Denon AVR-1905 Owners Manual
Denon AVR-1905 Manual
 |
View all Denon AVR-1905 manuals
Add to My Manuals
Save this manual to your list of manuals |
Denon AVR-1905 manual content summary:
- Denon AVR-1905 | Owners Manual - Page 1
AV SURROUND RECEIVER RÉCEPTEUR AUDIO-VIDÉO AVR-1905/785 OPERATING INSTRUCTIONS MODE D'EMPLOI FOR ENGLISH READERS PAGE 2 ~ PAGE to offer, read these instructions carefully and use the set properly. Be sure to keep this manual for future reference should any questions or problems arise. "SERIAL NO. - Denon AVR-1905 | Owners Manual - Page 2
RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the - Denon AVR-1905 | Owners Manual - Page 3
antenna or cable system is connected to the product, be power lines or other electric light or power circuits, or where instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls service or repairs to this product, ask the service - Denon AVR-1905 | Owners Manual - Page 4
Information 62 ~ 68 ⁄8 Troubleshooting 69 ⁄9 Specifications 70 List of Preset Codes 138 ~ 142 2 ACCESSORIES Check that the following parts are included in addition to the main unit: q Operating instructions 1 w Warranty 1 e Service station list 1 r Remote control unit (RC-978 1 t R6P - Denon AVR-1905 | Owners Manual - Page 5
instructions may differ from the actual set for explanation purposes. • V. AUX terminal The AVR-1905/785 between the top, back and sides of control or connect components to the input jacks. • Muting of PRE OUT jacks, HEADPHONE jack and SPEAKER terminals The PRE OUT jacks, HEADPHONE jack and SPEAKER - Denon AVR-1905 | Owners Manual - Page 6
to 7.1 playback channels, including the surround back channel. Dolby Pro Logic IIx AVR-1905/785 is provided with 5.1 channel (five main channels, plus one low frequency effects channel) inputs, along with a full set of 7.1 channel pre-amp outputs, controlled by the 8 channel master volume control - Denon AVR-1905 | Owners Manual - Page 7
. To use Surround back with one speaker, connect the speaker to SURR. BACK L CH. AC CORD AC 120 V, 60 Hz R L R L OPTICAL COAXIAL OUTPUT CD player or other DIGITAL AUDIO component equipped with digital output jacks R LR L R LRL OUTPUT INPUT CD recorder or Tape deck B Connecting a tape deck - Denon AVR-1905 | Owners Manual - Page 8
cable can result in a drop in video quality. • When making connections, also refer to the operating instructions of the other components. • The AVR-1905/785 is equipped with a function for up-converting video signals. • The signal connected to the video signal terminal is output to the S-Video and - Denon AVR-1905 | Owners Manual - Page 9
with S-Video jacks • When making connections, also refer to the operating instructions of the other components. • A note on the S input jacks The input selectors for the S inputs and Video inputs work in conjunction with each other. • The AVR-1905/785 is equipped with a function for converting - Denon AVR-1905 | Owners Manual - Page 10
be changed at the system setup. For details, see " instructions included with the TV or other component. The Video Conversion Function With the AVR-1905/785 connect the AVR1905/785 with a TV (or monitor, projector, etc.) and the video (yellow) or S-Video terminals are used to connect the AVR-1905/785 - Denon AVR-1905 | Owners Manual - Page 11
a wall. Bend in the reverse direction. Installation hole Mount on wall, etc. GROUND An F-type FM antenna cable plug can be connected directly. Connection of AM antennas 1. Push the lever. 2. Insert the conductor. 3. Return the lever. Note to CATV system installer: This reminder is provided - Denon AVR-1905 | Owners Manual - Page 12
or other future multi-channel sound format decoder. • When making connections, also refer to the operating instructions of the other components. R L R L Front Surround Subwoofer Center Decoder with 6-channel analog output For instructions on playback using the external input (EXT. IN) jacks, see - Denon AVR-1905 | Owners Manual - Page 13
-main (integrated) amplifier is connected, the ZONE2 output terminals can be used to play a different program source in ZONE2 the same time. • ZONE2 SPEAKER OUT can be used when "ZONE2" is selected at System Setup Menu "Power Amp Assign". In this case , Surround Back Speaker OUT cannot be used for - Denon AVR-1905 | Owners Manual - Page 14
around the unit and switch the power back on. If the protection circuit is activated again even though there are no problems with the wiring or the ventilation around the unit, switch off the power and contact a DENON service center. Note on speaker impedance • The protector circuit may be activated - Denon AVR-1905 | Owners Manual - Page 15
, also refer to the operating instructions of the other components. Connection jack for subwoofer with built-in amplifier (super woofer), etc. SURROUND BACK/MULTI ZONE SPEAKER SYSTEMS NOTES: • To use Surround back with one speaker, connect the speaker to SURR. BACK L CH. • The settings must be - Denon AVR-1905 | Owners Manual - Page 16
r Headphones jack (PHONES 40) t INPUT MODE button 37, 39) y SPEAKER A/B buttons 36, 61) u SURROUND BACK button 51) i EXT. IN button 37, 39) o BAND button 59) 38) @9 SIGNAL indicators 38) #0 ANALOG button 37, 39) #1 Remote control sensor 18) #2 ZONE2/REC SELECT button 41, 44) #3 FUNCTION - Denon AVR-1905 | Owners Manual - Page 17
31, 33, 34, 59) Mode selector switches 31~33, 35) Master volume control buttons 38) MUTING button 40) SURROUND PARAMETER/SYSTEM button 33, 34, 47) CH SELECT (channel select)/ ENTER button 19, 33, 34, 46, 48) SURROUND BACK/RETURN button 33, 34, 51) SPEAKER button 36) DIMMER button 41) 17 - Denon AVR-1905 | Owners Manual - Page 18
distance will shorten or operation will become difficult if there are obstacles between the remote control unit and the remote control sensor, if the remote control sensor is exposed to direct sunlight or other strong light, or if operated from an angle. • Neon signs or other devices emitting pulse - Denon AVR-1905 | Owners Manual - Page 19
In SW Level = +15 dB Power AMP Assignment On Screen Display Set this to switch the surround back channel's power amplifier for use for Zone 2. This sets whether or not to display the on-screen display that appears on the monitor screen when the controls on the remote control unit or main unit are - Denon AVR-1905 | Owners Manual - Page 20
30.) • The AVR-1905/785's on-screen display function is designed for use with high resolution monitor TVs, so it may be difficult to read small characters on TVs with small screens or low resolutions. • The setup menu is not displayed when headphone are being used. 2 Speaker system layout Basic - Denon AVR-1905 | Owners Manual - Page 21
SET UP NOTE: Please make sure the "AUDIO" position of the slide switch on the remote control unit. 5 Press the ENTER or (down) button to switch to the Speaker Configuration set up. NOTE: Press the SYSTEM SETUP button again to finish system set up. System set up can be finished at any time - Denon AVR-1905 | Owners Manual - Page 22
actually being used. 1 Set whether or not speakers are connected and, if so, their size parameters. Front Sp. Center Sp. Front Sp. • To select the speaker Subwoofer Listening position Surround Sp. Surround Sp. Surround back Sp. • To select the parameter 1 FRONT LARGE 2 Press the - Denon AVR-1905 | Owners Manual - Page 23
less. FL Center FR Subwoofer L1 L2 L5 Listening position SL L3 SBL L4 SR SBR NOTES: • No setting when "None" has been selected for the Speaker Configuration setting. • Surround back is not displayed when ZONE 2 is set with the POWER AMP ASSIGN setting. 1 Select the speaker to be set - Denon AVR-1905 | Owners Manual - Page 24
frequency signal range of channels set to "SMALL" in the setup. The low frequency signal range of channels set to "LARGE" are produced from those channels. - Crossover Frequency - • When "Subwoofer" is set to "Yes" at the "Speaker Configuration Setting", set the frequency (Hz) below which the bass - Denon AVR-1905 | Owners Manual - Page 25
the speakers to adjust the level. • The level can also be adjusted directly from the remote control unit produced automatically from the different speakers. • Manual: Select the speaker from which you want When the surround back speaker setting is set to "1spkr" for "Speaker Configuration", this - Denon AVR-1905 | Owners Manual - Page 26
modes: DIRECT, STEREO, STANDARD (DOLBY/DTS SURROUND), 5/7 CH STEREO, MONO MOVIE, ROCK ARENA, JAZZ CLUB, VIDEO GAME, MATRIX and VIRTUAL. Setting the Digital In Assignment • This setting assigns the digital input jacks of the AVR-1905/785 for the different input sources. 1 Select the digital - Denon AVR-1905 | Owners Manual - Page 27
input signal). 3 Press the ENTER or (down) button to switch the Auto Surround Mode setting. AUTO: When there are multiple input signals, the input signals are no input signal to the component terminal. S-Video: The signal connected to the S-Video terminal is always played. The S-Video input - Denon AVR-1905 | Owners Manual - Page 28
other multichannel format Dolby or DTS Surround 1 Select "ON" if you want to use the auto surround mode, "OFF" if you connected to the Ext. In terminal. 1 Select desired setting. • Select according to the specifications of the player being used. Also refer to the player's operating instructions - Denon AVR-1905 | Owners Manual - Page 29
. • If ZONE2 is selected, the signal that selected at ZONE2 is output at "SURR. BACK/ZONE2" PREOUT terminals. 1 Select "Surround Back" to use as the surround back channel, "Zone2" to use as Zone 2 out. 26 AMP S.BACK 2 Press the ENTER or (down) button to switch the On Screen Display setting - Denon AVR-1905 | Owners Manual - Page 30
This completes the system setup operations. Once the system is set up, there is no need to make the settings again unless other components or speakers are connected to or the speaker layout is changed. • On-screen display signals Signals input to the AVR-1905/785 On-screen display signal output - Denon AVR-1905 | Owners Manual - Page 31
's operating instructions. While this remote control is compatible with a wide range of infrared controlled components, some models of components may not be operated with this remote control. 1. CD player (CD) and CD recorder and MD recorder (CDR/MD) system buttons 2. Tape deck (TAPE) system - Denon AVR-1905 | Owners Manual - Page 32
one type of remote control code. Refer to the included list of preset codes to change the number and check. • The preset memory can be set for one component only among the following: CDR/MD, DVD/VDP and DBS/CABLE. The preset codes are as follows upon shipment from the factory and after resetting: TV - Denon AVR-1905 | Owners Manual - Page 33
VIDEO". Set the AUDIO side for the CD, tape deck or CDR/MD 3 position, to the VIDEO side for instructions. Some models cannot be operated with this remote control unit. 1. Digital video disc player (DVD) system buttons POWER : Power on/standby (ON/SOURCE) OFF : DENON DVD Power off 6,7 : Manual - Denon AVR-1905 | Owners Manual - Page 34
deck (VCR) system buttons POWER : Power on/standby (ON/SOURCE) 6,7 : Manual search (forward and reverse) 2 : Stop 1 : Play 3 : Pause down +, - NOTES: • For this CD, CDR, MD and TAPE components, buttons can be operated in the same way as for Denon audio components (page 31). • The TV can - Denon AVR-1905 | Owners Manual - Page 35
allowing you to operate the PLAY, STOP, MANUAL SEARCH and AUTO SEARCH buttons on the CD, TAPE, CDR/MD, DVD/VDP or VCR components when in Indicator flash. 4 1 2 3 4 5 6 7 8 9 0 Input the number of the component you want to set. (See Table 1) Table 1 No. CD 1 TAPE 2 CDR/MD - Denon AVR-1905 | Owners Manual - Page 36
(Remote control unit) When pressed, the power turns on and the display lights. The sound is muted for several seconds, after which the unit operates normally. When pressed again, the power turns off, the standby mode is set and the display turns off. 3 Select the front speakers. Press the SPEAKER - Denon AVR-1905 | Owners Manual - Page 37
button is pressed. AUTO PCM DTS INPUT MODE (Main unit) (Remote control unit) 2 Input mode selection function Different input modes can be the selected input source are detected and the program in the AVR-1905/785's surround decoder is selected automatically upon playback. This mode can be - Denon AVR-1905 | Owners Manual - Page 38
parameters, tone defeat or tone control, press the surround mode button then operate the selector. (Remote control unit) SURROUND MODE (Main unit) 4 Start playback on the selected component. • For operating instructions, refer to the component's manual. 5 Adjust the volume. MASTER VOLUME - Denon AVR-1905 | Owners Manual - Page 39
select the input source to which the video signal is connected, then set this mode. • If the subwoofer output level seems to high, set the "SW ATT." surround parameter to "ON". Playing audio sources (CDs and DVDs) The AVR-1905/785 is equipped with two 2-channel playback modes exclusively for music - Denon AVR-1905 | Owners Manual - Page 40
jack. Connect the headphones to the PHONES jack. The pre-out output (including the speaker output) is automatically turned off when headphones are connected. PHONES Switch the program source to the component connected to the video (Remote control unit) input jacks. 40 1 1 1 Display IN - Denon AVR-1905 | Owners Manual - Page 41
the display connected to the unit's VIDEO MONITOR OUT jack. Also, the unit's operating status can be checked during playback by pressing the remote (Remote control unit) control unit's ON SCREEN/DISPLAY button. Such information as the position of the input selector and the surround parameter - Denon AVR-1905 | Owners Manual - Page 42
OUT can be used when "ZONE2" is selected at System Setup Menu "Power Amp Assignment". In this case, Surround Back Speaker Out cannot be used for MAIN ZONE. • When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the main zone and zone2, the - Denon AVR-1905 | Owners Manual - Page 43
C This unit FR SW ZONE2 SPEAKER OUT ZONE 2 RC-617 SL RC-616 SR SYSTEM REMOTE CONTROL UNIT RC-978 PROGRAMMABLE REMOTE CONTROL UNIT ROOM-TO-ROOM REMOTE CONTROL SYSTEM (separately sold) control line MULTI SOURCE AUDIO signal cable SPEAKER cable * Refer to CONNECTIONS on pages 7 to 15. 43 - Denon AVR-1905 | Owners Manual - Page 44
and CDR/TAPE recording output terminals. • Digital signals are not output to the ZONE2 output jacks. [2] Remote control unit operations during multi-source playback (selecting the source) 1 Set the slide switch to "AUDIO" and "ZONE2". 2 OUTPUT SURROUND BACK ZONE 2 (Light) (Remote control - Denon AVR-1905 | Owners Manual - Page 45
playing with the surround function, be sure to use the test tones to adjust the playback level from the different speakers. This adjustment can be performed with the system setup (see page 19) or from the remote control unit, as described below. • Adjusting with the remote control unit using the - Denon AVR-1905 | Owners Manual - Page 46
SW SL When the surround back speaker setting is set to "1sp" for "Speaker Configuration", this is set to "SB". "SB" appears only when "POWER AMP ASSIGN" setting is SURR. BACK mode. NOTE: Please make sure the "AUDIO" position of the slide switch on the remote control unit. 2 Adjust the level - Denon AVR-1905 | Owners Manual - Page 47
at the Speaker Configuration setting to "1Sp" or "2Sp". To play in the PL IIx mode, set "Surround Back" at the Power Amp Assign setting. ENGLISH 1 2 4, 6 5, 7 1 Select the function to which the component you want to play is connected. Example: DVD FUNCTION (Main unit) (Remote control unit - Denon AVR-1905 | Owners Manual - Page 48
". (Set "S. BACK" at system set up to SELECT "SMALL" or "LARGE".) (Main unit) (Remote control unit) (Pro Logic SURROUND PARAMETER (Main unit) (Remote control unit) (Remote control unit) 7 SELECT Set the various surround parameters. (Main unit) (Remote control unit) 8 When the surround - Denon AVR-1905 | Owners Manual - Page 49
connected. Example: DVD FUNCTION (Main unit) 2 Select the DTS NEO:6 mode. STANDARD (Remote control unit) 2 1 9 5, 7 (Main unit) (Remote control source. 4 Select the surround parameter mode. Display SURROUND PARAMETER MODE cinema (Main unit) (Remote control unit) ENGLISH The DTS - Denon AVR-1905 | Owners Manual - Page 50
SURROUND PARAMETER (Main unit) (Remote control unit) (Remote control unit) 7 Set the various surround parameters. SELECT (Main unit) (Remote control unit) 8 When the surround "Game"). Panorama Control: This mode extends the front stereo image to include the surround speakers for an exciting - Denon AVR-1905 | Owners Manual - Page 51
Dolby Pro Logic IIx or DTS NEO:6. SURROUND MODE SELECT (Main unit) (Main unit) 3 Operate the SURROUND BACK button to switch Surround Back CH ON/OFF. SURROUND BACK SURROUND BACK Light (Main unit) (Remote control unit) • Lights when the SURROUND BACK button is on. 4 Play a program source - Denon AVR-1905 | Owners Manual - Page 52
5 Display the surround parameter menu. SURROUND PARAMETER (Main unit) (Remote control unit) 6 Select the various parameters. SURROUND PARAMETER (Main unit) (Remote control unit) (Remote control unit) 7 Adjust the parameter settings. SELECT (Main unit) (Remote control unit) 8 Press - Denon AVR-1905 | Owners Manual - Page 53
playback. TONE: This adjusts the tone control. This can be set individually for the separate shroud mode other than Pure direct and direct mode. SB CH OUT (Surround Back): (1) (Multi channel source) "OFF Playback is conducted without using the surround back speaker. "NON MTRX"......The same signals - Denon AVR-1905 | Owners Manual - Page 54
surround and surround back signal left channels, the front right channel signals are output to the surround and surround back surround channel. Select this mode to enjoy a virtual sound field, produced from the front 2-channel speakers surround parameters, tone control settings and playback level balance - Denon AVR-1905 | Owners Manual - Page 55
for the different surround modes. (Remote control unit) 3 Select the various parameters. 3 2, 3 4 3 (Remote control unit) (Remote control unit) 4 Adjust the parameter settings. (Remote control unit) 5 Press the ENTER button to finish surround parameter mode. (Remote control unit) NOTE - Denon AVR-1905 | Owners Manual - Page 56
ROCK ARENA To select the surround mode while adjusting the surround parameters, tone defeat or tone control, press the SURROUND MODE button then operate the selector. SURROUND MODE (Main unit) 2 Press the SURROUND PARAMETER button. Press and hold in the surround parameter button to select the - Denon AVR-1905 | Owners Manual - Page 57
SURROUND L/R E E B B B B B B B B B B B B E SURROUND BACK L/R E E B B B B B B B B B B B B E SUBWOOFER B B B B B B B B B B B B B B B When playing Dolby Digital signals C C E C * C * C * C E C C C C C C C C : Signal / Adjustable E : No signal B : Turned on or off by speaker C E TONE CONTROL E C (0 - Denon AVR-1905 | Owners Manual - Page 58
memory. The "Auto tuner preset" operation can also be performed at "System setup". (See page 30.) 1 1 When the main unit's power operation switch due to poor reception, use the "Manual tuning" operation to tune in the station, then preset it using the manual "Preset memory" operation. • To - Denon AVR-1905 | Owners Manual - Page 59
lights on the display when a stereo broadcast is tuned in. At open frequencies, the noise is muted and the "TUNED" and "STEREO" indicators turn off. Lit (Remote control unit) Manual NOTE: • When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the "STEREO" indicator turns - Denon AVR-1905 | Owners Manual - Page 60
ENGLISH Preset stations 23 3 1, 4 2 Preparations: Use the "Auto tuning" or "Manual tuning" operation to tune in the station to be preset in the memory. 1 Press the MEMORY button. (Remote control unit) 2 Press the SHIFT button and select the desired memory block (A to G). SHIFT (Main unit) - Denon AVR-1905 | Owners Manual - Page 61
SHIFT (Main unit) (Remote control unit) NOTE: Please make sure the "AUDIO" position of the slide switch on the remote control unit. 2 Watching Hold the following SPEAKER A button and B button, and turn the main unit's power switch. 3 Check that the entire display is flashing with an interval - Denon AVR-1905 | Owners Manual - Page 62
types of sources thus have different properties, and different speaker settings, particularly for the surround speakers, are required in order to achieve the ideal sound. The AVR-1905/785 is equipped the function of surround speakers selection that makes it possible to change the settings according - Denon AVR-1905 | Owners Manual - Page 63
2- to 5.1-channel sources. Furthermore, all the Denon original surround modes (see page 54) are compatible with 7.1-channel playback, so you can enjoy 7.1-channel sound with any signal source. 2 Number of surround back speakers Though the surround back channel only consists of 1 channel of playback - Denon AVR-1905 | Owners Manual - Page 64
the listening position than the front speakers. • Consult the owner's manual for your subwoofer for advice on placing Surround speaker Surround back speaker Front speaker Point slightly downwards the subwoofer within the listening room. • If the surround speakers are direct-radiating (monopolar - Denon AVR-1905 | Owners Manual - Page 65
jack. Please refer to the instruction manual of the adapter when making connection. 2 Some DVD digital outputs have the function of switching the Dolby Digital signal output method between "bit stream" and "(convert to) PCM". When playing in Dolby Digital surround on the AVR-1905/785, switch the DVD - Denon AVR-1905 | Owners Manual - Page 66
of these signals is input to the AVR-1905/785, the surround mode is automatically set to Dolby Pro Logic II when the "DOLBY/DTS SURROUND" mode is selected. 2 Sources recorded in Dolby Surround are indicated with the logo mark shown below. Dolby Surround support mark: Manufactured under license from - Denon AVR-1905 | Owners Manual - Page 67
surround channels (FL, FR, C, SL, SR and LFE), DTS-ES Extended Surround also offers the SB (Surround Back, sometimes also referred to as "surround center") channel for surround 6.1 mode must be set manually to play these sources. (For instructions on selecting the surround mode, see page 51.) The - Denon AVR-1905 | Owners Manual - Page 68
/24 has a resolution of 24 bits, resulting in the same frequency band and dynamic range as 96 kHz/24 bit PCM. As with conventional DTS Surround, DTS 96/24 is compatible with a maximum of 5.1 channels, so sources recorded using DTS 96/24 can be played in high sampling frequency, multiple channel - Denon AVR-1905 | Owners Manual - Page 69
ENGLISH 18 TROUBLESHOOTING If a problem should arise,first check the following. 1. Are the connections correct ? 2. Have you operated the receiver according to the Operating Instructions ? 3. Are the speakers, turntable and other components operating property ? If this unit is not operating - Denon AVR-1905 | Owners Manual - Page 70
Receiving Range: Usable Sensitivity: 50 dB Quieting Sensitivity: S/N (IHF-A): Total Harmonic Distortion (at 1 kHz): 2 General Power supply: Power consumption: Maximum external dimensions: Mass: 2 Remote control Surround, Surr.Back red) specifications and design are subject to change without notice. 70 - Denon AVR-1905 | Owners Manual - Page 71
LIST OF PRESET CODES / LISTE DE CODES PRÉRÉGLÉS DVD Denon Aiwa Hitachi JVC Konka Magnavox Mitsubishi Panasonic Philips Pioneer Sanyo Sony Toshiba Zenith 014, *[111] 009 010 006, 011 012, 013 005 004 014 005, 015, 016, 017 003, 008 018 002, 019, 020 001, 021, 022 023 VDP Denon Magnavox Mitsubishi - Denon AVR-1905 | Owners Manual - Page 72
Minolta 013, 023 Mitsubishi 001, 003, 008, 013, 014, 017, 027, 029, 039, 040, 041, 045, 097 Motorola 081 Montgomery Ward 001, 002, 007, 009, 049, 063, 081, 115, 117 MTC 009, 087, 094 Multitech 007, 009, 011, 087, 090, 094 NAD 038 NEC 004, 005, 006, 018, 026, 029, 045, 061, 062, 085 - Denon AVR-1905 | Owners Manual - Page 73
, 127, 131, 132, 145, 147 Philips 005, 015, 017, 050, 051, 056, 078, 087, 088, 089, 131, 132, 147 Pioneer 124, 128, 142 Portland 054 Price Club 095 Proscan 040, 044, 125 Proton 035, 051, 092, 129 Pulsar 042 Quasar 036, 037, 074, 141 Radio Shack 011, 044, 063, 093, 118 - Denon AVR-1905 | Owners Manual - Page 74
Samsung Sansui Sanyo SBR Schneider Scott Sears Sharp Siemens Signature Simpson Sony Soundesign Spectricon Squareview Supre-Macy Supreme Sylvania Symphonic Tandy Tatung Technics Teknika Tera Toshiba Universal Victor Video Concepts Viking Wards Zenith Zonda 003, 015, 034, 053, 055, 057, 094, 095, 136 - Denon AVR-1905 | Owners Manual - Page 75
Wards Yamaha Zenith CDR Denon Philips MD Denon Kenwood Onkyo Sharp 113 003, 004 007 005 006 142 TAPE Denon Aiwa Carver Harman/Kardon JVC Kenwood Magnavox codes set upon shipment from the factory. *[ ] : Les codes préréglés diffèrent en fonctiom des livraison de l'usine. DVD preset codes Codes - Denon AVR-1905 | Owners Manual - Page 76
MEMO: 143 - Denon AVR-1905 | Owners Manual - Page 77
TOKYO, JAPAN www.denon.com Printed in China 511 4178 001
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
 |
 |
2
We greatly appreciate your purchase of this unit.
2
To be sure you take maximum advantage of all the
features this unit has to offer, read these instructions
carefully and use the set properly. Be sure to keep this
manual for future reference should any questions or
problems arise.
“SERIAL NO.
PLEASE RECORD UNIT SERIAL NUMBER ATTACHED TO
THE REAR OF THE CABINET FOR FUTURE REFERENCE”
“NO. DE SERIE
PRIERE DE NOTER LE NUMERO DE SERIE DE L’APPAREIL
INSCRIT A L’ARRIERE DU COFFRET DE FAÇON A POUVOIR
LE CONSULTER EN CAS DE PROBLEME.”
2
Nous vous remercions pour l’achat de cet appareil.
2
Pour être sûr de profiter au maximum de toutes les
caractéristiques qu’offre cet appareil, lire avec soin ces
instructions et bien utiliser l’appareil. Toujours
conserver ce mode d’emploi pour s’y référer
ultérieurement en cas de question ou de problème.
FOR ENGLISH READERS
PAGE
2
~
PAGE
70, 138 ~ 142
POUR LES LECTEURS FRANCAIS
PAGE
2, 71
~
PAGE
142
AV SURROUND RECEIVER
RÉCEPTEUR AUDIO-VIDÉO
AVR-1905/785
OPERATING INSTRUCTIONS
MODE D’EMPLOI