Denon AVR 2807 Owners Manual - English - Page 43

Advanced Operation Playing the iPod® The music recorded on the iPod can be played when using a DENON original Control Dock for iPod (ASD-1R). The iPod can be controlled using the buttons on the main unit and the remote iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. With the iPod, non-copyrighted contents and contents that may be legally reproduced or played may be reproduced and played by individuals for their personal use. Violating copyrights is prohibited by law. 1 Connect the AVR-2807 and iPod using the DENON original Control Dock for iPod ( page 21). 2 Assign the input terminal at "Setting the iPod Assignment" ( page 47). 3 Use FUNCTION to select the function assigned in step 2. (iPod screen) If the screens above are not displayed, the iPod may not be properly connected. Check the connections and settings. • The optional standard Control Dock for iPod is DENON ASD-1R sold separately. Listening to music 1 Press D H to select the music file, then press ENTER or G. Press F to return to the music menu screen. 2 Press ENTER or G. • Playback starts. Pause: Press ENTER during playback. Press again to resume. Manual search: Press and hold in D H during playback. • D : Fast reverse • H : Fast forward Track search: Press D H during playback. • D : Move to beginning of previous track • H : Move to beginning of next track Stop: Press ENTER for at least 2 seconds during playback. Repeat play: Press [MODE]. The mode switches as follows each time [MODE] is pressed. • RPT One: Single track repeat • RPT All : All track repeat Shuffle play: Press [MEMORY]. The mode switches as follows each time [MEMORY] is pressed. • SFL Songs : Single track shuffle • SFL Albums: Album shuffle The mode switches between the Browse mode and the Remote mode if [MODE] is pressed for at least 2 seconds. In the Remote mode, only D H F G and ENTER can be used. NOTE: • DENON will accept no responsibility whatsoever for loss or damage of data on an iPod occurring when the iPod is used connected to the AVR-2807. • Some of the functions may not operate, depending on the type of iPod and the software version. 39 Advanced Operation • When is pressed during playback, the front panel display switches between the title name, artist name and album name. • Depending on the iPod's software version, it may not be possible to operate the iPod from the AVR-2807. Use the latest version of the software. Information on the latest version of the software can be obtained on the Apple Computer website. • If you do not want the on screen display to be displayed while playing the iPod, set "Function/Mode Status" at "Setting the On Screen Display" to "OFF" ( page 52). • With the AVR-2807 it is possible to display folder names and file names on the screen like titles. The AVR-2807 can display up to 64 characters, consisting of numbers, capital letters and small letters. A "?" mark is displayed in place of non-compatible characters. Viewing still pictures and videos (only for iPods equipped with the slideshow / video function) Use this procedure to view photo and video data stored on the iPod on a monitor. 1 Press [MODE] for at least 2 seconds to switch from the Browse mode to the Remote mode. • "Remote iPod" is displayed on the AVR-2807's display. 2 Watching the iPod's screen, press D H to select "Photos" or "Video", then press ENTER or G. • The iPod's photo and video data are displayed on the monitor. • To output photo or video data recorded on the iPod to the monitor, the iPod's "TV Out" setting (under "Video Settings") must be set to "ON". For details, refer to the iPod's operating instructions. Disconnecting the iPod Press and set the AVR-2807's power to the standby mode. The iPod can be disconnected after switching to a function other than the one to which the iPod input is assigned.