Denon AVR1910 Owners Manual - English - Page 29

Getting Started Connections Settings Playback Multi-Zone Remote Control Information Troubleshooting Specifications Setting items Setting contents Speaker Config. Surround : Set the presence and size of the Surround speakers. Select speaker configuration • Large : Use of a large speaker that can adequately play back low and size. frequencies. (bass reproduction capability) • Small : Use of a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the surround speakers are not connected. "S.Back" is displayed when the "Amp Assign" setting (vpage 25) is set to "Normal". "Large" is not displayed when "Front" is set to "Small". S.Back : Set the presence, size and number of surround back speakers. • Large : Use of a large speaker that can adequately play back low frequencies. • Small : Use of a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the surround back speakers are not connected. • 2sp : Use two surround back speakers. • 1sp : Use only one surround back speaker. Surround back audio is output from the surround back L terminal. • "Large" is not displayed when "Surround" is set to "Small". • E ven if "S.Back" is set to "Large", the "S.Back" setting is automatically switched to "Small" if "Surround" is set to "Small". "Front Height" is displayed when the "Amp Assign" setting (vpage 25) is set to "Front Height". NOTE Even when the Surround Back Speaker setting is other than "None", sound may not be emitted from the surround back speaker, depending on the playback source. In this case, "Surround Back" setting other than "OFF" (vpage 45). Front Height : Set the front height speaker size. • Large : Use of a large speaker that can adequately play back low frequencies. • Small : Use of a small speaker that has inadequate playback capacity for low frequencies. • None : Select when a front height speaker is not connected. NOTE Select "Large" or "Small" not according to the physical size of the speaker but according to the low frequency reproduction capabilities based on the frequency set at "Crossover Frequency" (vpage 27). • "Large" is not displayed when "Front" is set to "Small". • E ven if "Front Height" is set to "Large", the "Front Height" setting is automatically switched to "Small" if "Front" is set to "Small". ENGLISH Making detailed settings (Manual Setup) Setting items Setting contents Bass Setting Subwoofer Mode : Select low range signal to be reproduced by Make the settings related to subwoofer. playback of low frequency • LFE : Add the low frequency signal of the channel for which the speaker signals (subwoofer and LFE). size is set to "Small" to the subwoofer signal and output it. This can be set when "Speaker Config." - • LFE+Main : Add the low frequency signal of all channels to the subwoofer signal and output it. "Subwoofer" (vpage • P lay music or a movie source and select the mode offering the 25) is set to "Yes". strongest bass. • S elect "LFE+Main" if you want the bass signals to always be produced from the subwoofer. LPF for LFE : Set the upper limit of the low frequency signals output from the subwoofer. • 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz Distance Unit : Set the unit of distance. Set the distance from the • Feet listening position to the • Meters speakers. Step : Set the minimum variable width of the distance. Measure the distance from • 1ft / 0.1ft the listening position to the • 0.1m / 0.01m speakers beforehand. • FL (Front L)/ FR (Front R)/ C (Center)/ SW (Subwoofer)/ SL (Surround L)/ SR (Surround R/ SBL (Surr. Back L)/ SBR (Surr. Back R)/ FHL (Front Height L)/ FHR (Front Height R) : Select the speaker you want to set, and set the distance. Set the value that is closest to the measured distance. • 0.0ft ~ 60.0ft / 0.00m ~ 18.00m • The speakers that can be selected differ depending on the "Amp Assign" (vpage 25) and "Speaker Config." (vpage 25) settings. • Default settings : Front/Center/Subwoofer/Front Height : 3.6 meters (12 feet) Surround/Surr. Back : 3.0 meters (10 feet) NOTE Set the difference in the distance between the speakers to less than 6.0 meters (20 feet). "Relocate Speaker" is displayed on the screen if an inappropriate distance is set. Default : Reset all distance settings to factory default. • Yes : Reset to the defaults. • No : Do not reset to the defaults. Remote control operation buttons Displaying the menu : Cancel the menu : Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menu 26