Dewalt DW272 Instruction Manual

Dewalt DW272 Manual

Get Dewalt DW272 PDF manuals and user guides View all Dewalt DW272 manuals
Add to My Manuals
Save this manual to your list of manuals

Dewalt DW272 manual content summary:

  • Dewalt DW272 | Instruction Manual - Page 1
    INSTRUCTION MANUAL DW251-XE, DW252-XE, DW252WT-XE, DW255-XE, DW256-XE, DW257-XE, DW258-XE, DW260-XE, DW262-XE, DW263-XE, DW265-XE, DW266-XE, DW266-220-XE, DW267-XE, DW268-XE, DW268G-XE, DW268-220-XE, DW269-XE, DW272-XE, DW272W-XE, DW272WT-XE, DW274-XE, DW274W-XE, DW274-220-XE, DW276-XE, DW276-220-XE
  • Dewalt DW272 | Instruction Manual - Page 2
  • Dewalt DW272 | Instruction Manual - Page 3
    signal word. Please read the manual and pay attention to these DEWALT TOOL, CALL US AT: 1800 654 155 (Aust) or 09 259 1111 (NZ). SAFETY INSTRUCTIONS FOR POWER TOOLS When using use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts
  • Dewalt DW272 | Instruction Manual - Page 4
    any adjustments, changing accessories, or storing Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type SERVICE a. Have your power tool serviced by a qualified repair person using only identical replacement parts
  • Dewalt DW272 | Instruction Manual - Page 5
    parts of the tool "live" and shock the operator. • Keep handles dry, clean, free from oil and grease. It is recommended to use varies, depending on how often you do this type of work. To reduce your exposure to these power sanding, sawing, grinding, drilling, and other construction activities. Wear
  • Dewalt DW272 | Instruction Manual - Page 6
    sensitive and drywall screwdrivers. Assemble accessories by engaging the hex spindle and tapping lightly on the accessory until it snaps in place. Usually pliers are required to remove the accessory by pulling forward. The 6.35 mm (1/4") hex drive quick change chuck (Fig. 2), is used on all Versa
  • Dewalt DW272 | Instruction Manual - Page 7
    screws: adjust as above until nutsetter is recessed approximately 1.6 mm (1/16") into the locator. 3. Test drive a fastener in scrap material to determine if seating is correct. 4. Adjust following the graphic printed on the tool. VERSA CLUTCH™ UNITS (DW267-XE, DW268-XE, DW268-220-XE, DW268G-XE
  • Dewalt DW272 | Instruction Manual - Page 8
    ) should be performed by certified service centers or other qualified service organizations, always using identical replacement parts. ACCESSORIES WARNING: Since accessories, other than those offered by DEWALT, have not been tested with this product, use of such accessories with this tool
  • Dewalt DW272 | Instruction Manual - Page 9
    FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call (AUS) 1800 654 155 or (NZ) 09 259 1111 for a free replacement. 7
  • Dewalt DW272 | Instruction Manual - Page 10
    8
  • Dewalt DW272 | Instruction Manual - Page 11
    9
  • Dewalt DW272 | Instruction Manual - Page 12
    Australia (03 8720 5100) • 5 Te Apunga Place, Mt Wellington, New Zealand (09 259 1111) (OCT07) Part No. 1007746-00 DW251-XE, etc. Copyright © 2007 DEWALT The following are trademarks for one or more DEWALT power tools: the yellow and black color scheme; the "D" shaped air intake grill; the array of
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
DW251-XE, DW252-XE, DW252WT-XE, DW255-XE, DW256-XE, DW257-XE, DW258-XE,
DW260-XE, DW262-XE, DW263-XE, DW265-XE, DW266-XE, DW266-220-XE, DW267-XE,
DW268-XE, DW268G-XE, DW268-220-XE, DW269-XE, DW272-XE, DW272W-XE,
DW272WT-XE, DW274-XE, DW274W-XE, DW274-220-XE, DW276-XE, DW276-220-XE,
DW281-XE, DW282-XE, DW284-XE
SCREWDRIVERS
INSTRUCTION MANUAL