3b02fd87c28d6f71 for vRA_731_HF_2154143.zip - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 20
Build: 9313334 Virtualization Software (vSphere 6.5) Reason for change New product release / support with enhancements. New product release / support with enhancements. New product release / support with enhancements. Supported when using NSX 6.3.x and above with vRA 7.3/vRO 7.3 New product - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 21
VMware Vulnerability mitigation (L1TF): vCenter https://www.vmware.com/security/advisor Server for 6.5U2b 6.5U2c ies/VMSA-2018-0020.html Windows & Build: 9451637 Note: May require an IA if using on a Appliance VxBlock - depending on the RCM being used. VMware Vulnerability mitigation ( - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 22
vSphere 6.5 based versions. Storage Arrays Dell EMC Unity HFA/AFA 4.2.0.939290 9 Patch to 4.3.1.1525703027 Patch required relating to DSA-2018101, see https://support.emc.com/kb/522032 Dell EMC VMAX 400K, 200K, 100K, 450F, 440FX, 850F 850FX Enginuity 5977.691 (min) 5977.1125 (max Enginuity - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 23
Version Disaster Recovery - Array based Replication Reason for change Dell EMC Recoverpoint Classic CL/EX 4.4 SP1 P1 5.1.2 Vulnerability fixes / component support (requires new SRA & ViPR 3.6.2). IMPORTANT see note a/b) below IMPORTANT NOTE: Please refer to Revision 10 of the ESSM further back - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 24
11/27/18 Version Reason for change Enginuity 5977.691(min)12 5978.221(max) Please check the ViPR Support Matrix to confirm versions of SMI-S provider supported. Security Hotfix Security Hotfix 6.4.3 Build: 9927516 4.7.1 (vRA 7.3.1 and above) Build: 5084751 Please refer to https://www.vmware.com - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 25
(DSA-2018-154) Security Hotfix Resolves CVE-2018-11776 - Apache Struts2 Remove Code Execution Vulnerability (DSA-2018-196). Refer to https://support.emc.com/kb/526176 and https://download.emc.com/downloads/ DL91263_Hotfix-301589-Avamar-7.5.0Security-Update-for-Avamar-ClientManager.avp?source=OLS - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 26
Disaster Recovery - Array based Replication Dell EMC Recoverpoint Classic CL/EX 4.4 SP1 P1 5.1.2.1 Multiple vulnerability fixes (requires new SRA & ViPR 3.6.2.x) Please refer to update 10 for more details. Virtual Machine based Replication Dell EMC RecoverPoint Multiple vulnerability fixes. - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 27
EMC Simple Support Matrix Appendix Enterprise Hybrid Cloud 4.1.2 Platform GA Date: August 18, 2017 5U2b 6.5u2c ep9 6.0U3b EXP 7a Security Hotfix Requires ViPR 3.6.2.x - please refer to VIPR support matrix. Please refer to https://www.vmware.com/security/advi sories/VMSA-2018-0021.html . Please - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 28
ESXi 6.0: ESXi600-201808401-BG https://kb.vmware.com/s/article/56552 VMware NSX for vSphere 6.2.7 VMware vRealize Log 4.3 Insight 6.4.4 Build: 11197766 Requires CPSD IA if running on a Block with RCM 6.0.x or 6.5.x. Requires Update 5 workflows and EHC RP4VM plugins 4.7.1 (vRA 7.3.1 - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 29
ecurity-advisory/cpuoct2018- 4428296.html#AppendixJAVA Virtual Machine based Replication Dell EMC RecoverPoint Multiple vulnerability fixes. Requires for Virtual 5.0.1.2 5.2.0.3 Update 5 modules and RP4VM plugin. Machines Replaces the withdrawn 5.2.0.2. Notes: Where components state they - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 30
Multiple components within Dell EMC VPLEX require a security update to address various vulnerabilities. Requires Update 6 packages and supports vSphere 6.0 and 6.5 (Site Recovery Manager support is only on vSphere 6.5 when using Update 6). Requires cumulative HF8 and a WAR file from EHC Engineering - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 31
R1 OS Security Update 2019 R9 - (DSA-2019-048) Refer to Dell EMC iDRAC Advisory for more information: https://www.dell.com/support/article/u s/en/19/sln315190/dell-emc-idracmultiple-vulnerabilities-cve-2018-15774and-cve-2018-15776-/Resolution Dell EMC recommends all impacted customers upgrade to - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 32
DDMC 6.1.2.30 DDMC 6.2.0.10 Integration Software Dell EMC ViPR 3.6.0.2 3.6.2.3 Updates and fixes Virtual Machine based Replication Dell EMC RecoverPoint Multiple vulnerability fixes. Requires for Virtual 5.0.1.2 5.2.0.5 Update 5 modules and RP4VM plugin. Machines Replaces the - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 33
Reason for change Latest RCM release and compatible versions of array code. VxBlock 350 requires an IA to upgrade to Unity 4.5.1 - 4.4.1 is not supported by ViPR. Latest RCM release and compatible versions of array code. Unity code needs to match ESSM version in this revision of 4.5.1. Latest RCM - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 34
to address various vulnerabilities. Resolution: The following Dell EMC Data Protection Advisor releases contain a resolution to these vulnerabilities: 4.3.1 https://support.emc.com/kb/531911 Summary: Multiple components within Dell EMC SRM and SMR require a security update to address various - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 35
https://support.emc.com/kb/532303 Virtual Machine based Replication Dell EMC RecoverPoint for Virtual 5.0.1.2 Machines 5.2.1 5.2.2 Multiple vulnerability fixes. Notes: DSA-2019-081: Dell EMC Enterprise Hybrid - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 36
Business for 7.3 7.6 Cloud vRealize Operations Manager 6.6.1 NSX-V 6.4.2 (6.3.4 - 6.4.1 unsupported) Other EHC components or updates not listed have no dependencies and are supported. Microsoft SQL Server 2014 SP2 2016 SP2 Data Protection Note: This is for EHC OMDB / vRA IaaS and not for - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 37
is at iDRAC version 3.30.30.30. Details: https://www.dell.com/support/article/u s/en/19/sln316930 HOTFIX 309443 updates the OpenSSL library in Ruby to address this Object Comparison vulnerability. Refer to KB Article 513978 for instructions on applying the hotfix. Dell EMC The 2019 R2 OS Security - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 38
Aligned to above RCM releases Please review the Solutions Enabler version required on the ViPR support Matrix covering this release. Please review the Solutions Enabler version required on the ViPR support Matrix covering this release. Please review the Solutions Enabler version required on the ViPR - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 39
VMware vSphere ESXi VMware N/A server hypervisor VMware vCenter Server for N/A Appliance 6.5 Or any HF written for it. Latest version support. 2.6 3.6.2.4 From ViPR 3.6.1.4 the TLS 1.0 protocol must be disabled for all requests coming into ViPR Controller, allowing only TLS 1.2 ad - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 40
Site Recovery Manager Disaster Recovery has been deprecated and is replaced by Recoverpoint for Virtual Machines Disaster Recovery. No further development or support is planned for Site Recovery Manager with Enterprise Hybrid Cloud. Refer to Dell EMC Enterprise Hybrid Cloud 2019 R01 Security Update - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 41
EMC Simple Support Matrix Appendix Enterprise Hybrid Cloud 4.1.2 Platform GA Date: August 18, 2017 Platform Appendix Revision: 20 Platform Appendix Posting Date: January 31, 2020 Tier 1 Native Components - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 42
code (apart from the Unity code). The current version of Unity code (VxBlock 350) is not supported by ViPR and awaiting a new qualification, other platforms without an * are supported. Dell EMC VxBlock 1000 (Not Unity)* Not applicable RCM 6.5.12 Requires ViPR 3.6.x for array firmware versions - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 43
Storage Arrays Dell EMC VPLEX 6.0.0.01.00.07 6.2.0.0 Requires ViPR 3.6.x for array firmware versions. Requires ViPR 3.6.2.x and if used with a VxBlock requires an IA to be submitted for use. Virtualization Software (vSphere 6.5) VMware vSphere ESXi VMware N/A server hypervisor VMware - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 44
s 7.0 or above vRealize Business for Cloud 7.6 or above vRealize Log Insight 4.6.1 or above NSX for vSphere - not supported with 6.3.7 ESXi Hypervisor supported all versions above 6.0 vCSA - confirm compatibility with vCG. 6.4.6 Requires U5 or greater and vRealize Build: 14819921 Business - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 45
array code (apart from the Unity code). The current version of Unity code (VxBlock 350) is 5.0.2.0.5.009 (may require an IA for support). Requires ViPR 3.6.x for array firmware versions. Dell EMC VxBlock 340, 350, 540, 740 Not applicable RCM 6.7.5.2 Unity 5.0.2.0.5.009 New vSphere 6.5 release - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 46
versions of array code (apart from the Unity code). The current version of Unity code (VxBlock 350) is 5.0.2.0.5.009 (may require an IA for support). Requires ViPR 3.6.x for array firmware versions. Storage Arrays Dell EMC Unity Virtualization Software 4.2.0.9392909 5.0.2.0.5.009 Latest version - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 47
vRealize Operations s 7.0 or above vRealize Business for Cloud 7.6 or above vRealize Log Insight 4.6.1 or above NSX for vSphere - not supported with 6.3.7 ESXi Hypervisor supported all versions above 6.0 vCSA - confirm compatibility with vCG. SQL 2016 SP2 Cumulative Update 12 (For vRA and EHC OMDB - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 48
EMC Simple Support Matrix Appendix Enterprise Hybrid Cloud 4.1.2 Platform GA Date: August 18, 2017 Platform Appendix Revision: 23 Platform Appendix Posting Date: July, 7th 2020 Tier 1 Native Components - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 49
or above vRealize Business for Cloud 7.6 or above vRealize Log Insight 4.6.1 or above NSX for vSphere - not supported with 6.3.7 ESXi Hypervisor supported all versions above 6.0 vCSA - confirm compatibility with vCG. 5.2.2.3 Multiple vulnerability fixes. Requires Update 5 modules and RP4VM plugin - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 50
EMC Simple Support Matrix Appendix Enterprise Hybrid Cloud 4.1.2 Platform GA Date: August 18, 2017 Platform Appendix Revision: 24 Platform Appendix Posting Date: September 10th, 2020 Tier 1 Native Components - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 51
of array code (apart from the Unity code). The current version of Unity code (VxBlock 350) is 5.0.3.0.5.014 (may require an IA for support). Requires ViPR 3.6.x for array firmware versions. Dell EMC VxBlock 340, 350, 540, 740 RCM 6.7.7.0 Not applicable Unity 5.0.3.0.5.014 New vSphere 6.5 release - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 52
code (apart from the Unity code). The current version of Unity code (VxBlock 350) is 5.0.3.0.5.014 (may require an IA for support). Requires ViPR 3.6.x for array firmware versions. Storage Arrays Dell EMC Unity Data Protection Dell EMC Avamar 4.2.0.9392909 5.0.3.0.5.014 7.4.1-58 19.3 EMC - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 53
EMC Simple Support Matrix Appendix Enterprise Hybrid Cloud 4.1.2 Platform GA Date: August 18, 2017 Platform Appendix Revision: 26 Platform Appendix Posting Date: March 26th, 2021 Tier 1 Native Components - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 54
6.5.0-16904859 (built 2020-09-16) https://communities.vmware.com /docs/DOC-32872 4.2.0.9392909 6.0.0.01.00.07 5.0.6.0.5.008 6.2 P3 (6.2.0.03.00.02) IA required. Latest version supported by ViPRC 3.6.2.6 Requires ViPR-C 3.6.2.6. - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 55
Data Protection Dell EMC Data Domain Operating System Hardware DD3300 Integration software Dell EMC EMC ViPR Controller Virtualization 3.6.0.2 VMware NSX-V 6.2.7 VMware vRealize Automation / 7.3 Orchestrator Microsoft SQL Server 2014 SP2 6.2.0.35 (6.2.0.35635767) 3.6.2.6 Details: - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 56
later. Important note for RP4VM: RecoverPoint for VMs: Flash/Flex plugin removed from vSphere following a VC upgrade to 6.7 U3L (Build 17137327) https://www.dell.com/support/kb doc/000180750 - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 57
EMC Simple Support Matrix Appendix Enterprise Hybrid Cloud 4.1.2 Platform GA Date: August 18, 2017 Platform Appendix Revision: 27 Platform Appendix Posting Date: June 10th, 2021 Tier 1 Native Components - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 58
VxBlock 340, 350, 540, 740 VxBlock 340 (RCM 7.0.3.2)* Not applicable VxBlock 350, 540, 740 (RCM 7.0.4.0)* Important note * Not compatible with RP4VM 5.3.1.1. Support targeted for 5.3.2 (not released yet) vRO vCenter plug-in for vSphere needs to be updated to version 6.5.0-16904859 (built 2020-09 - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 59
Dell EMC VPLEX Note: vSphere release to address VMSA-2021-0010 (CVE-202121985, CVE-2021-21986). 4.3 8.28.3 New vRealize Stack version support which is compatible with vRealize Automation 7.6. 4.2.0.9392909 5.0.7.0.5.008 ViPR-C RPQ required 6.0.0.01.00.07 6.2 P4 (6.2.0.04.00.07) ViPR-C RPQ - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 60
RPQ needed for: MDS Firmware, vSphere version VMAX3 All-Flash version, Solutions Enabler (SMI-S), Unity VMware RPQ required for NSX-V 6.4.11 to support vRA/vRO 7.6. Note: Release contains security fixes. ViPR-C RPQ needed for: MDS Firmware, vSphere version VMAX3 All-flash version, Solutions Enabler - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 61
Firmware, vSphere version, VMAX3 All-flash version, Solutions Enabler (SMI-S), Unity IA needed for RP4VM 5.3.x VMware RPQ required for NSX-V 6.4.11 to support vRA/vRO 7.6. vRO vCenter plug-in for vSphere needs to be updated to version 6.5.0-16904859 (build 2020-0916) https://communities.vmware.com - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 62
NSX-V https://communities.vmware.com /docs/DOC-32872 Note: Release contains security fixes. ViPR-C RPQ required ViPR-C RPQ required ViPR-C RPQ required Note 1: IA required Support note: NSX-V 6.4.x End of General Support is 2022-01-16. Please contact EHC - Dell VNX8000 | Enterprise Hybrid Cloud 4.1.2 Simple Support Matrix - Page 63
New features (tested with vRA 7.6) Bug fixes - Inc: Potential Data Loss through use of change consistency group when using RP4VM: https://support.emc.com/kb/540748 (login required) Note: Unless specifically identified in the ESSM there are no dependencies between an update and a component. For
Copyright © 2021 Dell Inc. or its subsidiaries. All rights reserved.
Published November 2021
Dell believes the information in this publication is accurate as of its publication date. The information is subject to change without notice.
THE INFORMATION IN THIS PUBLICATION IS PROVIDED “AS-IS.“ DELL MAKES NO REPRESENTATIONS OR WARRANTIES OF
ANY KIND WITH RESPECT TO THE INFORMATION IN THIS PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. USE, COPYING, AND DISTRIBUTION OF ANY
DELL SOFTWARE DESCRIBED IN THIS PUBLICATION REQUIRES AN APPLICABLE SOFTWARE LICENSE.
Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be the property of their respective owners.
Published in the USA.
For the most up-to-date regulatory document for your product line, go to Dell EMC Online Support (https://support.emc.com).
Dell EMC Enterprise Hybrid Cloud
4.1.2
Simple Support Matrix
November 2021
REV 28