Dewalt DWH050K Instruction Manual

INSTRUCTION MANUAL

GUIDE D’UTILISATION

MANUAL DE INSTRUCCIONES

DWH050

Drilling Dust Extraction System

Système de dépoussiérage pour le perçage

Sistema de extracción de polvo de taladrado

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE

GARANTÍA.

ADVERTENCIA:

LÉASE ESTE INSTRUCTIVO ANTES DE

USAR EL PRODUCTO.

D

E

WALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286

(MAY11)

Part No. N111555

DWH050

Copyright © 2011 D

E

WALT

The following are trademarks for one or more D

E

WALT power tools: the yellow and black color scheme; the “D” shaped

air intake grill; the array of pyramids on the handgrip; the kit box configuration; and the array of lozenge-shaped humps

on the surface of the tool.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each signal word. Please read the

manual and pay attention to these symbols.

DANGER:

Indicates an imminently hazardous situation which, if not avoided,

will

result

in

death or serious injury

.

WARNING:

Indicates a potentially hazardous situation which, if not avoided,

could

result in

death or serious injury

.

CAUTION:

Indicates a potentially hazardous situation which, if not avoided,

may

result in

minor or moderate injury

.

NOTICE:

indicates a practice

not related to personal injury

which, if not avoided,

may

result in

property damage

.

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D

E

WALT TOOL,

CALL US TOLL FREE AT:

1-800-4-D

E

WALT (1-800-433-9258)

WARNING:

To reduce the risk of injury, read all of this manual carefully before operating

the attachment. Also refer to the manual of any power tool that will be used with this

attachment.

General Safety Warnings

WARNING! Read all safety warnings and all instructions.

Failure to follow the

warnings and instructions may result in electric shock, fire and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS

FOR FUTURE REFERENCE

1) WORK AREA SAFETY

a)

Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b)

Keep children and bystanders away while operating a power tool.

Distractions can

cause you to lose control.

c)

Ensure the workplace is well ventilated.

Exposure to dust at a poorly ventilated

workplace may result in damage to the health.

2) ELECTRICAL SAFETY

a)

Avoid body contact with earthed or grounded surfaces such as pipes, radiators,

ranges and refrigerators.

There is an increased risk of electric shock if your body is

earthed or grounded.

3) PERSONAL SAFETY

a)

Stay alert, watch what you are doing and use common sense when operating a

power tool. Do not use a power tool while you are tired or under the influence

of drugs, alcohol or medication.

A moment of inattention while operating power tools

may result in serious personal injury.

b)

Use personal protective equipment. Always wear eye protection.

Protective

equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce personal injuries.

c)

Do not overreach. Keep proper footing and balance at all times.

This enables

better control of the power tool in unexpected situations.

d)

Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing

and gloves away from moving parts.

Loose clothes, jewelry or long hair can be caught

in moving parts.

4) POWER TOOL USE AND CARE

a)

Do not force the power tool. Use the correct power tool for your application.

The

correct power tool will do the job better and safer at the rate for which it was designed.

WARNING:

The use of any accessory or attachment or performance of any operation

with this tool, other than those recommended in this instruction manual may present a risk

of personal injury.

b)

Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

c)

Use the power tool, accessories and tool bits etc., in accordance with these

instructions taking into account the working conditions and the work to be

performed.

Use of the power tool for operations different from those intended could result

in a hazardous situation.

5) SERVICE

a)

Have your power tool serviced by a qualified repair person using only identical

replacement parts.

This will ensure that the safety of the power tool is maintained.

Additional Specific Safety Rules for Dust Extraction

Systems

•

Do not use the attachment for drilling applications in wood, steel or plastic.

•

Do not use the attachment in core drilling applications.

•

Do not use the attachment for chiselling applications.

•

Use only power tools recommended by D

E

WALT with this attachment. For more information

about D

E

WALT power tools compatible with this attachment, please contact your local

dealer, call 1-800-4-D

E

WALT (1-800-433-9258) or visit our website www.dewalt.com.

•

Do not use the tool in damp or wet conditions.

•

Do not allow to be used as a toy. Close attention is necessary when used by or near children.

•

Use only as described in this manual. Use only manufacturer's recommended attachments.

•

Do not put any object into openings. Do not use with any opening blocked; keep free of lint,

hair and anything that may reduce air flow.

•

Keep hair, loose clothing, fingers and all parts of body away from openings and moving parts.

•

Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas

where they may be present.

•

This appliance collects a significant percentage of, but not all, the dust generated.

WARNING: ALWAYS USE SAFETY GLASSES.

Everyday eyeglasses are NOT safety

glasses. Also use face or dust mask if cutting operation is dusty. ALWAYS wear certified safety

equipment:

• ANSI Z87.1 eye protection (CAN/CSA Z94.3).

• ANSI S12.6 (S3.19) hearing protection.

• NIOSH/OSHA respiratory protection.

WARNING:

Some dust created by power sanding, sawing, grinding, drilling, and other

construction activities contains chemicals known to the State of California to cause cancer, birth

defects or other reproductive harm. Some examples of these chemicals are:

• lead from lead-based paints,

•

crystalline silica from bricks and cement and other masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To

reduce your exposure to these chemicals: work in a well ventilated area, and work with approved

safety equipment, such as those dust masks that are specially designed to filter out microscopic

particles.

•

Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling,

and other construction activities. Wear protective clothing and wash exposed

areas with soap and water.

Allowing dust to get into your mouth, eyes, or lay on the skin

may promote absorption of harmful chemicals.

WARNING:

Use of this tool can generate and/or disburse dust, which may cause serious and

permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection

appropriate for the dust exposure. Direct particles away from face and body.

WARNING: Before beginning the work, check to determine the hazard classification

of the dust produced. Use an industrial dust extractor vacuum of the appropriate

official approved safety class and in compliance with your local dust hazard control

regulations.

WARNING: Always wear proper personal hearing protection.

Under some conditions

and duration of use, noise from this product may contribute to hearing loss.

COMPONENTS (FIG. 1)

WARNING:

Never modify the power tool or any part of it. Damage or personal injury could

result.

A. Hole cleaning nozzle

F. Drilling head release button

[0.32"–0.56" (8–14 mm)]

G. Drilling head

B. Hole cleaning nozzle

[fits drill bit diameters 0–1.47" (0–38 mm)]

[0.56" (14 mm) and above]

H. Drilling head

C. Connection point

[fits drill bit diameters 1.47–2.05" (38–52 mm)]

D. Dust extraction system

I. Suction pad

E. Quick release buttons

INTENDED USE

Your drilling dust extraction system has been designed for professional drilling applications in

concrete and masonry. Using the appropriate hammer drill, drill bit and dust extractor vacuum

it can be used to remove the vast majority of static and airborne dust which without the use of

the dust extraction system could otherwise contaminate the working environment or pose an

increased health risk to the operator and those in close proximity.

Recommended power tools to be used with this attachment are available at extra cost from

your local dealer or authorized service center. If you need assistance in locating any power tool,

please contact D

E

WALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286, call

1-800-4-D

E

WALT (1-800-433-9258) or visit our website

www.dewalt.com

.

DO NOT

use under wet conditions or in presence of flammable liquids or gases.

The drilling dust extraction system is a professional power tool.

DO NOT

let children come into contact with the tool. Supervision is required when inexperienced

operators use this tool.

ASSEMBLY

WARNING: ALWAYS turn off tool and disconnect the tool from the power source

before making any adjustments or removing or installing attachments or accessories.

This applies to both the drill and the dust extractor vacuum.

Such preventative safety

measures reduce the risk of starting the tool accidentally.

Attach Drilling Head to Dust Extraction System (Fig. 1, 2)

1. Select drilling head (G, H) to be used.

2. Slide drilling head (G, H) into dust extraction system (D) until it locks into place.

Remove Drilling Head from Dust Extraction System

(Fig. 1, 2)

Depress drilling head release button (F) to remove drilling head (G, H) from dust extraction

system (D).

Attach Dust Extraction System to Dust Extractor Vacuum

(Fig. 1, 4, 5)

WARNING:

Use only power tools recommended by D

E

WALT with this attachment. For more

information about D

E

WALT power tools compatible with this attachment, please contact your

local dealer, call 1-800-4-D

E

WALT (1-800-433-9258) or visit our website www.dewalt.com.

Push dust extractor vacuum hose nozzle (K) into connection point (C) until tight. For a more

secure connection use the AirLock connection system.

NOTE:

Ensure hose connection is secure.

AIRLOCK CONNECTOR SYSTEM - DWV9000 (SOLD SEPARATELY)

AirLock allows for a fast, secure connection between the drilling dust extraction system and the

dust extractor vacuum.

1. Ensure the collar (L) on the AirLock connector (M) is in the unlock position. Align notches (R)

on collar and AirLock connector as shown for unlock and lock positions.

2. Push the AirLock connector (M) onto the connection point (C).

3. Rotate the collar (L) to the locked position.

NOTE:

The ball bearings (N) inside collar will lock into slot (O) and secure the connection.

The drilling dust extraction system is now securely connected to the dust extractor vacuum.

If you have questions or comments, contact us.

Pour toute question ou tout commentaire, nous contacter.

Si tiene dudas o comentarios, contáctenos.

1-800-4-D

E

WALT • www.dewalt.com

Dewalt DWH050K Instruction Manual

Dewalt DWH050K Manual

Dewalt DWH050K manual content summary: