Denon AVR1910 Owners Manual - English - Page 28
Making detailed settings Manual Setup
UPC - 083795000899
View all Denon AVR1910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Getting Started Connections Settings Playback Multi-Zone Remote Control Information Troubleshooting Specifications ENGLISH Making detailed settings (Manual Setup) Use this procedure to change the Audyssey Auto Setup settings or to change the various audio, video and display settings. The set can be used without changing these settings. Make these settings as necessary. For a description of "Menu map" and operating instructions, see page 18. n Items that can be set with the Manual Setup procedure Making the speaker settings (Speaker Setup) vpage 25 Making the HDMI settings (HDMI Setup) vpage 28 Making the audio settings (Audio Setup) vpage 29 Making the ZONE2 settings (ZONE2 Setup) vpage 30 Making other settings (Option Setup) vpage 30 n Examples of Menu Screen Displays Speaker Setup 4-1.Speaker Setup HDMI Setup 4-2.HDMI Setup Audio Setup 4-3.Audio Setup 1.Amp Assign 2.Speaker Config. 3.Bass Setting 4.Distance 5.Channel Level 6.Crossover Freq. 7.Front Sp Setup Auto Lipsync : ON HDMI Audio Out : Amp HDMI Control : OFF 1.EXT.IN SW Level 2.2ch Direct/Stereo 3.Auto Surround Mode 4.EQ Customize [ENT]:Select [RTN]:Back [RTN]:Back [ENT]:Select [RTN]:Back ZONE2 Setup 4-4.ZONE2 Setup Option Setup 4-5.Option Setup Level Lch : 0dB Level Rch : 0dB Vol.Display : Relative Vol.limit : OFF Power On Lev: Last Mute Lev. : Full 1.Volume Control 2.Source Delete 3.On-Screen Display 4.Quick Select Name 5.ZONE Rename 6.Display 7.Setup Lock [RTN]:Back [ENT]:Select [RTN]:Back Making the speaker settings (Speaker Setup) Default settings are underlined. Use this procedure to set the speakers manually or if you wish to change the settings made with the Audyssey Auto Setup procedure. Setting items Setting contents Amp Assign Normal : The surround back channel audio signals are output. Sets the signal output to the ZONE2 : The ZONE2 audio signals are output. speaker connected to the Front A Bi-Amp : The bi-amp audio signals are output. Set this for bi-amp SURR. BACK/AMP ASSIGN playback of the front A speakers. terminals. Front B Bi-Amp : The bi-amp audio signals are output. Set this for bi-amp playback of the front B speakers. Front Height : The front height channel audio signals are output. Speaker Config. Front : Set the front speaker size. Select speaker configuration • Large : Use of a large speaker that can adequately play back low and size. frequencies. (bass reproduction capability) • Small : Use of a small speaker that has inadequate playback capacity for low frequencies. If "Subwoofer" is set to "No", "Front" is automatically set to "Large". Center : Set the presence and size of the center speaker. • Large : Use of a large speaker that can adequately play back low frequencies. • Small : Use of a small speaker that has inadequate playback capacity for low frequencies. • None : Select when a center speaker is not connected. NOTE • "Large" is not displayed when "Front" is set to "Small". Select "Large" or "Small" not according to the physical size • Even if "Center" has been set to "Large", when "Front" is set to "Small", the "Center" setting automatically switches to "Small". of the speaker but according • Subwoofer : Set the presence of a subwoofer. to the low frequency • Yes : Use a subwoofer. reproduction capabilities • No : Select when a subwooofer is not connected. based on the frequency set When "Front" is set to "Small", "Subwoofer" can automatically set at "Crossover Frequency" to "Yes". (vpage 27). See overleaf 2 Remote control operation buttons Displaying the menu : Cancel the menu : Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menu