Denon AVR-1705 Owners Manual - Page 23

Setting the Subwoofer mode and Crossover Frequency

Get Denon AVR-1705 PDF manuals and user guides View all Denon AVR-1705 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

ENGLISH Setting the Subwoofer mode and Crossover Frequency 1 Use the (left) and (right) buttons to select the Subwoofer mode. 13SW MODE NORM (Initial) NORM +MAIN Press the ENTER or setting. (left) button (right) button (down) button to enter the setting and switch to the Crossover Frequency 2 Use the (left) and (right) buttons to select the Crossover Frequency. 14CR.OVER 80Hz (Initial) 40Hz 60Hz 80Hz 100Hz 120Hz 150Hz 200Hz 250Hz (left) button (right) button Press the ENTER or (down) button to enter the setting and switch to the Test Tone setting. NOTES: - Assignment of low frequency signal range - • The signals produced from the subwoofer channel are LFE signals (during playback of Dolby Digital or DTS signals) and the low frequency signal range of channels set to "SMALL" in the setup. The low frequency signal range of channels set to "LARGE" are produced from those channels. - Crossover Frequency - • When "Subwoofer" is set to "Yes" at the "Speaker Configuration Setting", set the frequency (Hz) below which the bass sound of the various speakers is to be output from the subwoofer (the crossover frequency). • For speakers set to "Small", sound with a frequency below the crossover frequency is cut, and the cut bass sound is output from the subwoofer instead. NOTE: For ordinary speaker systems, we recommend setting the crossover frequency to 80 Hz. When using small speakers, however, setting the crossover frequency to a high frequency may improve frequency response for frequencies near the crossover frequency. - Subwoofer mode - • The subwoofer mode setting is only valid when "LARGE" is set for the front speakers and "YES" is set for the subwoofer in the "Speaker Configuration" settings (see pages 19, 20). If "SMALL" is set for the front speakers or "NO" is set for the subwoofer, the subwoofer mode setting does not affect playback of low frequency signal range. • When the "+MAIN" playback mode is selected, the low frequency signal range of channels set to "LARGE" are produced simultaneously from those channels and the subwoofer channel. In this playback mode, the low frequency range expand more uniformly through the room, but depending on the size and shape of the room, interference may result in a decrease of the actual volume of the low frequency range. • When the "NORM" playback mode is selected, the low frequency signal range of channels set to "LARGE" are only produced from those channels. In this playback mode there tends to be little interference of the low frequency range in the room. • Try playing the music or movie source and select the playback mode providing the stronger low frequency range sound. 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
23
NOTES:
— Assignment of low frequency signal range —
•
The signals produced from the subwoofer channel are LFE signals (during playback of Dolby Digital or DTS signals) and the low frequency
signal range of channels set to “SMALL” in the setup. The low frequency signal range of channels set to “LARGE” are produced from
those channels.
— Crossover Frequency —
•
When “Subwoofer” is set to “Yes” at the “Speaker Configuration Setting”, set the frequency (Hz) below which the bass sound of the
various speakers is to be output from the subwoofer (the crossover frequency).
•
For speakers set to “Small”, sound with a frequency below the crossover frequency is cut, and the cut bass sound is output from the
subwoofer instead.
NOTE
:For ordinary speaker systems, we recommend setting the crossover frequency to 80 Hz. When using small speakers, however,
setting the crossover frequency to a high frequency may improve frequency response for frequencies near the crossover
frequency.
— Subwoofer mode —
• The subwoofer mode setting is only valid when “LARGE” is set for the front speakers and “YES” is set for the subwoofer in the
“Speaker Configuration” settings (see pages 19, 20).
If “SMALL” is set for the front speakers or “NO” is set for the subwoofer, the subwoofer mode setting does not affect playback of low
frequency signal range.
• When the “+MAIN” playback mode is selected, the low frequency signal range of channels set to “LARGE” are produced
simultaneously from those channels and the subwoofer channel.
In this playback mode, the low frequency range expand more uniformly through the room, but depending on the size and shape of the
room, interference may result in a decrease of the actual volume of the low frequency range.
•
When the “NORM” playback mode is selected, the low frequency signal range of channels set to “LARGE” are only produced from
those channels.
In this playback mode there tends to be little interference of the low frequency range in the room.
•
Try playing the music or movie source and select the playback mode providing the stronger low frequency range sound.
Setting the Subwoofer mode and Crossover Frequency
1
Use the
(left) and
(right) buttons to select the Subwoofer mode.
13SW MODE NORM
NORM
+MAIN
(left) button
(right) button
Press the ENTER or
(down) button to enter the setting and switch to the Crossover Frequency
setting.
(Initial)
2
Use the
(left) and
(right) buttons to select the Crossover Frequency.
14CR.OVER 80Hz
80Hz
100Hz
120Hz
150Hz
200Hz
250Hz
40Hz
60Hz
(left) button
(right) button
Press the ENTER or
(down) button to enter the setting and switch to the Test Tone setting.
(Initial)
ENGLISH