Denon AVR 4308CI Serial Protocol
Denon AVR 4308CI - AV Network Receiver Manual
 |
UPC - 081757508087
View all Denon AVR 4308CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Denon AVR 4308CI manual content summary:
- Denon AVR 4308CI | Serial Protocol - Page 1
DENON AVR control protocol Application model : AVR-4308 Application terminal: RS-232C/ Ethernet Ver. 5.1.0_a Connector specification Ⅰ. RS-232C of IPE,IPA for iPod Control. 3.Added Response MS Command for DTS Mode. 4.Corrected the Response Command of PSMODE. Page 24,42 25,43,44,45,46 31,32 33 - - Denon AVR 4308CI | Serial Protocol - Page 2
Ⅱ. Ethernet Connector type ： RJ-45(10BASE-T/100BASE-TX) Example ① Ethernet PC Cross cable AVR/AVC Example ② PC HUB Ethernet Straight cable Ethernet Straight cable AVR/AVC Communication format ： Communication system Communication speed Communication port Communication data length : A half - Denon AVR 4308CI | Serial Protocol - Page 3
Select "Manual Setup > Network Setup > Other > Power Saving" (3)Set parameters described below. "OFF"---Use this setting when using the AVR-4308 connected in a network. "ON"--- Use this setting when not using the AVR-4308 connected in a network. This setting is reducing the power consumption in the - Denon AVR 4308CI | Serial Protocol - Page 4
, AND carriage return (0x0D) --- It is used only as a pause sign. Command structure: COMMAND + PARAMETER + CR (0x0D) COMMAND: ASCII CODE of 2 characters Ex. SI : Select Input source MS : surround Mode Setting MV : Master Volume setting PW : system Power setting PARAMETER : ASCII CODE ( up to - Denon AVR 4308CI | Serial Protocol - Page 5
* is the meaning of 0x0D. SIDVD : Select Input source DVD MSSTEREO : surround Mode Set to STEREO MVUP : Master Volume UP PWON : system PoWer ON PWSTANDBY : system PoWer STANDBY SI? : Request command for now playing input source >> Return RESPONSE 'SI***' - 5 - - Denon AVR 4308CI | Serial Protocol - Page 6
receivable also during transmission of EVENT. B) Since CHANNEL VOLUME changes simultaneously when the SURROUND MODE changes, the value of the channel volume of all channels returns as EVENT. C) CHANNEL VOLUME returns the data of ALL channels step, only uses two ASCII characters as PARAMETER - Denon AVR 4308CI | Serial Protocol - Page 7
function example PW ON POWER ON/STANDBY change PWON - Denon AVR 4308CI | Serial Protocol - Page 8
---SURROUND BACKch (SBch 1SP) SB DOWN SB ** **:00 to 99 by ASCII , 50=0dB ? Return CV Status MU ON OUTPUT MUTE ON/OFF change OFF ? Return MU Status SI PHONO Select INPUT source CD TUNER DVD HDP TV/CBL SAT VCR DVR V.AUX NET/USB XM (North America model Only) HDRADIO (North - Denon AVR 4308CI | Serial Protocol - Page 9
:HDMI>>DIGITAL>>ANALOG) set force HDMI INPUT mode set force DIGITAL INPUT (Optical,Coaxial)mode set force ANALOG INPUT mode ---Set EXT.IN mode at AVR-4308 Return SD Status set DIGITAL INPUT AUTO mode set DIGITAL INPUT force PCM mode set DIGITAL INPUT force DTS mode Return DC Status VIDEO SELECT mode - Denon AVR 4308CI | Serial Protocol - Page 10
COMMAND MS VS PARAMETER function CLASSIC CONCERT MONO MOVIE MATRIX VIDEO GAME VIRTUAL ? QUICK1 QUICK2 QUICK3 QUICK1 MEMORY QUICK2 MEMORY QUICK3 MEMORY QUICK ? MONIAUTO MONI1 MONI2 MONI? ASPNRM ASPFUL ASP? SC48P SC10I SC72P SC10P SC AUTO SC? Return MS Status QUICK SELECT 1-3 MODE SELECT USER1-3 - Denon AVR 4308CI | Serial Protocol - Page 11
LR ROOM EQ:FLAT PSROOM EQ:FLAT ROOM EQ:MANUAL PSROOM EQ:MANUAL ROOM EQ:OFF PSROOM EQ:OFF ROOM EQ 0dB PSBAS DOWN ---AVR-4308 can be operated from -6 to +6(44 to 56) PSBAS 50 Return PSBAS Status PSBAS ? PS COMMAND : "*" parameter uses two ASCII characters. (see - Denon AVR 4308CI | Serial Protocol - Page 12
=0dB PSTRE DOWN TRE ** ---AVR-4308 can be operated from -6 to , 10=-10dB PSLFE DOWN LFE ** ---AVR-4308 can be operated from 0 to -10 10=10dB PSEFF DOWN EFF ** ---AVR-4308 can be operated from 1 to 15 300=300ms PSDEL DOWN DEL *** ---AVR-4308 can be operated from 0 to 300 - Denon AVR 4308CI | Serial Protocol - Page 13
DIM DOWN **:00 to 99 by ASCII , 00=0, PSDIM DOWN DIM ** ---AVR-4308 can be operated from 0 to 6 PSDIM ** DIM ? Return PSDIM Status PSDELAY DOWN DELAY *** ---AVR-4308 can be operated from 0 to 200 PSDELAY 200 PS COMMAND : "*" parameter uses two or three ASCII characters. ( - Denon AVR 4308CI | Serial Protocol - Page 14
UP HUE UP/DOWN , direct change to **dB HUE DOWN **:44 to 56 by ASCII , 50=0 HUE ** ---AVR-4308 can be operated from -6 to +6(44 to 56) HUE ? Return PSCN Status PV COMMAND : "*" parameter uses two ASCII characters. (see page4 J) section) example PSNIGHT OFF PSNIGHT LOW PSNIGHT MID - Denon AVR 4308CI | Serial Protocol - Page 15
PHONO | IPOD SOURCE UP DOWN ** ON OFF ? ON OFF ? ST MONO ? FL UP FL DOWN FL ** FR UP FR DOWN FR ** ? ON OFF ? function MULTI ZONE-2 mode set , and select source at AVR AVR-4308 Return Z2 Status ZONE2 OUTPUT MUTE ON/OFF change Return Z2MU Status ZONE2 Channel setting Return Z2CS Status ZONE2 CHANNEL - Denon AVR 4308CI | Serial Protocol - Page 16
UP/DOWN , direct change to **dB TRE DOWN **:00 to 99 by ASCII , 00=0dB TRE ** ---AVR-4308 can be operated from -10 to +10(40 to 60) TRE ? Return Z2PSTRE Status Z2 COMMAND : "*" parameter uses two ASCII characters. (see page4 J) section) example Z2PSBAS UP Z2PSBAS DOWN Z2PSBAS 00 - Denon AVR 4308CI | Serial Protocol - Page 17
PHONO | IPOD SOURCE UP DOWN ** ON OFF ? ON OFF ? ST MONO ? FL UP FL DOWN FL ** FR UP FR DOWN FR ** ? ON OFF ? function MULTI ZONE-3 mode set , and select source at AVR AVR-4308 Return Z3 Status ZONE3 OUTPUT MUTE ON/OFF change Return Z3MU Status ZONE3 Channel setting Return Z3CS Status ZONE3 CHANNEL - Denon AVR 4308CI | Serial Protocol - Page 18
BASS UP/DOWN , direct change to **dB **:00 to 99 by ASCII , 00=0dB ---AVR-4308 can be operated from -10 to +10(40 to 60) Return Z3PSBAS Status ZONE3 TREBLE UP/DOWN , direct change to **dB **:00 to 99 by ASCII , 00=0dB ---AVR-4308 can be operated from -10 to +10(40 to 60) Return Z3PSTRE Status - Denon AVR 4308CI | Serial Protocol - Page 19
SOURCE ON OFF ? function MULTI ZONE-4 mode set , and select source at AVR-4308 ---The name of PARAMETER is the same as that of the time of SI COMMAND. MULTI ZONE-4 mode cancel MULTI ZONE-4 ON/OFF change at AVR-4308 Return Z4 Status Z4CD | Z4V.AUX Z4SOURCE Z4ON - Denon AVR 4308CI | Serial Protocol - Page 20
set to AM ---Band set to FM Return TM Status ---Tuning mode set to AUTO mode ---Tuning mode set to MANUAL mode TF, TP, TM COMMAND : '*' parameters can NOT operate when INPUT source isn't TUNER. example TFANUP TFANDOWN TFAN105000 (1050.00kHz at AM) TFAN? TPANUP TPANDOWN - Denon AVR 4308CI | Serial Protocol - Page 21
※XM Control(North America model only) COMMAND TF TP XM PARAMETER XMUP XMDOWN XM*** (3 digits) XM? XMUP XMDOWN XM**(PRESET No.) XM? XMMEM ? XM Channel UP/DOWN function --- ***:XM CH No. Return TFXM Status XM PRESET CH UP/DOWN , direct change to No.** Return TPXM Status XM PRESET MEMORY Return - Denon AVR 4308CI | Serial Protocol - Page 22
HD PARAMETER HDUP HDDOWN HD****** (6 digits) HDMC*(1 digit) HD? HDUP HDDOWN HD** (PRESET No.) HD? HDMEM HDAM HDFM HD? HDAUTOHD HDAUTO HDMANU ? function HD Channel Tuning mode set to AUTO-HD mode ---Tuning mode set to AUTO mode ---Tuning mode set to MANUAL mode Return HD Status ---BAND, STATION NAME - Denon AVR 4308CI | Serial Protocol - Page 23
** (PRESET No.) DA? DAMEM DAMULTI DAALPHA DAPTY DAAS DAFS DA? ? DAB Channel UP/DOWN function --- ***.*** kHz Return TFDAB Status DAB PRESET CH UP/DOWN TMDAB Status Return HD Status ---STATION NAME, STATION LONG NAME, ENSEMBLE NAME, PROGRAM TYPE, CH No., FREQUENCY, BIT RATE,MONO/STEREO, SIGNAL - Denon AVR 4308CI | Serial Protocol - Page 24
USB USB 90 91 92 93 94 9A 9B 9C 9D 9E 9H 9I 9J 9K 9L 9X 9Y NSE NSB ** NSC ** NSD * function Select INPUT source NET/USB and USB Start Playback Select MULTI ZONE-2 source NET/USB and USB Start Playback Select MULTI ZONE-3 source NET/USB and USB - Denon AVR 4308CI | Serial Protocol - Page 25
"Cursor Right" Control "Enter (Play/Pause)" Control "Play/Pause" Control "Stop" Control "Skip Plus" Control "Skip Minus" Control "Manual Search Plus" Control "Manual Search Minus" Control "Repeat One" Control "Repeat All" Control "Repeat Off" Control "Shuffle Songs" Control "Shuffle Album" Control - Denon AVR 4308CI | Serial Protocol - Page 26
※Cursol/Enter/Menu(Setup) COMMAND MN PARAMETER CUP CDN CLT CRT ENT RTN MEN ON MEN OFF "Cursor Up" Control "Cursor Down" Control "Cursor Left" Control "Cursor Right" Control "Enter" Control "RETURN" Control "GUI Menu ON" Control "GUI Menu OFF" Control function example MNCUP MNCDN MNCLT< - Denon AVR 4308CI | Serial Protocol - Page 27
※Remote Lock/Panel Lock COMMAND SY PARAMETER REMOTE LOCK ON REMOTE LOCK OFF PANEL LOCK ON PANEL+V LOCK ON PANEL LOCK OFF function REMOTE CONTROL LOCK ON/OFF PANEL BUTTON(Except MASTER VOL.)CONTROL LOCK ON PANEL BUTTON & MASTER VOL. CONTROL LOCK ON PANEL BUTTUM & MASTER VOL. CONTROL LOCK OFF - Denon AVR 4308CI | Serial Protocol - Page 28
POWER ON/STANDBY change PWON STANDBY PWSTANDBY MV ** MASTER VOLUME change , **:00 to 99 by ASCII MV80 98 = +18dB(MAX) 80 = 0dB 00 = -80dB 99 = ---(MIN) CV FL ** CHANNEL CR> MU ON OUTPUT MUTE ON/OFF change MUON OFF MUOFF SI PHONO INPUT source change SIPHONO< - Denon AVR 4308CI | Serial Protocol - Page 29
/USB XM HDRADIO DAB USB IPOD ON OFF PHONO | IPOD SOURCE AUTO HDMI DIGITAL ANALOG EXT.IN-1 AUTO PCM DTS DVD HDP TV/CBL SAT VCR DVR V.AUX time of SI COMMAND. REC SELECT mode cancel INPUT mode change ---Set EXT.IN mode at AVR-4308 DIGITAL INPUT mode change VIDEO SELECT mode source change example SINET - Denon AVR 4308CI | Serial Protocol - Page 30
EVENT MS PARAMETER DIRECT PURE DIRECT STEREO MULTI CH IN MULTI CH IN +PL2x C MULTI CH IN +PL2x M MULTI CH DIRECT MULTI CH DIRECT +PL2x C MULTI CH DIRECT +PL2x M MULTI CH PURE D MULTI CH PURE D +PL2x C MULTI CH PURE D +PL2x M MULTI CH IN 7.1 M DIRECT 7.1 M CH PURE D 7.1 DOLBY PRO LOGIC DOLBY PL2 - Denon AVR 4308CI | Serial Protocol - Page 31
EVENT MS PARAMETER DTS NEO:6 C DTS NEO:6 M DTS SURROUND DTS ES DSCRT6.1 DTS ES MTRX6.1 DTS+PL2x C DTS+PL2x M DTS+NEO:6 DTS96/24 DTS96 ES MTRX WIDE SCREEN 5CH STEREO 7CH STEREO SUPER STADIUM ROCK ARENA JAZZ CLUB CLASSIC CONCERT MONO MOVIE MATRIX VIDEO GAME - Denon AVR 4308CI | Serial Protocol - Page 32
MS VS PARAMETER NEURAL DOLBY D+ DOLBY D+ +EX DOLBY D+ +PL2x C DOLBY D+ +PL2x M DOLBY TRUEHD DOLBY HD DOLBY HD+EX DOLBY HD+PL2x C DOLBY HD+PL2x M DTS HD DTS HD MSTR DTS HD+NEO:6 DTS HD+PL2X C DTS HD+PL2X M DTS ES 8CH DSCRT QUICK1 QUICK2 QUICK3 QUICK0 MONIAUTO MONI1 MONI2 ASPNRM ASPFUL SC48P SC10I - Denon AVR 4308CI | Serial Protocol - Page 33
.ON CINEMA EQ.OFF MODE:CINEMA MODE:MUSIC MODE:GAME MODE:PRO LOGIC ROOM EQ:AUDYSSEY ROOM EQ:BYP.LR ROOM EQ:FLAT ROOM EQ:MANUAL ROOM EQ:OFF BAS ** TRE ** function TONE DEFEAT ON/OFF change SURROUND BACK MODE change CINEMA EQ. ON/OFF Change CINEMA / MUSIC / GAME / PL mode - Denon AVR 4308CI | Serial Protocol - Page 34
EVENT PS PARAMETER DRC AUTO DRC LOW DRC MID DRC HI DRC OFF DCO OFF DCO MID DCO LOW DCO MID DCO HIGH LFE ** EFF ON EFF OFF EFF ** DEL *** AFD ON AFD OFF PAN ON PAN OFF DIM ** CEN ** CEI ** ATT ON ATT OFF SWR ON SWR OFF RSZ S RSZ MS RSZ M RSZ ML RSZ L DRC change function D.COMP change LFE change - Denon AVR 4308CI | Serial Protocol - Page 35
MID NIGHT HI RSTR OFF RSTR MODE1 RSTR MODE2 RSTR MODE3 CN ** BR ** CM ** HUE ** function AUDIO DELAY change, ***:000 to 999 by ASCII ---AVR-4308：200=200ms（MAX） 100=100ms, 000=0ms NIGHT MODE change AUDIO RESTORER change CONTRAST change BRIGHTNESS Change CROMA LEVEL change Hue Change example PSDELAY - Denon AVR 4308CI | Serial Protocol - Page 36
PHONO OUTPUT MUTE ON/OFF change OFF Z2CS ST ZONE2 Channel setting MONO Z2CV FL ** **:38 to 62 by ASCII , 50=0dB FR ** **:38 to 62 by ASCII , 50=0dB Z2HPF ON ZONE2 HPF ON/OFF change OFF Z2PS BAS ** ZONE2 BASS change TRE ** ZONE2 TEBLE change The PARAMETER of Z2 EVENT : Uses - Denon AVR 4308CI | Serial Protocol - Page 37
PHONO ON MULTI ZONE-3 ON/OFF change OFF Z3MU ON ZONE3 OUTPUT MUTE ON/OFF change OFF Z3CS ST ZONE3 Channel setting MONO Z3CV FL ** **:38 to 62 by ASCII ON MULTI ZONE-4 ON/OFF change OFF The PARAMETER of Z3 EVENT : Uses two ASCII characters. (see page4 J) section) example Z3PHONO | - Denon AVR 4308CI | Serial Protocol - Page 38
, MODE change ANAM ---Band set to AM ANFM ---Band set to FM ANAUTO ---Tuning mode set to AUTO mode ANMANUAL ---Tuning mode set to MANUAL mode ※XM Control(North America model only) EVENT TF PARAMETER XM*** (3 digits) --- ***:XM CH No. function TP XM**(PRESET No.) XM PRESET change to - Denon AVR 4308CI | Serial Protocol - Page 39
mode HDAUTO ---Tuning mode set to AUTO mode HDMANU ---Tuning mode set to MANUAL mode HD ST NAME HD STATION NAME change (8 digits) STL NAME HD STATION LONG NAME change (56 digits) SIG LEV* HD ANTENNA SIGNAL STATUS change (1 digit) MLT CURRENT* (1 digit) MLT CAST CH (8 digits) PTY (18 - Denon AVR 4308CI | Serial Protocol - Page 40
digits) PTY (16 digits) CHANNEL*** FREQ****** (6 digits) MODE SIGNAL*** TIME**：** DATE**/**/**** --- ***.*** kHz function HD PRESET change to No.** DAB display (only when request("DAB?") is received) DAB DATE display(only when request("DAB?") is received) example TFDAB174928 (174.928kHz) - Denon AVR 4308CI | Serial Protocol - Page 41
※iRadio/mServer/USB Extended Control EVENT NSA PARAMETER 0 1 2 3 4 5 6 7 8 function Onscreen Display Information is Answered By the NSA Command. Display Line1 Information Display Line3 Information Display Line4 Information Display Line5 Information Display Line6 Information Display Line7 - Denon AVR 4308CI | Serial Protocol - Page 42
EVENT NSE PARAMETER 0 1 2 3 4 5 6 7 8 function Onscreen Display Information(mserver/iRadio) is Answered By the NSE Command. Display Line1 Information Display Line3 Information Display Line4 Information Display Line5 Information Display Line6 Information Display Line7 Information Display Line8 - Denon AVR 4308CI | Serial Protocol - Page 43
※iPod Extended Control EVENT PARAMETER IPA 0 1 2 3 4 5 6 7 8 9 function Onscreen Display Information is Answered By the IPA Command. Display Line1 Information Display Line3 Information Display Line4 Information Display Line5 Information Display Line6 Information Display Line7 Information - Denon AVR 4308CI | Serial Protocol - Page 44
EVENT IPA PARAMETER function IPA0Artist CR> IPA1※ Ana Caram CR> IPA2※ Badi Assad CR> IPA3※ Christy Baron_???????? IPA4※ Marta Gomez_?????????? IPA5※ Rebecca Pidgeon_?????? IPA6※ Sara K CR> IPA7※ Valerie Joyce_???????? IPA8# SFL Songs RPT All_??? IPA9 [ 2/ - Denon AVR 4308CI | Serial Protocol - Page 45
EVENT IPE PARAMETER 0 1 2 3 4 5 6 7 8 9 function Onscreen Display Information(iPod) is Answered By the IPA Command. Display Line1 Information Display Line3 Information Display Line4 Information Display Line5 Information Display Line6 Information Display Line7 Information Display Line8 Information - Denon AVR 4308CI | Serial Protocol - Page 46
EVENT IPE PARAMETER function IPE0Artist CR> IPE1※ Ana Caram CR> IPE2※ Badi Assad CR> IPE3※ Christy Baron_???????? IPE4※ Marta Gomez_?????????? IPE5※ Rebecca Pidgeon_?????? IPE6※ Sara K CR> IPE7※ Valerie Joyce_???????? IPE8# SFL Songs RPT All_??? IPE9 [ 2/ - Denon AVR 4308CI | Serial Protocol - Page 47
※Remote Lock/Panel Lock EVENT SY PARAMETER REMOTE LOCK ON REMOTE LOCK OFF PANEL LOCK ON PANEL+V LOCK ON PANEL LOCK OFF function REMOTE CONTROL LOCK ON/OFF PANEL BUTTON(Except MASTER VOL.)CONTROL LOCK ON PANEL BUTTON & MASTER VOL. CONTROL LOCK ON PANEL BUTTUM & MASTER VOL. CONTROL LOCK OFF
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
 |
 |
- 1 -
DENON AVR control protocol
Ver. 5.1.0_a
Application model :
AVR-4308
Application terminal: RS-232C/
Ethernet
Connector specification
Ⅰ
. RS-232C
Connector type:
DB-9pin female type, slave straight connection (DCE type)
( 1pin : GND , 2pin : TxD , 3pin : RxD , 5pin : Common(GND) , 4,6,7,8,9pin : NC )
Communication format:
Synchronous system
: Tone step synchronization
Communication system
: A half duplex
Communication speed
: 9600bps
Character length
: 8 bits
Parity control
: None
Start bit
: 1 bit
Stop bit
: 1 bit
Communication procedure
: Non procedural
Communication data length
: 135 bytes (maximum)
Version
Date
Contents
Page
5.1.0
06.Jul.’07 Original
5.1.0_a
23.Jan.’08 1.Added NSE,NSB,NSC for iRadio Control.
24,42
2.Corrected the Command of IPE,IPA for iPod Control.
25,43,44,45,46
3.Added Response MS Command for DTS Mode.
31,32
4.Corrected the Response Command of PSMODE.
33