Denon AVR-1912 Owners Manual - Page 54
Connect, 1-channel Surround back speaker connection - back panel
UPC - 883795001984
View all Denon AVR-1912 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Connect • For the method of connecting 5.1-channel speakers, see C page 6 "Connecting the speakers". • For the method of connecting the TV, see C page 3 "Connect this unit to the television using an HDMI cable (sold separately)". 7.1-channel (Surround back speaker) connection The illustration on the right shows a connection example for performing 7.1-channel playback using the surround back speakers. If you connect the surround back and front height speakers before you start playback, the audio is played back by automatically switching the speakers in accordance with the surround mode or input signals. To perform 7.1-channel playback using the surround back speakers, set "Amp Assign" to "NORMAL" in steps 3 and 4 for "Set up "Amp Assign"" (vpage 56). NOTE • For speaker cable connections, see C page 6 "Connecting the speakers". • Connect so that the speaker cable core wires do not protrude from the speaker terminal. The protection circuit may be activated if the core wires touch the rear panel or if the + and - sides touch each other (vpage 120 "Protection Circuit"). • Never touch the speaker terminals while the power supply is connected. Doing so could result in electric shock (When the Setup wizard is running, follow the instructions in the Setup wizard screen for making connections.). • Use speakers with the speaker impedances shown below. Speaker terminals FRONT CENTER SURROUND SURR. BACK / AMP ASSIGN Speaker impedance 6 - 16 Ω 51 FL SW FR C SL SR SBL SBR Information Advanced version Basic version