Denon AVR-1705 Owners Manual - Page 28
After setting up the system, Setting the Auto Surround Mode, Setting the Ext. In SW Level
View all Denon AVR-1705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
ENGLISH Setting the Auto Surround Mode For the three kinds of input signals as shown below, the surround mode played the last is stored in the memory. At next time it the same signal inputs, the memorized surround mode is automatically selected and the signal is played. Note that the surround mode setting is also stored separately for the different input function. SIGNAL Default Auto Surround Mode q Analog and PCM 2-channel signals STEREO w 2-channel signals of Dolby Digital, DTS or other multichannel format Dolby PLIIx Cinema e Multichannel signals of Dolby Digital, DTS or other multichannel format Dolby or DTS Surround 1 Use the (left) and (right) buttons to select the Auto Surround mode. (Initial) 22 AUTOSURR. ON ON OFF Press the ENTER or (left) button (right) button (down) button to switch the Ext. In SW Level setting. Setting the Ext. In SW Level Set the method of playback of the analog input signal connected to the Ext. In terminal. 1 Use the (left) and (right) buttons to select the Ext. In Subwoofer channel Level playback. 23 EXT.IN SW +15 +00 +05 +10 (Initial) +15 Press the ENTER or (left) button (right) button (down) button if you want to start the settings over from the beginning. After setting up the system 1 Press the SYSTEM SETUP button to finish system set up. This completes the system setup operations. Once the system is set up, there is no need to make the settings again unless other components or speakers are connected to or the speaker layout is changed. 28