Denon AVR 887 Literature/Product Sheet

Denon AVR 887 - AV Receiver Manual

Denon AVR 887 manual content summary:

  • Denon AVR 887 | Literature/Product Sheet - Page 1
    A/V Surround Receiver AVR-887 7.1 A/V Surround Receiver features HDMI repeater, conversion, XM-HD Surround and iPod command and control capability. Audio section s Fully discrete 7-channel high power amplifiers Front Center Surround Surround Back 100 W + 100 W 100 W 100 W + 100 W 100 W + 100 W
  • Denon AVR 887 | Literature/Product Sheet - Page 2
    can be assigned to Zone 2 speakers. s 8ch EXT. IN terminal s Remote In/Out Ports Other features s Audio Delay Function (0 - 200 msec.) s Personal Memory Plus, for Easy Operation The AVR-887 includes the Personal Memory Plus function that automatically remembers the surround mode you last used
  • 1
  • 2

AVR-887
A/V Surround Receiver
7.1 A/V Surround Receiver features HDMI repeater, conversion,
XM-HD Surround and iPod command and control capability.
Audio section
Fully discrete 7-channel high power
amplifiers
Front
100 W + 100 W
(8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
Center
100 W
(8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
Surround
100 W + 100 W
(8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
Surround Back
100 W + 100 W
(8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
High-quality sound reproduction
• New high resolution 32bit floating point DSP
• 96 kHz processing circuit
• 24 bit, 192 kHz capability high resolution D/A conversion
Denon's basic design for high-quality sound reproduction
• Power transformer for high power driven
Twin drive rectifier
• Large aluminum extruded heatsink
Wide-Range Play Capability for DVD-Audio and Super Audio CD
The power amp circuits of the AVR-887 have been meticulously designed to repro-
duce the exceptionally high sound quality with wide frequency response from 10
Hz to 100 kHz.
Dual-Channel surround back power amp for 7.1 surround
The AVR-887 is equipped with a total of 7 power amps including 2 for the Surround
Back channel speaker to give you more clearly defined sound localization at the rear
for 6.1-channel surround sources such as DTS-ES Discrete 6.1, DTS-ES Matrix 6.1,
Dolby Digital EX, and DTS-ES NEO:6.
Supports the most advanced surround playback formats
• DTS 96/24 Decoding for DVD-Video
• DTS-ES Discrete 6.1 and Matrix 6.1
• DTS NEO:6
• DTS
• Dolby DIgital
• Dolby Digital EX
• Dolby Pro Logic
II
x
• Neural Surround
Cinema Equalizer
The sound from movie sources recorded in Dolby Digital, DTS or other
formats
emphasises high-frequency range due to a theater's front speakers being placed
behind the movie screen. If this sound is reproduced in the home theater without
correction, the high-frequency range is too strong. The AVR-887 features a Cinema
Equalizer to correct these high-frequency components so that the sound is clearer
and easier to listen to. (For Dolby Digital, Dolby Pro Logic
II
x, Dolby Digital EX and
DTS surround modes)
Pure Direct mode, for the pure
enjoyment of music in high-quality sound
Video section
HDMI In/Out terminals and repeater function (Supports 1080p signal)
The AVR-887 is equipped with 2 HDMI inputs, as well as 1 output, allowing the
selection of multiple digital video signals. The HDMI terminals also accepts multi-channel
digital audio input and the input signals can be output via amps.
Video Up/Down conversion capable of output to HDMI
The AVR-887 includes a video up/down conversion function that allows the unit to
be connected to the video monitor via a single cable regardless of the video input
signal's format as follows:
1) Composite video signals are converted to HDMI, component video, & S-video;
2) S-video signals are converted to HDMI, component video, & composite video;
3) Component video signals are converted to HDMI
Component video circuits which maintain flat response up to 100MHz,
ensuring sharp image quality
3 sets of component video inputs
Connectivity/ Expandability
ASD-1R Control Dock for iPod
®
(option): Supports iPod playback
when connected to the AVR-887
iPod (*1) playback can be enjoyed through the AVR-887
when the ASD-1R, Denon's original Control Dock for iPod
(sold separately), is connected to the dedicated control ter-
minal of the AVR-887. The iPod can also be controlled via
the remote controller supplied with the AVR-887.
*1) Supports 3rd-generation and later iPods equipped with a Dock connec-
tor. Some functions may not work depending on the generation of the iPod
and the version of the software.
XM Mini-Tuner Ready*
(Supports XM 5.1ch surround powered by Neural Audio)
*
Optional XM Mini-Tuner and subscribes are required.
Auto Setup and RoomEQ with Microphone
The AVR-887 includes an Auto Set-up function that performs basic settings for
the speakers based on frequency response data for the speakers and the lis-
tening room that was measured by a supplied high-performance microphone,
and a Room EQ (equalizer) function that optimizes frequency response character-
istics for the listening room.
Black version is also available.