Denon AVR-1912 Owners Manual - Page 86
Speaker Setup, Speaker Config.
UPC - 883795001984
View all Denon AVR-1912 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Basic version Advanced version Speaker Setup Default settings are underlined. Perform when setting the speakers manually or when changing settings made in Audyssey® Auto Setup. • If you change the speaker settings after performing Audyssey® Auto Setup, it will not be possible to select Audyssey MultEQ®, Audyssey Dynamic EQ® and Audyssey Dynamic Volume® (vpage 78, 79). • "System Setup" can be used without changing the settings. Please set if necessary. Setting items Setting details Amp Assign The signal output from the SURR.BACK/AMP ASSIGN speaker terminal of this unit can be switched to match your speaker environment. NORMAL : Select the "NORMAL" setting to perform 7.1-channel playback using the surround back. ZONE2 : Select the "ZONE2" setting to assign the unit's built-in power amplifier for ZONE2 and output the audio in stereo. Bi-AMP : Select the "Bi-AMP" setting to connect the front speakers via the bi-amp connection. Front B : Select the "Front B" setting to use the second set of front speakers for playback. You can switch the front speakers A and B to be used for playback in accordance with the 2-channel playback or multichannel playback mode. When you select this Front B setting, also perform the "Front Sp Setup" (vpage 85) procedure. F.HEIGHT : Select the "F.HEIGHT" setting to use the front height speaker for playback. Speaker Config. Front : Set the front speaker size. Select speaker configuration • Large : Use a large speaker that can adequately play back low and size (bass reproduction frequencies. capability). • Small : Use a small speaker that has inadequate playback capacity for NOTE low frequencies. Do not use the outward shape of the speaker to • When "Subwoofer" is set to "No", "Front" is automatically set to determine selection of a "Large". "Large" or "Small" speaker. • When "Front" is set to "Small", "Center", "Surround", "S.Back" and Instead, use the frequencies "F.Height" can not be set to "Large". set in "Crossover Freq." Center : Set the presence and size of the center speaker. (vpage 85) as the • Large : Use a large speaker that can adequately play back low standard for determining frequencies. bass reproduction capability. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when a center speaker is not connected. "Large" is not displayed when "Front" is set to "Small". Setting items Speaker Config. (Continued) System Setup Setting details Subwoofer : Set the presence of a subwoofer. • Yes : Use a subwoofer. • No : Select when a subwoofer is not connected. When "Front" is set to "Small", "Subwoofer" is automatically set to "Yes". Surround : Set the presence and size of the surround speakers. • Large : Use a large speaker that can adequately play back low frequencies. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the surround speakers are not connected. • When "Surround" is set to "Large", "S.Back" and "F.Height" can be set to "Large". • When "Surround" is set to "None", "S.Back" and "F.Height" are automatically set to "None". S.Back : Set the presence, size and number of surround back speakers. • Large : Use a large speaker that can adequately play back low frequencies. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the surround back speakers are not connected. • 2spkrs : Use two surround back speakers. • 1spkr : Use only one surround back speaker. When you select this setting, connect the surround back speaker to the left (L) channel. Even when the "S.Back" setting is other than "None", sound may not be emitted from the surround back speaker, depending on the playback source. In this case, make "Surr.Parameter" - "S.Back" setting other than "OFF" (vpage 77). NOTE When "Amp Assign" setting (vpage 83) is "NORMAL", you can make the "S.Back" setting. vSee overleaf Information BD 83