Dell VNXe2 VNXe Series Configuration Worksheet

1 of 2

EMC® VNXe® Series Configuration Worksheet

EMC

®

VNXe

®

Series Configuration Worksheet

Part Number: 300-015-329 | Rev 03

Use this worksheet to collect and record information for configuring the EMC

®

VNXe

®

system using the following:

•

EMC Online Support

•

VNXe Connection Utility

•

Unisphere Configuration Wizard

This worksheet should be used in conjunction with the

guide. Refer to the

and

for an installation overview and additional guidance for setting up the VNXe system.

Note:

Sites with restricted Internet access must obtain the Connection Utility software and product license keys to configure the

system. Refer to the VNXe Series Release Notes for details.

Item

Value

EMC Online Support account information

EMC Online Support account name:

First and last name associated with your EMC Online Support account.

Primary language:

Preferred language for the account.

Email address:

Email address to receive product notifications and updates.

System management address

VNXe system Product ID / Serial Number:

Refer to the serial number tag on the back of the DPE component for the system ID.

Use this ID in the Connection Utility to auto-discover a VNXe system on a subnet.

Name:

If you obtained the system's IP address through DHCP, use the system serial

number for the name.

Management IP Address:

Management IPv4 or IPv6 address to assign to the VNXe system.

Subnet mask:

IP address mask that identifies the range of IP addresses in the subnet where VNXe

is connected.

Gateway:

Default gateway IP address of the VNXe management interface.

Prefix Length (IPv6 only):

The number of significant bits in the address that will be used for routing purposes.

Unisphere login information:

When logging into Unisphere for the first time, use the default system account user

name and password.

User Name

: admin

Password

: Password123#