Dell Vostro 16 5630 Service Manual
Dell Vostro 16 5630 Manual
 |
View all Dell Vostro 16 5630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell Vostro 16 5630 manual content summary:
- Dell Vostro 16 5630 | Service Manual - Page 1
Vostro 16 5630 Service Manual Regulatory Model: P117F Regulatory Type: P117F006 October 2022 Rev. A00 - Dell Vostro 16 5630 | Service Manual - Page 2
use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2022 Dell Inc. or its subsidiaries. All rights reserved. Dell - Dell Vostro 16 5630 | Service Manual - Page 3
discharge-ESD protection...7 ESD field service kit ...8 Transporting sensitive components...9 After working inside your computer...9 BitLocker...9 Chapter 2: Removing and installing components 10 Recommended tools...10 Screw list...10 Major components of Vostro 16 5630...11 Base cover...13 Removing - Dell Vostro 16 5630 | Service Manual - Page 4
USB drive in Windows 69 Updating the BIOS in Linux and Ubuntu...69 Updating the BIOS from the F12 One-Time boot menu 69 Chapter 5: Troubleshooting...71 Handling swollen Lithium-ion batteries...71 Locate the Service Tag or Express Service Code of your Dell computer 71 4 Contents - Dell Vostro 16 5630 | Service Manual - Page 5
System-diagnostic lights...72 SupportAssist diagnostics...73 Built-in self-test (BIST)...73 M-BIST...73 LCD Built-in Self Test (BIST)...74 Recovering the operating system...74 WiFi power cycle...74 Contents 5 - Dell Vostro 16 5630 | Service Manual - Page 6
and the contacts. CAUTION: You should only perform troubleshooting and repairs as authorized or directed by the Dell technical assistance team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. See the safety instructions that is shipped with the product or at - Dell Vostro 16 5630 | Service Manual - Page 7
taken before performing any disassembly instructions. Observe the following safety potential. This is done through the use of a field service electrostatic discharge (ESD) kit. When connecting a bonding wire may not be obvious, such as intermittent problems or a shortened product life span. As the - Dell Vostro 16 5630 | Service Manual - Page 8
The more difficult type of damage to recognize and troubleshoot is the intermittent (also called latent or "walking between your skin, the ESD mat, and the hardware is known as bonding. Use only Field Service kits with a wrist strap, mat, and bonding wire. Never use wireless wrist straps. Always be - Dell Vostro 16 5630 | Service Manual - Page 9
to keep sensitive parts separate from all insulator parts while performing service and that they use anti-static bags for transporting sensitive components /recoverykey For more information, refer to Windows Support article: Finding your BitLocker recovery key in Windows Working inside your computer - Dell Vostro 16 5630 | Service Manual - Page 10
2 Removing and installing components NOTE: The images in this document may differ from your computer depending on the configuration you ordered. Recommended tools The procedures in this document may require the following tools: ● Phillips screwdriver #0 ● Phillips screwdriver #1 ● Plastic scribe - Dell Vostro 16 5630 | Service Manual - Page 11
I/O board RJ45 network-port assembly M2x3 M2x3 M2x5 Touchpad bracket Touchpad Display hinges M1.6x2 M2x1.8 M2.5x5 Quantity 2 1 2 1 2 3 3 2 6 Screw image Major components of Vostro 16 5630 The following image shows the major components of Vostro 16 5630. Removing and installing components 11 - Dell Vostro 16 5630 | Service Manual - Page 12
12 Removing and installing components - Dell Vostro 16 5630 | Service Manual - Page 13
. Palm-rest and keyboard assembly 11. I/O board 12. RJ45 bracket 13. Wireless card 14. M.2 2280 solid-state drive 15. M.2 2230 solid-state drive 16. Coin-cell battery 17. Fan 18. Fingerprint module NOTE: Dell provides a list of components and their part numbers for the original system configuration - Dell Vostro 16 5630 | Service Manual - Page 14
14 Removing and installing components - Dell Vostro 16 5630 | Service Manual - Page 15
Steps 1. Remove the seven screws (M2x4) that secure the base cover to the palm-rest and keyboard assembly. 2. Loosen the two captive screws that secure the base cover to the palm-rest and keyboard assembly. 3. Using a plastic scribe, pry the base cover from the top left and continue to work on the - Dell Vostro 16 5630 | Service Manual - Page 16
any kind to pry on or against the battery. ● Ensure any screws during the servicing of this product are not lost or misplaced, to prevent accidental puncture or damage to instance, contact Dell technical support for assistance. See www.dell.com/contactdell. 16 Removing and installing components - Dell Vostro 16 5630 | Service Manual - Page 17
batteries, see Handling swollen Lithium-ion batteries. Removing the battery Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. 1. Follow the procedure in Before working inside your computer. About this task NOTE: Before removing the base cover - Dell Vostro 16 5630 | Service Manual - Page 18
About this task The following image(s) indicate the location of the battery and provides a visual representation of the installation procedure. Steps 1. Align the screw holes on the battery with the screw holes on the palm-rest and keyboard assembly. 2. Replace the five screws (M2x3) that secure - Dell Vostro 16 5630 | Service Manual - Page 19
Steps 1. Disconnect the fan cable from the system board. 2. Remove the two screws (M2x3) that secure the left fan to the palm-rest and keyboard assembly. 3. Lift the fan off the palm-rest and keyboard assembly. Installing the fan Prerequisites If you are replacing a component, remove the existing - Dell Vostro 16 5630 | Service Manual - Page 20
Steps 1. Align the screw holes of the fan with the screw holes on the palm-rest and keyboard assembly. 2. Replace the two screws (M2x3) that secure the fan to the palm-rest and keyboard assembly. 3. Connect the fan cable to the system board. Next steps 1. Install the base cover. 2. Follow the - Dell Vostro 16 5630 | Service Manual - Page 21
Steps 1. Remove the screw (M2x3) that secures the wireless-card bracket to the system board. 2. Lift the wireless-card bracket off the wireless card. 3. Disconnect the antenna cables from the wireless card. 4. Slide and remove the wireless card from the wireless-card slot. Installing the wireless - Dell Vostro 16 5630 | Service Manual - Page 22
Steps 1. Align the notch on the wireless card with the tab on the wireless-card slot and insert the wireless card at an angle into the wireless-card slot. 2. Connect the antenna cables to the wireless card. 3. Align and place the wireless-card bracket on the wireless card. 4. Replace the screw (M2x3 - Dell Vostro 16 5630 | Service Manual - Page 23
Solid-state drive Removing the M.2 2230 solid-state drive Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task NOTE: Before removing the base cover, ensure that there is no SD card installed in the SD card slot on your computer. NOTE - Dell Vostro 16 5630 | Service Manual - Page 24
About this task NOTE: This computer supports two solid-state drive form factors. ● M.2 2230 ● M.2 2280 If you are replacing the M.2 2280 solid-state drive with an M.2 2230 solid-state drive, the following - Dell Vostro 16 5630 | Service Manual - Page 25
NOTE: Device Encryption will be triggered when either the system board or storage (SSD) is replaced. Refer to BitLocker for more information on suspending BitLocker The following image(s) indicate the location of the M.2 2280 solid-state drive and provides a visual representation of the removal - Dell Vostro 16 5630 | Service Manual - Page 26
for computers shipped with a NVIDIA GeForce RTX 2050 Ti graphics card Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task NOTE: Before - Dell Vostro 16 5630 | Service Manual - Page 27
shipped with a NVIDIA GeForce RTX 2050 Ti graphics card Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. If you are replacing a component, remove the existing component before performing the installation process. About this task The - Dell Vostro 16 5630 | Service Manual - Page 28
the heat sink for computers shipped without a discrete graphics card Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task NOTE: Before - Dell Vostro 16 5630 | Service Manual - Page 29
heat sink for computers shipped without a discrete graphics card Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. If you are replacing a component, remove the existing component before performing the installation process. About this task The - Dell Vostro 16 5630 | Service Manual - Page 30
in After working inside your computer. Speaker Removing the speakers Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. About this - Dell Vostro 16 5630 | Service Manual - Page 31
cable from the routing guides on the palm-rest and keyboard assembly. 6. Lift the speakers along with their cables off the palm-rest and keyboard assembly. Installing the speakers Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. Removing - Dell Vostro 16 5630 | Service Manual - Page 32
posts are threaded through the rubber grommets on the speaker. 3. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly. 4. Route the WLAN cable through the routing guides on the palm-rest and keyboard assembly. 5. Adhere the tapes that secure the WLAN cable to - Dell Vostro 16 5630 | Service Manual - Page 33
your computer. Coin-cell battery Removing the coin-cell battery Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task NOTE: Before removing - Dell Vostro 16 5630 | Service Manual - Page 34
in After working inside your computer. I/O board Removing the I/O board Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 34 Removing and installing - Dell Vostro 16 5630 | Service Manual - Page 35
About this task NOTE: Before removing the base cover, ensure that there is no SD card installed in the SD card slot on your computer. NOTE: The I/O board includes a RJ45 network-port assembly. If you are replacing the I/O board, ensure that you remove the RJ45 network-port assembly from the old I/O - Dell Vostro 16 5630 | Service Manual - Page 36
the palm-rest and keyboard assembly. Installing the I/O board Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. If you are replacing a component, remove the existing component before performing the installation process. About this task The - Dell Vostro 16 5630 | Service Manual - Page 37
reader Removing the power button with optional fingerprint reader Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the I/O board. About this - Dell Vostro 16 5630 | Service Manual - Page 38
. Installing the power button with optional fingerprint reader Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. If you are replacing a component, remove the existing component before performing the installation process. About this task - Dell Vostro 16 5630 | Service Manual - Page 39
your computer. Power-button module Removing the power button Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the I/O board. About this - Dell Vostro 16 5630 | Service Manual - Page 40
Installing the power button Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. If you are replacing a component, remove the existing component before performing the installation process. About this task The following image(s) indicate the - Dell Vostro 16 5630 | Service Manual - Page 41
and keyboard assembly. Installing the power-adapter port Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. If you are replacing a component, remove the existing component before performing the installation process. Removing and installing - Dell Vostro 16 5630 | Service Manual - Page 42
inside your computer. Display assembly Removing the display assembly Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task NOTE: Before - Dell Vostro 16 5630 | Service Manual - Page 43
latch to the system board. 6. Open the latch and disconnect the display cable from the system board. 7. Remove the display cable from the routing guides on the palm-rest and keyboard assembly. 8. At an angle, gently lift the palm-rest and keyboard assembly off the display assembly. Removing and - Dell Vostro 16 5630 | Service Manual - Page 44
Installing the display assembly Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. If you are replacing a component, remove the existing component before performing the installation process. About this task The following image(s) indicate the - Dell Vostro 16 5630 | Service Manual - Page 45
palm-rest and keyboard assembly. 7. Route the display cable through the routing guides on the palm-rest and keyboard assembly. 8. Connect the display cable to the : The information in this section is intended for authorized service technicians only. 1. Follow the procedure in Before working inside - Dell Vostro 16 5630 | Service Manual - Page 46
system board. Installing the Trusted Platform Module (TPM) board Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. If you are replacing a component, remove the existing component before performing the installation process. About this task The - Dell Vostro 16 5630 | Service Manual - Page 47
System board Removing the system board Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the M.2 2230 solid-state drive or M.2 2280 solid-state drive, whichever applicable. 4. Remove the wireless card. 5. Remove the heat sink for - Dell Vostro 16 5630 | Service Manual - Page 48
Steps 1. Remove the three screws (M2.5x5) that secure the right display hinge to the system board. 2. Open the right display hinge at an angle of 90 degrees. 3. Peel the tape that secures the display-cable connector latch to the system board. 4. Open the latch and disconnect the display cable from - Dell Vostro 16 5630 | Service Manual - Page 49
screws (M2x1.8) that secure the system board to the palm-rest and keyboard assembly. 16. Lift the system board at angle off the palm-rest and keyboard assembly, to CAUTION: The information in this section is intended for authorized service technicians only. If you are replacing a component, remove - Dell Vostro 16 5630 | Service Manual - Page 50
Steps 1. Install the system board at an angle and ensure that the ports are properly aligned with the port openings. 2. Place the system board on the palm-rest and keyboard assembly. 3. Align the screw holes on the system board with the screw holes on the palm-rest and keyboard assembly. 4. Replace - Dell Vostro 16 5630 | Service Manual - Page 51
Adhere the tapes that secure the power-adapter port cable to the system board. 16. Connect the display cable from the system board and close the latch. 17. CAUTION: The information in this section is intended for authorized service technicians only. 1. Follow the procedure in Before working inside - Dell Vostro 16 5630 | Service Manual - Page 52
Steps 1. Open the latch of the touchpad connector and disconnect the touchpad cable from the touchpad. 2. Remove the three screws (M1.6x2) that secure the touchpad bracket to the palm-rest and keyboard assembly. 3. Lift the touchpad bracket off the palm-rest and keyboard assembly. 4. Remove the two - Dell Vostro 16 5630 | Service Manual - Page 53
and keyboard assembly Removing the palm-rest and keyboard assembly Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the fan. 4. Remove the - Dell Vostro 16 5630 | Service Manual - Page 54
keyboard assembly. Installing the palm-rest and keyboard assembly Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. If you are replacing a component, remove the existing component before performing the installation process. About this task - Dell Vostro 16 5630 | Service Manual - Page 55
Steps Place the palm-rest and keyboard assembly on a flat and clean surface and perform the post-requisites to install the palm-rest and keyboard assembly. Next steps NOTE: The system board can be removed and installed along with the heat sink, when you replace the palm-rest and keyboard assembly. - Dell Vostro 16 5630 | Service Manual - Page 56
3 Drivers and downloads When troubleshooting, downloading or installing drivers it is recommended that you read the Dell Knowledge Based article, Drivers and Downloads FAQ 000123347. 56 Drivers and downloads - Dell Vostro 16 5630 | Service Manual - Page 57
4 System setup CAUTION: Unless you are an expert computer user, do not change the settings in the BIOS Setup program. Certain changes can make your computer work incorrectly. NOTE: Depending on the computer and its installed devices, the items listed in this section may or may not be displayed. - Dell Vostro 16 5630 | Service Manual - Page 58
Manufacture Date Displays the manufacture date of the system. Ownership Date Displays the ownership date of the system. Express Service Code Displays the express service code of the system. Ownership Tag Displays the Ownership Tag of the system. Signed Firmware Update Displays whether the - Dell Vostro 16 5630 | Service Manual - Page 59
Table 3. System setup options-System information menu (continued) Overview Processor L2 Cache Displays the processor L2 Cache size. Processor L3 Cache Displays the processor L3 Cache size. Microcode Version Displays the microcode version. Intel Hyper-Threading Capable Displays whether the - Dell Vostro 16 5630 | Service Manual - Page 60
or disable booting from USB mass storage devices such as external hard drive, optical drive, and USB drive. By default, the Enable USB Boot Support option is enabled. Disable USB4 PCIE Tunneling Video/Power only on Type-C Ports Disable the USB4 PCIE Tunneling option. By default, the option is - Dell Vostro 16 5630 | Service Manual - Page 61
fan and processor heat management to adjust the system performance, noise, and temperature. By default, the Optimized option is enabled. USB Wake Support Enable USB Wake Support When enabled, the USB devices like a mouse or keyboard can be used to wake the system from Standby, Hibernate, and Power - Dell Vostro 16 5630 | Service Manual - Page 62
is removed before Standby, the BIOS will remove power from all of the USB ports to conserve battery power. By default, the Enable USB Wake Support option is disabled. Wake on Dell USB-C Dock When enabled, connecting a Dell USB-C Dock will wake the system from Standby, Hibernate, and Power Off. By - Dell Vostro 16 5630 | Service Manual - Page 63
Start Data Wipe option is disabled. Absolute Enable or disable or permanently disable the BIOS module interface of the optional Absolute Persistence Module service from Absolute software. By default, the option is enabled. WARNING: The 'Permanently Disabled' option can only be selected once. When - Dell Vostro 16 5630 | Service Manual - Page 64
Master Password Lockout When enabled, this disables the master password support. By default, the option is disabled. Allow Non-Admin . By default, the option is enabled. BIOSConnect Enable or disable cloud Service operating system recovery if the main operating system fails to boot with the - Dell Vostro 16 5630 | Service Manual - Page 65
is enabled. Extend BIOS POST Time Set the BIOS POST load time. By default, the 0 seconds option is enabled. Table 16. System setup options-Virtualization menu Virtualization Intel Virtualization Technology Enable Intel Virtualization Technology (VT) When enabled, the system will be able - Dell Vostro 16 5630 | Service Manual - Page 66
Table 16. System setup options-Virtualization menu (continued) Virtualization ● Intel Hyper-Threading ● All CPU cores (Multi-Core Support) ● Intel Virtualization Technology ● Intel VT for Direct I/O By default, the option is disabled. Table 17. System setup options-Performance menu Performance - Dell Vostro 16 5630 | Service Manual - Page 67
Table 18. System setup options-System Logs menu (continued) System Logs License Information Displays the license information of the system. System and setup password Table 19. System and setup password Password type System password Setup password Description Password that you must enter to log - Dell Vostro 16 5630 | Service Manual - Page 68
. 2. Click Product support. In the Search support box, enter the Service Tag of your computer, and then click Search. NOTE: If you do not have the Service Tag, use the SupportAssist feature to automatically identify your computer. You can also use the product ID or manually browse for your computer - Dell Vostro 16 5630 | Service Manual - Page 69
you saved the BIOS update file. 8. Double-click the BIOS update file icon and follow the on-screen instructions. For more information, see knowledge base article 000124211 at www.dell.com/support. Updating the BIOS using the USB drive in Windows Steps 1. Follow the procedure from step 1 to step 6 in - Dell Vostro 16 5630 | Service Manual - Page 70
Steps 1. From a turn off state, insert the USB drive where you copied the flash into a USB port of the computer. 2. Turn on the computer and press F12 to access the One-Time Boot Menu, select BIOS Update using the mouse or arrow keys then press Enter. The flash BIOS menu is displayed. 3. Click Flash - Dell Vostro 16 5630 | Service Manual - Page 71
Service Code. To view relevant support resources for your Dell computer, we recommend entering the Service Tag or Express Service Code at www.dell.com/support. For more information on how to find the Service Tag for your computer, see Locate the Service Tag for your Dell Laptop. Troubleshooting - Dell Vostro 16 5630 | Service Manual - Page 72
light codes and recommended solutions are intended for Dell service technicians to troubleshoot problems. You should only perform troubleshooting and repairs as authorized or directed by the Dell technical assistance team. Damage due to servicing that is not authorized by Dell is not covered - Dell Vostro 16 5630 | Service Manual - Page 73
(Amber,White) Problem description 4,1 Memory messages that indicate if problems were encountered during the test EC) failures. NOTE: M-BIST can be manually initiated before POST (Power On Self Test detected with the system board b. AMBER: Indicates a problem with the system board 3. If there is a - Dell Vostro 16 5630 | Service Manual - Page 74
if the screen abnormality you are experiencing is an inherent problem with the LCD (screen) of the Dell laptop or with You can also download it from the Dell Support website to troubleshoot and fix your computer when it fails to instructions on how to conduct a WiFi power cycle: 74 Troubleshooting - Dell Vostro 16 5630 | Service Manual - Page 75
NOTE: Some ISPs (Internet Service Providers) provide a modem/router combo device. Steps 1. Turn off your computer. 2. Turn off the modem. 3. Turn off the wireless router. 4. Wait for 30 seconds. 5. Turn on the wireless router. 6. Turn on the modem. 7. Turn on your computer. Troubleshooting 75
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
 |
 |
Vostro 16 5630
Service Manual
Regulatory Model: P117F
Regulatory Type: P117F006
October 2022
Rev. A00