Denon AVR 2807 Owners Manual - English - Page 74

Troubleshooting Symptom Cause Measures Page "NO SIGNAL" is • The signal cannot be received. displayed in the XM mode. • Reposition your XM Connect-and- 37 Play antenna. "OFF AIR" is displayed in the XM mode. • The selected channel currently broadcasting. is not • Select the another channel. 37 Receiving only XM • The XM Tuner is not activated. • Contact XM Radio. 37 channels 0 and 1. Specifications Specifications 2 Audio section • Power amplifier Rated output: Front (A, B): 110 W + 110 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) 140 W + 140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Center: 110 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) 140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Surround: 110 W + 110 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) 140 W + 140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Surround Back: 110 W + 110 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) 140 W + 140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Dynamic power: 120 W x 2 ch (8 Ω/ohms) 170 W x 2 ch (4 Ω/ohms) Output terminals: Front: A or B 6 ~ 16 Ω/ohms A + B 8 ~ 16 Ω/ohms Center, Surround, Surr. Back 6 ~ 16 Ω/ohms • Analog Input sensitivity / input impedance: 200 mV / 47 kΩ/kohms Frequency response: 10 Hz ~ 100 kHz: +0, -3 dB (DIRECT mode) S/N: 102 dB (DIRECT mode) Distortion: 0.005% (20 Hz ~ 20 kHz) (DIRECT mode) Rated output: 1.2 V • Digital D/A output: Rated output - 2 V (at 0 dB playback) Total harmonic distortion - 0.008 % (1 kHz, at 0 dB) S/N ratio - 102 dB Dynamic range - 96 dB Digital input: Format - Digital audio interface • Phono equalizer (PHONO input - REC OUT) Input sensitivity: 2.5 mV RIAA deviation: ±1 dB (20 Hz to 20 kHz) S/N: 74 dB (A weighting, with 5 mV input) Rated output / Maximum output: 150 mV / 8 V Distortion factor: 0.03% (1 kHz, 3 V) 2 Video section • Standard video terminals Input / output level and impedance: Frequency response: • S-Video terminals Input / output level and impedance: Frequency response: • Color component video terminal Input / output level and impedance: Frequency response: 1 Vp-p, 75 Ω/ohms 5 Hz ~ 10 MHz - +0, -3 dB Y (brightness) signal - 1 Vp-p, 75 Ω/ohms C (color) signal - 0.286 Vp-p, 75 Ω/ohms 5 Hz ~ 10 MHz - +0, -3 dB Y (brightness) signal - 1 Vp-p, 75 Ω/ohms PB/CB signal - 0.7 Vp-p, 75 Ω/ohms PR/CR signal - 0.7 Vp-p, 75 Ω/ohms 5 Hz ~ 100 MHz - +0, -3 dB 2 Tuner section Receiving Range: Usable Sensitivity: 50 dB Quieting Sensitivity: S/N (IHF-A): Total Harmonic Distortion (at 1 kHz): [FM] (note: µV at 75 Ω/ohms, 0 dBf = 1 x 10-15 W) 87.5 MHz ~ 107.9 MHz 1.0 µV (11.2 dBf) MONO 1.6 µV (15.3 dBf) STEREO 23 µV (38.5 dBf) MONO 77 dB STEREO 72 dB MONO 0.15% STEREO 0.3% [AM] 520 kHz ~ 1710 kHz 18 µV 2 General Power supply: Power consumption: Maximum external dimensions: Mass: AC 120 V, 60 Hz 6.0 A 1 W Max (Standby) 434 (W) x 171 (H) x 429 (D) mm (17-3/32" x 6-47/64" x 16-57/64") 14.0 kg (30 lbs 13.84 oz) 2 Remote control unit (RC-1030) Batteries: R6P/AA Type (3 batteries) External dimensions: 58 (W) x 230 (H) x 37 (D) mm (2-9/32" x 9-1/16" x 1-29/64") Mass: 230 g (Approx. 8.1 oz) (included batteries) * For purposes of improvement, specifications and design are subject to change without notice. 70