Dell W2607C Owner's Manual - Page 35

TV Menu Messages While using your LCD TV display, the following messages may appear. Message Auto Adjust Out of Range No Video Input TV Button Lock In Power Save Mode Press any key on keyboard or move mouse In Power Save Mode Please Check Video Signal Self Test Possible Solution No action required, the LCD TV display is performing an auto adjustment. Check the optimal resolution settings. You may need to download a new video driver. For more information, go to support.dell.com. 1 Check that all cables are properly connected. 2 Ensure the proper source is selected in the Input Select menu. See "Input Select Menu" on page 24 for more information. To unlock, press Menu on your remote control, select Setup. Use the side panel buttons to unlock the TV Menu and side panel buttons: 1 Press the Menu button. A message appears stating that the TV Menu and buttons are locked. 2 While the message is on the screen, press the volume decrease and channel up buttons on the side panel simultaneously. A message appears stating that the TV Menu and buttons are unlocked. If you have a computer connected to the LCD TV display and there is no signal detected, the LCD TV display goes in to sleep mode. The power light is amber when the LCD TV display in is sleep mode. Press any key on the keyboard or move the mouse to wake the LCD TV display. If you are using a video device and it has been inactive for 30 minutes the LCD TV display goes in to power save mode. The power light is amber when the LCD TV display is in power save mode. Appears for computer source when there is nothing plugged in. Select VGA or DVI from Input Select menu and nothing is plugged in. Plug a computer in to the VGA or DVI. Troubleshooting Your LCD TV Display 35