Denon AVR-1705 Owners Manual - Page 44

ENGLISH 7 Set the various surround parameters. • CINEMA EQ setting CINEMA EQ OFF 8 Press the ENTER button to finish surround parameter mode. ON OFF or or • CENTER IMAGE setting C.IMAGE 0.3 0.0 or 0.3 1.0 or • TONE DEFEAT setting TONE DEF. ON ON OFF or or • SURROUND BACK SPEAKER setting SB : ON ON OFF or or • D. COMP. setting D.COMP. OFF OFF LOW or MID HIGH or NOTE: This parameter is displayed during DOLBY DIGITAL playback. • LFE setting LFE 0dB -10dB -5dB or or 0dB NOTE: This parameter is displayed during DOLBY DIGITAL playback. • DEFAULT setting DEFAULT Y/N YES Y/N NO or or Select "Yes" to reset to the factory defaults. (Remote control unit) NOTE: • When making parameter settings, the display will return to the regular condition several seconds after the last button was pressed and the setting will be completed. Surround parameters q Pro Logic IIx and Pro Logic II Mode: • The Cinema mode is for use with stereo television shows and all programs encoded in Dolby Surround. • The Music mode is recommended as the standard mode for auto sound music systems (no video), and is optional for A/V systems. • The Pro Logic mode offers the same robust surround processing as original Pro Logic in case the source contents is not of optimum quality. • The Game mode for playing games.The game mode can only be used with 2-channel audio sources. Select one of the modes ("Cinema", "Music", "Pro Logic"or "Game"). Panorama Control: This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging. Select "OFF" or "ON". Dimension Control: This control gradually adjust the soundfield either towards the front or towards the rear. The control can be set in 7 steps from 0 to 6. Center Width Control: This control adjust the center image so it may be heard only from the center speaker; only from the left/right speakers as a phantom image; or from all three front speakers to varying degrees. The control can be set in 8 steps from 0 to 7. DTS NEO:6 Mode: • Cinema This mode is optimum for playing movies. Decoding is performed with emphasis on separation performance to achieve the same atmosphere with 2-channel sources as with 6.1-channel sources. This mode is effective for playing sources recorded in conventional surround formats as well, because the in-phase component is assigned mainly to the center channel (C) and the reversed phase component to the surround (SL, SR and SB channels). • Music This mode is suited mainly for playing music. The front channel (FL and FR) signals bypass the decoder and are played directly so there is no loss of sound quality, and the effect of the surround signals output from the center (C) and surround (SL, SR and SB) channels add a natural sense of expansion to the sound field. CENTER IMAGE (0.0 to 1.0: default 0.3): The center image parameter for adjusting the expansion of the center channel in the DTS NEO:6 MUSIC mode has been added. 44