Dell VNXe2 Replacing a 2.5 inch disk drive

Dell VNXe2 Manual

Get Dell VNXe2 PDF manuals and user guides View all Dell VNXe2 manuals
Add to My Manuals
Save this manual to your list of manuals

Dell VNXe2 manual content summary:

  • Dell VNXe2 | Replacing a 2.5 inch disk drive - Page 1
    EMC® VNXe® Replacing a 2.5-inch disk drive 302-000-212 REV 01 July, 2015 This document describes how to replace a disk drive in a supported 25-slot enclosure: l 25-slot disk processor enclosure (DPE) l 25-slot disk-array enclosure (DAE) The 25-slot enclosures use 2.5-inch disks. The disk slots
  • Dell VNXe2 | Replacing a 2.5 inch disk drive - Page 2
    identify its intended location in the system. Refer to your Unisphere online help (Servicing your system > Adding or replacing faulted hardware components > Replace a faulted hardware component) for instructions on how to identify failures, order new parts and handle hardware components. Handling
  • Dell VNXe2 | Replacing a 2.5 inch disk drive - Page 3
    Replacing a 2.5-inch disk drive NOTICE These procedures are not a substitute for the use of an ESD kit. Follow them only in the event of an emergency. l Before touching any unit, touch a bare (unpainted) metal surface of the cabinet/rack or enclosure. l Before removing any unit from its antistatic
  • Dell VNXe2 | Replacing a 2.5 inch disk drive - Page 4
    the component. Ensure that the back end of the replaceable unit is supported while installing or removing it. Dropping a replaceable unit could result in personal remove or install a replaceable unit. Take time to read the instructions carefully. l Store a replaceable unit in the antistatic bag and
  • Dell VNXe2 | Replacing a 2.5 inch disk drive - Page 5
    of tasks for replacing a disk To replace a disk you must complete the tasks below in the order in which they appear. This document provides instructions for completing each task. 1. Open the console, if it covers the front of the enclosure with the faulted disk. 2. Remove the front bezel from
  • Dell VNXe2 | Replacing a 2.5 inch disk drive - Page 6
    3. Remove the faulted disk. 4. Unpack the replacement disk. 5. Install the replacement disk in the slot. 6. Reinstall the front bezel on the enclosure. 7. Close the console, if present. 8. Verify the operation of the replacement disk. Opening the console The console is a protruding plastic banner on
  • Dell VNXe2 | Replacing a 2.5 inch disk drive - Page 7
    Replacing a 2.5-inch disk drive 2. Press the two latch buttons on the bezel surface to release the bezel from the cabinet. 3. Pull the bezel off the cabinet and put it on a clean, static-free surface. Figure 2 Removing the front bezel CL5261 Removing a disk Before you begin Identify the faulted
  • Dell VNXe2 | Replacing a 2.5 inch disk drive - Page 8
    that follows. Procedure 1. Attach an ESD wristband to your wrist and the enclosure in which you are installing the disk. 2. Align the disk with the guides in the slot. 3. With the disk carrier latch fully open, gently push the disk into the slot. The latch begins to rotate downward when its
  • Dell VNXe2 | Replacing a 2.5 inch disk drive - Page 9
    health monitor shows the new disk as faulted, try re-seating the disk in the enclosure. If it remains faulted, contact your service provider. Returning a faulted part We appreciate the return of defective material within 5 business days (for US returns). For International customers, please return
  • Dell VNXe2 | Replacing a 2.5 inch disk drive - Page 10
    parts, from Unisphere, click Support > Need more Help? > Customer Replaceable Parts > Return a Customer Replaceable Part to enter the EMC Online Support website. If your screen does not show the Return a customer replaceable part option, contact your service provider for instructions on what to do
  • Dell VNXe2 | Replacing a 2.5 inch disk drive - Page 11
    used herein are the property of their respective owners. For the most up-to-date regulatory document for your product line, go to EMC Online Support (https://support.emc.com). Returning a faulted part 11
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
EMC
®
VNXe
®
Replacing a 2.5-inch disk drive
302-000-212
REV 01
July, 2015
This document describes how to replace a disk drive in a supported 25-slot enclosure:
l
25-slot disk processor enclosure (DPE)
l
25-slot disk-array enclosure (DAE)
The 25-slot enclosures use 2.5-inch disks. The disk slots are located behind the
enclosure's front bezel.
Topics include:
l
Before you start
..........................................................................................................
2
l
Handling replaceable units
........................................................................................
2
l
Handling disks
...........................................................................................................
5
l
Replacing the faulted hardware component
...............................................................
5
l
Returning a faulted part
.............................................................................................
9