Denon AVR-1912 Owners Manual - Page 81
Audyssey Settings, Setting items, Setting details, Tone Control, 6dB - +6dB, Treble
UPC - 883795001984
View all Denon AVR-1912 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Basic version Advanced version Tone Adjust the tonal quality of the sound. Setting items Setting details Tone Control ON : Allow tone adjustment (bass, treble). Set the tone control function OFF : Playback without tone adjustment. to ON and OFF. "Tone Control" can be set when "Dynamic EQ®" (vpage 79) is set to "OFF". NOTE • "Tone Control" settings are not reflected to ZONE2. • The tone cannot be adjusted in the "DIRECT" mode. Bass -6dB - +6dB Adjust low frequency range (bass). "Bass" can be set when "Tone Control" is set to "ON". Treble -6dB - +6dB Adjust high frequency range (treble). "Treble" can be set when "Tone Control" is set to "ON". Audio Adjust Audyssey Settings Default settings are underlined. Set Audyssey MultEQ®, Audyssey Dynamic EQ® and Audyssey Dynamic Volume®. These can be selected after Audyssey® Auto Setup has been performed. For additional information on Audyssey technology, please see page 119. NOTE • If you have not performed Auto Setup, or if you change the speaker settings after performing Auto Setup, you may not be able to select Dynamic EQ®/Dynamic Volume®. In this case, either perform Audyssey® Auto Setup over again or perform "Restore" (vpage 19) to return to the settings after Audyssey® Auto Setup was run. • When HD Audio for which the sampling frequency exceeds 96 kHz is played back, the "Audyssey Settings" cannot be set. Setting items Setting details MultEQ® Audyssey : Optimize the frequency response of all speakers. MultEQ® corrects both time Audyssey Byp.L/R : Optimize frequency response of speakers except and frequency response front L and R speakers. problems in the listening area based on Audyssey® Auto Setup calibration. We recommend "Audyssey". MultEQ® is the prerequisite function for Dynamic EQ® and Dynamic Volume®. Audyssey Flat : Optimize frequency response of all speakers to flat response. Manual : Apply frequency response set with "Manual EQ" (vpage 79). OFF : Turn "MultEQ®" equalizer off. • "Audyssey", "Audyssey Byp. L/R" and "Audyssey Flat" can be selected after Audyssey® Auto Setup has been performed. "Audyssey" is automatically selected after performing Audyssey® Auto Setup. When "Audyssey", "Audyssey Byp. L/R" or "Audyssey Flat" is selected, illuminates. • After running Audyssey® Auto Setup, if the Speaker Configuration, Distance, Channel Level, and Crossover Frequency have changed without increasing the number of speakers measured, only illuminates. NOTE • "MultEQ®" and "Manual" cannot be selected when "EQ Customize" is set to "Not Used" (vpage 87). • When using headphones, "MultEQ®" is automatically set to "OFF". "MultEQ®", "Dynamic EQ®" and "Dynamic Volume®" settings are stored for each input source. vSee overleaf Information BD 78