Denon AVR5700 Owners Manual - Page 20
Setting the delay time
UPC - 081757503778
View all Denon AVR5700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
2 Switch to the Bass Output screen. ENTER 3 Select the bass signal playback mode. 4 Enter the setting. The System Setup Menu reappears. ENTER Playback modes Subwoofer Only THX (recommended THX mode) The LFE and the low frequencies (80 Hz or lower) of the channels set to "Small" at the Speaker Configuration screen are output from the subwoofer. When a channel is set to "Large", the low frequencies are output from that channel and not from the subwoofer. Front & Subwoofer: Even if "Large" is set for the front speakers at the Speaker Configuration screen, the LFE and the low frequencies of the front channels as well as the low frequencies of the other channels are output from the subwoofer. The front speakers (left and right, but not the center) also output deep bass. This mode is provided for those with large, floor-standing tower speakers that have full range (20 Hz and up) response, and are using a subwoofer in the system as well. NOTE: • To play in the Front & Subwoofer mode, set the front speakers to "Large" and the subwoofer to "Yes" at the Speaker Configuration screen. Setting the delay time • Input the distance between the listening position and the different speakers to set the delay time for the surround mode. • The delay time can be set separately for surround speakers A and B. Preparations: Measure the distances between the listening position and the speakers (L1 to L4 on the diagram at the right). L1: Distance between center speaker and listening position L2: Distance between front speakers and listening position L3: Distance between surround speakers and listening position L4: Distance between subwoofer and listening position FL Subwoofer Center FR L2 L1 L4 Listening position L3 SL SR 1 At the System Setup Menu select "Delay Time". 20