Denon AVR 2807 Owners Manual - English - Page 47

Advanced Setup - Part 1 System setup items and default values 1. Auto Setup/Room EQ 1 Auto Setup 2 Room EQ Setup 3 Direct Mode Setup 4 Mic Input Select Items This unit performs an analysis of the speaker system and measures the acoustic characteristics of your room to permit an appropriate automatic setting. Set the Room Equalizer setting with "All" or "Assign" for each surround mode. Set the ON/OFF setting of Room Equalizer, in the case of the surround mode is in "Direct" or "Pure Direct". Sets whether the setup microphone is connected to the pin jack (V. AUX L channel) or mIni jack (SETUP MIC). Advanced Setup - Part 1 Default settings - All, Room EQ = OFF OFF Mic Page 9 ~ 12 60 60 61 2. Speaker Setup 1 Speaker Config. 2 Subwoofer Setup 3 Distance 4 Channel Level 5 Crossover Frequency Items Automatically set the output component and properties for the various channels according to the combination of speakers to be actually used for surround playback. Front Sp. Large Select the method of playback of the subwoofer for playing the low bass signals. This parameter is for optimizing the timing with which the audio signals are produced from the speakers and subwoofer according to the listening position. Front L & R 12 ft (3.6 m) Set the volume of the various speakers so that the sound Front Front output from the speakers and the subwoofer seems to have L R the same volume level. 0 dB 0 dB Set the frequency (Hz) below which the bass sound of the various speakers is to be output from the subwoofer. Default settings Center Sp. Subwoofer Surround Sp. Small Yes Small Surround Back Sp. Small / 2spkrs LFE Center Subwoofer Surround L & R Surround Back 12 ft (3.6 m) 12 ft (3.6 m) 10 ft (3.0 m) 10 ft (3.0 m) Center Surround L Surround R Surround Back L Surround Back R Subwoofer 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 80 Hz Page 56, 57 57 57, 58 58, 59 59 43