Dewalt D55041 Instruction Manual

D55040 AND D55041

Heavy-Duty Quadraport

TM

4-Port Line Splitter with Regulator

Deﬁnitions: Safety Guidelines

The definitions below describe the level of severity for each signal word. Please

read the manual and pay attention to these symbols.

DANGER:

Indicates an imminently hazardous situation which, if not avoided,

will

result in

death or serious injury

.

WARNING:

Indicates a potentially hazardous situation which, if not avoided,

could

result in

death or serious injury

.

CAUTION

: Indicates a potentially hazardous situation which, if not avoided,

may

result in

minor or moderate injury

.

NOTICE:

Indicates a practice

not related to personal injury

which, if not

avoided,

may

result in

property damage

.

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D

E

WALT TOOL,

CALL US TOLL FREE AT:

1-800-4-D

E

WALT (1-800-433-9258)

WARNING:

For your own safety, read the

air compressor instruction manual before using

any accessory. Failure to heed these warnings may result in personal injury and serious

damage to the

air compressor and the accessory. When servicing this tool, use only

identical replacement parts.

WARNING:

This product contains chemicals known to the State of California to cause

cancer, and birth defects or other reproductive harm.

Wash hands after handling.

WARNING:

Some dust contains chemicals known to the State of California to cause

cancer, birth defects or other reproductive harm such as asbestos and lead in lead

based paint.

This Quadraport is designed to be used with air compressors having a regulated air

supply that CANNOT exceed 200 psi. This product IS NOT designed to be used with

air compressors without an adjustable regulated output or are capable of exceeding

outlet pressures greater than 200 psi. If you experience a problem with your D

E

WALT

purchase, please visit www.dewalt.com or call 1-800-4-

D

E

WALT

(1-800-433-9258).

COMPONENTS (FIG. 1)

A. Hang holes

B. 3/8" Air Inlet

C. Universal quick-connect couplers (unregulated)

1. 1/4" couplers used on D55040

2. 3/8” couplers used on D55041

D. Feet

E. Carry handle

F. Regulator

G. Regulated outlet pressure gauge

H. Universal quick-connect couplers (regulated)

1. 1/4" couplers used on D55040

2. 3/8” couplers used on D55041

Features (Fig. 1)

HANG HOLES

Hang holes (A) allow the Quadraport to be mounted at the work site.

AIR INLET

The air inlet (B) attaches the Quadraport to air hose and air compressor.

UNIVERSAL QUICK-CONNECT COUPLERS

Universal quick-connect coupler (C, H) accepts the three most popular styles of quick-

connect plugs: Industrial, automotive, and ARO. One hand push-to-connect operation

makes connections simple and easy.

FEET

Feet (D) allow the Quadraport to rest on a flat surface.

REGULATOR

The regulator (F) controls the air pressure shown on the outlet pressure gauge. Turn

regulator knob clockwise to increase pressure and counterclockwise to decrease pres-

sure.

OUTLET PRESSURE GAUGE

The outlet pressure gauge (G) indicates the air pressure available at regulated universal

quick-connect couplers (H). This pressure is controlled by the regulator.

ASSEMBLY (Fig. 1)

The Quadraport allows remote air regulation closer to the work area.

WARNING:

Risk of bursting. Can cause serious injury or death. Maximum 200 psi inlet

air pressure. Never operate tools or accessories above marked maximum pressure.

WARNING:

Risk of unsafe operation. Reduce air pressure to 60 psi maximum in

air compressor tank before removing or connecting Quadraport to air compressor or

connecting accessory hoses to unregulated universal quick-connect couplers (C).

WARNING:

Risk of unsafe operation. Reduce air pressure by adjusting regulator (F)

to 60 psi maximum before removing or connecting air hoses to the regulated universal

quick-connect couplers (H). Regulator was factory set at 20–40 psi.

WARNING:

Risk of unsafe operation. Firmly grasp hose in hand when installing or

disconnecting to prevent hose whip.

WARNING:

Risk of unsafe operation. Do not use damaged or worn accessories.

1. Reduce air pressure in air compressor tank to 60 psi.

2. Attach air hose with 3/8" quick-connect coupler to air compressor air outlet.

3. Attach air hose to air inlet (B).

NOTE for model D55040 ONLY:

This Quadraport is equipped with a standard

3/8" air inlet (B) for optimum air flow. For use with a 1/4" air hose the 3/8" air inlet

fitting must be replaced with a 1/4" NPT fitting. All fittings must be installed with a

minimum of six full turns. Failure to do could result in air leaks.

4. The Quadraport can be brought closer to the work site and placed on feet (D) and

carry handle (E) or it can be temporarily mounted using the hang holes (A).

5. Attach hoses and accessories to Quadraport.

6. Adjust regulator at air compressor to desired setting, see air compressor instruction

manual.

IMPORTANT:

The available air pressure at the unregulated universal quick-connect

couplers (C) is regulated by the air compressor regulator. Inlet air pressure

MUST

NOT

exceed 200 psi.

7. Adjust regulator (F) to desired setting. See

Regulator

under

Features.

IMPORTANT:

The available air pressure at the regulated universal quick-connect

couplers (H) is adjusted by regulator (F).

Accessories

WARNING:

Since accessories, other than those offered by D

E

WALT, have not been

tested with this product, use of such accessories with this tool could be hazardous.

Recommended accessories for use with your tool are available at extra cost from your

local dealer or authorized service center. If you need assistance in locating any accessory,

please contact D

E

WALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286,

call 1-800-4-D

E

WALT (1-800-433-9258) or visit our website www.dewalt.com.

Repairs

To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustments

should be performed by a D

E

WALT factory service center, a D

E

WALT authorized service

center or other qualified service personnel. Always use identical replacement parts.

Full One Year Warranty

D

E

WALT heavy duty industrial tools are warranted for one year from date of purchase.

We will repair, without charge, any defects due to faulty materials or workmanship.

For further detail of warranty coverage and warranty repair information, visit www.

dewalt.com or call 1-800-4-

D

E

WALT

(1-800-433-9258). This warranty does not apply to

accessories or damage caused where repairs have been made or attempted by others.

This warranty gives you specific legal rights and you may have other rights which vary

in certain states or provinces.

LATIN AMERICA:

This warranty does not apply to products sold in Latin America. For

products sold in Latin America, see country specific warranty information contained

either in the packaging, call the local company or see website for warranty information.

FREE WARNING LABEL REPLACEMENT:

If your warning labels become illegible or are

missing, call 1-800-4-D

E

WALT (1-800-433-9258) for a free replacement.

RISK OF BURSTING. CAN

CAUSE SERIOUS INJURY

OR DEATH. MAXIMUM

200 PSI INLET AIR

PRESSURE. NEVER

OPERATE TOOLS OR

ACCESSORIES ABOVE

MARKED MAXIMUM

PRESSURE.

RIESGO DE EXPLOSIÓN. PUEDE

PROVOCAR LESIONES GRAVES

O LA MUERTE. MÁXIMA

PRESIÓN DE AIRE DE

ENTRADA DE 200 PSI. NUNCA

OPERE

HERRAMIENTAS O

ACCESORIOS

POR SOBRE LA

MÁXIMA PRESIÓN MARCADA.

RISQUE D’ÉCLATEMENT. PEUT

PROVOQUER DES BLESSURES

GRAVES, VOIRE LA MORT.

PRESSION D'AIR À L'ADMISSION

DE 200 LB/PO² MAXIMUM. NE

JAMAIS ACTIONNER D’OUTILS OU

D’ACCESSOIRES AU-DELÀ DE LA

PRESSION MAXIMALE INDIQUÉE.

ADVERTENCIA

AVERTISSEMENT

WARNING

D55040 ET D55041

Quadraport

TM

industriel

Diviseur de ligne à 4 ports avec régulateur

Déﬁnitions : Lignes directrices

en matière de sécurité

Les définitions ci-dessous décrivent le niveau de gravité pour chaque symbole. Veuillez

lire le mode d’emploi et porter une attention particulière à ces symboles.

DANGER :

Indique une situation dangereuse imminente qui, si elle n’est pas évitée,

causera la mort ou des blessures graves.

AVERTISSEMENT :

Indique une situation potentiellement dangereuse qui, si elle n’est pas

évitée,

pourrait

se solder par un

décès ou des blessures graves

.

ATTENTION :

Indique une situation potentiellement dangereuse qui, si elle n’est pas évitée

pourrait

se solder par

des blessures mineures ou modérées

.

AVIS :

Indique une pratique ne posant

aucun risque de dommages corporels

mais

qui par contre, si rien n’est fait pour l’éviter,

pourrait

poser des

risques de dommages

matériels

.

POUR TOUT COMMENTAIRE OU QUESTION RELATIF À CET OUTIL OU TOUT AUTRE

OUTIL D

E

WALT, COMPOSEZ GRATUITEMENT LE :

1-800-4-D

E

WALT (1-800-433-9258)

AVERTISSEMENT :

Pour votre sécurité, lire le manuel de l’utilisateur propre au

compresseur d’air avant d’utiliser tout accessoire.Tout manquement à ces avertissements

augmente les risques de blessures, et les risques de sérieusement endommager le

compresseur et ses accessoires. Lors de l’entretien de cet outil, n’utiliser que des pièces

de rechange identiques.

AVERTISSEMENT :

Ce produit contient des produits chimiques reconnus par l’État

californien pour causer cancers, malformations congénitales ou être nocifs au système

reproducteur.

Se laver soigneusement les mains après toute utilisation.

AVERTISSEMENT :

Certaines poussières contiennent des produits chimiques, comme

l’amiante et le plomb dans les peintures à base de plomb, reconnus par l’État californien

pour causer cancers, malformations congénitales ou être nocifs au système reproducteur.

Ce Quadraport a été conçu pour être utilisé avec des compresseurs d’air à admission

d’air comprimé régulé ne POUVANT excéder 200 psi. Ce produit N’A PAS été conçu

pour être utilisé avec des compresseurs d’air sans débit régulé ajustable ou pouvant

excéder des pressions de sortie supérieures à 200 psi. Pour tout problème relatif au

produit D

E

WALT, veuillez visiter le site : www.dewalt.com ou appeler le 1-800-4-D

E

WALT

(1-800-433-9258).

DESCRIPTION (FIG. 1)

A. Trous de suspension

B. Admission d’air de 3/8 po

C. Coupleurs rapides universels (sans régulation)

1. Coupleurs de 1/4 po utilisés sur le D55040


D. Pied

E. Poignée de transport

F. Régulateur

G. Manomètre de sortie régulé

H. Coupleurs rapides universels (à régulation)



Caractéristiques (Fig. 1)

TROUS DE SUSPENSION

Les trous de suspension (A) permettent au Quadraport d’être suspendu au sein de la

zone de travail.

ADMISSION D’AIR

L’admission d’air (B) rattache le Quadraport au tuyau à air et au compresseur d’air.

COUPLEURS RAPIDES UNIVERSELS

Les coupleurs rapides universels (C, H) peuvent accepter les trois styles le plus populai-

res de raccords mâles rapides : industriel, automobile et ARO. Le raccordement à une

main rend les connexions simples et faciles.

FIG. 1

A

G

A

B

C

D

E

F

H

Dewalt D55041 Instruction Manual

Dewalt D55041 Manual

Dewalt D55041 manual content summary: