EVGA RB-132-BL-E758-RX User Manual

EVGA RB-132-BL-E758-RX - X58 SLI - Recert Manual

Get EVGA RB-132-BL-E758-RX - X58 SLI - Recert PDF manuals and user guides
UPC - 843368011833
View all EVGA RB-132-BL-E758-RX manuals
Add to My Manuals
Save this manual to your list of manuals

EVGA RB-132-BL-E758-RX manual content summary:

  • EVGA RB-132-BL-E758-RX | User Manual - Page 1
  • EVGA RB-132-BL-E758-RX | User Manual - Page 2
    User's Guide EVGA X58 SLI Motherboard EVGA | 1
  • EVGA RB-132-BL-E758-RX | User Manual - Page 3
    EVGA | 2
  • EVGA RB-132-BL-E758-RX | User Manual - Page 4
    in the Kit 8 Intentions of the Kit 8 EVGA X58 SLI Motherboard 9 Motherboard Specifications 9 Unpacking and Parts Descriptions 11 Unpacking ...11 Equipment ...11 EVGA X58 SLI Motherboard 13 Hardware Installation 16 Safety Instructions 16 Preparing the Motherboard 17 Installing the CPU 17
  • EVGA RB-132-BL-E758-RX | User Manual - Page 5
    35 Main Menu ...35 Standard CMOS Features Menu 38 Date and Time...39 SATA Channel...39 Halt On ...41 Memory ...41 Advanced BIOS Features 42 EVGA | 4
  • EVGA RB-132-BL-E758-RX | User Manual - Page 6
    EVGA X58 SLI Motherboard Hard Disk Boot Priority 43 CD-ROM Device Priority 43 First/Second/Third Boot Device 43 Boot Other Device 44 Boot Up Configuration Menu 52 Init Display First 52 Reset Configuration 53 Resources Controlled By 53 IRQ Resources 53 PCI/VGA Palette Snoop 54 EVGA | 5
  • EVGA RB-132-BL-E758-RX | User Manual - Page 7
    CPU Clock Ratio 61 CPU Host Frequency (Mhz 62 Spread Spectrum 62 EVGA VDroop control 62 CPU VCore...62 CPU VTT Voltage 62 CPU PLL Installing Drivers and Software 65 Windows XP/Vista Driver Installation 65 Appendix A. POST Codes for the EVGA X58 SLI Motherboard 66 EVGA Glossary of Terms
  • EVGA RB-132-BL-E758-RX | User Manual - Page 8
    X58 SLI Motherboard List of Figures Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. Figure 8. Figure 9. Figure 10. Figure 11. Figure 12. Figure 13. EVGA X58 SLI Motherboard Layout 14 Chassis Backpanel Connectors 15 PW1 Motherboard Connector 22 BIOS CMOS Setup Utility Main
  • EVGA RB-132-BL-E758-RX | User Manual - Page 9
    kit contains all the hardware necessary to install and connect your new EVGA X58 SLI Motherboard. However, it does not contain the following items that must be purchased separately to make the motherboard functional. Intel Microprocessor System Memory Cooling fan for the Microprocessor Graphics Card
  • EVGA RB-132-BL-E758-RX | User Manual - Page 10
    X58 SLI Motherboard EVGA X58 SLI Motherboard Thank you for purchasing the EVGA X58 SLI Motherboard. This motherboard offers enthusiast performance Motherboard Specifications Size ATX form factor of 12 inch x 9.6 inch Microprocessor support Intel Core i7 processor Operating systems: Supports Windows
  • EVGA RB-132-BL-E758-RX | User Manual - Page 11
    Supports 8-channel audio Supports S/PDIF output (Optical and COAX) Supports Jack-Sensing function Triple PCI Express Support Three (3) PCI-E 2.0 Slots Supports and power management features Green Function Supports ACPI (Advanced Configuration and Power Interface) Supports S0 (normal), S1 (power on
  • EVGA RB-132-BL-E758-RX | User Manual - Page 12
    Motherboard. The EVGA X58 SLI Motherboard This PCI Express motherboard contains the Intel X58 and ICH10R chipset and is SLI-ready for both 2-Way and 3-Way SLI configurations. 1 - Visual Guide Helps to quickly and visually guide you through the hardware installation of the motherboard. 1 - I/O Shield
  • EVGA RB-132-BL-E758-RX | User Manual - Page 13
    on the motherboard and IDE device. 1 - 2-Way SLI Bridge Bridges two (2) graphic cards together which allows for 2-Way SLI. 1 - 3-Way SLI Bridge Bridges three (3) graphic cards together which allows for 3-Way SLI. 1 - Installation CD Contains drivers and software needed to setup the motherboard. EVGA
  • EVGA RB-132-BL-E758-RX | User Manual - Page 14
    EVGA X58 SLI Motherboard EVGA X58 SLI Motherboard The EVGA X58 SLI Motherboard with the Intel X58 and ICH10R chipset is a PCI Express, SLI-ready motherboard. Figure 1 shows the motherboard and Figures 2 shows the back panel connectors. EVGA | 13
  • EVGA RB-132-BL-E758-RX | User Manual - Page 15
    20. PCI Express x1 Slot 21. Front Panel Audio Connector 22. Back Panel Connectors (Figure 2) 23. CPU Fan Connector 24. 8-pin ATX_12V Power Connector 25. Motherboard Battery Figure 1. EVGA X58 SLI Motherboard Layout EVGA | 14
  • EVGA RB-132-BL-E758-RX | User Manual - Page 16
    1 4 EVGA X58 SLI Motherboard 8 8 6 2 3 5 2 7 1. PS/2 Keyboard Port 2. USB 2.0 Ports (Eight) 3. Clear CMOS Button 4. Coaxial SPDIF Output 5. Optical SPDIF Output 6. IEE1394a (Firewire In Center/Subwoofer Rear Speaker Out Side Speaker Out Figure 2. Chassis Back Panel Connectors EVGA | 15
  • EVGA RB-132-BL-E758-RX | User Manual - Page 17
    Installation This section will guide you through the installation of the motherboard. The topics covered in this section are: Preparing the motherboard Installing the CPU Installing the CPU fan Installing the memory Installing the motherboard Connecting cables Safety Instructions To reduce the risk
  • EVGA RB-132-BL-E758-RX | User Manual - Page 18
    EVGA X58 SLI Motherboard Preparing the Motherboard Installing the CPU Be very careful when handling the CPU. Hold the processor only by the edges and do not touch the bottom of edges. It is a good idea to save the cover so that whenever you remove the CPU you have a safe place to store it. EVGA | 17
  • EVGA RB-132-BL-E758-RX | User Manual - Page 19
    is complete. Align notches with notches on the CPU Installing the CPU Fan There are many different fan types that can be used with this motherboard. Follow the instruction that came with you fan assembly. Be sure that the fan orientation is correct for your chassis type and your fan assembly
  • EVGA RB-132-BL-E758-RX | User Manual - Page 20
    EVGA X58 SLI Motherboard Installing System Memory (DIMMs) Your new motherboard has six 240-pin slots for DDR3 memory. These slots support 256 MB, 512 MB, 1GB, 2GB, 4GB DDR3 technologies. There must be at least at both sides of the DIMM slot automatically lock the DIMM into the connector. EVGA | 19
  • EVGA RB-132-BL-E758-RX | User Manual - Page 21
    motherboard and then make all the connections. It is normally easier to secure the motherboard first. Use the following procedure to install the I/O shield and secure the motherboard Installing the I/O Shield The motherboard kit comes with an I/O . Before installing the motherboard, install the I/O
  • EVGA RB-132-BL-E758-RX | User Manual - Page 22
    connectors to the I/O shield. 4. Ensure that the fan assembly is aligned with the chassis vents according to the fan assembly instruction. 5. Secure the motherboard with a recommended minimum of nine (9) screws. Connecting Cables This section takes you through all the necessary connections on the
  • EVGA RB-132-BL-E758-RX | User Manual - Page 23
    the DIMM slots. Make sure that the power supply cable and pins are properly aligned with the connector on the motherboard. Firmly plug the power supply cable into the connector and make sure it is secure. Card edge PW1 connector Plug GND 18 GND 19 GND 20 RSVD 21 +5V 22 +5V 23 +5V 24 GND EVGA | 22
  • EVGA RB-132-BL-E758-RX | User Manual - Page 24
    EVGA X58 SLI Motherboard 8-pin ATX 12V Power (PW12) PW12, the 8-pin ATX 12V power connection, is used to provide power to the CPU. Align the pins to the connector and press firmly until seated. GND 12V Connecting IDE Hard Disk Drives The IDE connector supports Ultra ATA 133/100 IDE hard disk drives
  • EVGA RB-132-BL-E758-RX | User Manual - Page 25
    to connect the Serial ATA II device to the motherboard. These connectors support the thin Serial ATA II cables for primary storage points support RAID 0, RAID 1, RAID 5, RAID 0+1 and JBOD configurations. SATA6 and SATA7 are controlled by the JMicron JMB362 chip. SATA 5 SATA 4 TX- TX- RX+ TX
  • EVGA RB-132-BL-E758-RX | User Manual - Page 26
    EVGA X58 SLI Motherboard Connecting Internal Headers Front Panel Header The front panel header on this motherboard is one connector used to connect the following four cables. (see Table 2 for Active 2 PWR LED 4 STBY LED 5 Ground 7 RST BTN 6 PWR BTN 8 Ground 9 +5V 10 Empty EVGA | 25
  • EVGA RB-132-BL-E758-RX | User Manual - Page 27
    cases are equipped with the front panel option). 2. Connect the end of the cable(s) to the IEEE1394a headers on the motherboard. Table 3. IEEE 1394a Connector Pins Connector IEEE 1394a Connector 10 9 8 7 6 5 4 3 2 1 Pin 1 2 3 4 5 6 7 8 9 10 Signal TPA+ TPAGND GND TPB+ TPB+12V +12V
  • EVGA RB-132-BL-E758-RX | User Manual - Page 28
    EVGA X58 SLI Motherboard USB Headers This motherboard contains eight (8) USB 2.0 ports that are exposed on the rear panel of the chassis (Figure 2). The motherboard also contains two 10-pin internal header connectors onboard that can be used to connect an optional external bracket containing four
  • EVGA RB-132-BL-E758-RX | User Manual - Page 29
    audio standard and provides two kinds of audio output choices: the Front Audio, the Rear Audio. The front Audio supports re-tasking function. Table 5. Front Audio Connector Connector Front Audio Connector 10 9 8 7 6 5 4 3 2 1 Pin Signal 1 PORT1_L 2 AUD_GND 3 PORT1_R 4 PRECENCE_J
  • EVGA RB-132-BL-E758-RX | User Manual - Page 30
    EVGA X58 SLI Motherboard Fan Connections There are six fan connections on the motherboard. The fan speed can be detected and viewed in the PC Health either a 3-pin or a 4-pin connector. Connect a 3-pin connector to pins 1, 2, and 3 on the motherboard connector. CPU Fan Ground +12V Sense Control
  • EVGA RB-132-BL-E758-RX | User Manual - Page 31
    six (6) expansion slots, four (4) PCI Express slots and two (2) PCI slots. For a full list of PCI Express graphic cards supported by this motherboard, visit: www.EVGA.com/Products 6 5 4 3 2 1 Slot Listing 1 - PCI-E 2.0 x16 - Slot 1 (Primary) 2 - PCI-E x1 - Slot 1 3 - PCI-E 2.0 x8/x16 - Slot
  • EVGA RB-132-BL-E758-RX | User Manual - Page 32
    EVGA X58 SLI Motherboard PCI Slots The two PCI slots support many expansion cards such as a LAN card, USB x8 Slots These PCI Express slots are reserved for Graphic Cards. The design of this motherboard supports multiple Graphic Card technology. When installing a PCI Express Graphic Card, be sure the
  • EVGA RB-132-BL-E758-RX | User Manual - Page 33
    system, or clear the CMOS. Clear CMOS Button The motherboard uses the CMOS RAM to store all the set parameters. for easy debugging and testing of the system during troubleshooting situations. The POWER button with LED indicates the system EVGA | 32 RESET POWER Clear CMOS Button Button Button
  • EVGA RB-132-BL-E758-RX | User Manual - Page 34
    EVGA X58 SLI Motherboard Post Port Debug LED and LED Status Indicators Post Port Debug LED Provides two-digit POST codes to show why the system may be failing to boot. It is useful during troubleshooting situations. This Debug LED will also display current CPU temperatures after the system has fully
  • EVGA RB-132-BL-E758-RX | User Manual - Page 35
    : Enter BIOS Setup Main Menu Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Frequency/Voltage Control EVGA | 34
  • EVGA RB-132-BL-E758-RX | User Manual - Page 36
    . Changing some settings could damage your computer. Main Menu The main menu allows you to select from the list of setup functions and two exit choices. Use the Page Up and Page Down keys to scroll through the blue is non-changeable, and data in a red box is highlighted for selection. EVGA | 35
  • EVGA RB-132-BL-E758-RX | User Manual - Page 37
    and PCI configurations. PC Health Status Use this menu to monitor the real-time system status of your PC, including temperature, voltages, and fan speed. EVGA | 36
  • EVGA RB-132-BL-E758-RX | User Manual - Page 38
    Use this command to save settings to CMOS and exit setup. Exit Without Saving Use this command to abandon all setting changes and exit setup. EVGA | 37
  • EVGA RB-132-BL-E758-RX | User Manual - Page 39
    white is for information only, data in yellow is changeable, data in blue is non-changeable, and data in a red box is highlighted for selection. EVGA | 38
  • EVGA RB-132-BL-E758-RX | User Manual - Page 40
    display SATA Channel sub-menu IDE Auto-Detect [Press Enter] Extended IDE Drive Access Mode [None} Auto Capacity 0 MB Cylinder 0 Head 0 Precomp 0 Landing Zone 0 Sector 0 EVGA | 39
  • EVGA RB-132-BL-E758-RX | User Manual - Page 41
    [Manual} [CHS] 0 MB .....0 [ 0] [ 0] [ 0] [ 0] Press ENTER to display sub-menu or enter number manually Cylinder The BIOS supports the supporting LBA (Logical Block Addressing). :Move ENTER:Accept Large For HDD greater than 528 MB but not supporting LBA. Auto Recommended mode. ESC:Abort EVGA
  • EVGA RB-132-BL-E758-RX | User Manual - Page 42
    system. Extended Memory BIOS determines how much extended memory is present during the POST. Total Memory This value represents the total memory of the system. EVGA | 41
  • EVGA RB-132-BL-E758-RX | User Manual - Page 43
    white is for information only, data in yellow is changeable, data in blue is non-changeable, and data in a red box is highlighted for selection. EVGA | 42
  • EVGA RB-132-BL-E758-RX | User Manual - Page 44
    to go to the various devices. Then use the + or - keys to move the device priority up or down in the list. To go back to the previous menu, press Esc. 1. Ch0. : ST3802110A 2. Bootable Add-in Cards Use the + and Hard Disk CDROM Legacy LAN Disabled :Move ENTER:Accept ESC:Abort EVGA | 43
  • EVGA RB-132-BL-E758-RX | User Manual - Page 45
    a password to gain access to the CMOS Setup screen. Select System to require a password to access the CMOS Setup screen and when the system boots. EVGA | 44
  • EVGA RB-132-BL-E758-RX | User Manual - Page 46
    :Fail-Safe Defaults F7:Optimized Defaults Figure 7. Integrated Peripherals Menu Legacy Devices Press Enter to display the Legacy Devices menu. Onboard Serial Port 1 [3F8/IRQ4] EVGA | 45
  • EVGA RB-132-BL-E758-RX | User Manual - Page 47
    to display the OnChip PATA/SATA Device menu. SATA Mode LEGACY Mode Support [IDE] [Disabled] JMB362 SATA Controller [Auto] JMB363 SATA/PATA Controller the onboard Serial SATA mode. IDE: Use the Serial ATA hard disk drivers as Parallel ATA storage devices. RAID: Create a RAID 0, 1, 0+1, EVGA | 46
  • EVGA RB-132-BL-E758-RX | User Manual - Page 48
    or disable the IEEE1394 (Firewire) interface. P80 Show CPU Temp. When this function is enabled the onboard Post Port LED will display the CPU temperature. EVGA | 47
  • EVGA RB-132-BL-E758-RX | User Manual - Page 49
    . Options are Full/Low Speed and High Speed. USB Keyboard Function Use this function to enable or disable support for USB keyboard under DOS. USB Mouse Function Use this function to enable or disable support for USB mouse under DOS USB Storage Function Use this function to enable or disable legacy
  • EVGA RB-132-BL-E758-RX | User Manual - Page 50
    Defaults Figure 8. Power Management Setup Menu ACPI Function This function on the Power Management Setup menu allows you to enable or disable the ACPI function. EVGA | 49
  • EVGA RB-132-BL-E758-RX | User Manual - Page 51
    you to enable or disable the Power-on by alarm function. Set to [Disable] to prevent poweron by alarm. When set to [Enable], you can manually put in the day of the month and the time of the alarm
  • EVGA RB-132-BL-E758-RX | User Manual - Page 52
    last operating status after power returns from a power failure. Off: The system stays off after a power failure. On: The system stays on after a power failure EVGA | 51
  • EVGA RB-132-BL-E758-RX | User Manual - Page 53
    allows you to define if the initial display is in the PCI slot or in the PCI Express slot. Options are [PCI Slot] and [PCIEx]. EVGA | 52
  • EVGA RB-132-BL-E758-RX | User Manual - Page 54
    plug-and-play compatible devices or if you can manually select IRQ, DMA, and memory base address fields. to automatically populate these fields. If you select [Manual] so you can assign the resources, IRQ Resources , set Resources Controlled By to [Manual]. With this field enabled, press Enter
  • EVGA RB-132-BL-E758-RX | User Manual - Page 55
    whether designed for PCI or ISA Bus architecture. PCI/VGA Palette Snoop This item is designed to overcome problems that may be caused by some nonstandard VGA cards.. INT Pin 1/2/3/4/5/6/7/8 Assignment This function on the PnP or use the + and - keys to go up and down the list of sizes. EVGA | 54
  • EVGA RB-132-BL-E758-RX | User Manual - Page 56
    Menu All of the values shown in Blue are dynamic and change as the speed and voltages of the various components change with system usage. EVGA | 55
  • EVGA RB-132-BL-E758-RX | User Manual - Page 57
    menu to control the speed of the various fans on the motherboard. Set CPU fan speed to [SmartFan] when you want the speed of the fans automatically controlled based on temperature. To set the fan speed to a constant rate, select [Manual] and then enter the speed from 0% to 100%. Set the desired
  • EVGA RB-132-BL-E758-RX | User Manual - Page 58
    [Press Enter] [Press Enter] CPU Clock Ratio [22X] CPU Host Frequency(Mhz) [133] Spread Spectrum [Disabled] PCIE Frequency(Mhz) [100] Item Help Main Level ` EVGA VDroop control CPU VCore CPU VTT Voltage CPU PLL Vcore DIMM Voltage DIMM DQ Vref QPI PLL Vcore IOH Vcore IOH/ICH I/O Voltage ICH
  • EVGA RB-132-BL-E758-RX | User Manual - Page 59
    , 4 way, 5 way and 6 way. Rank Interleave Setting This function is allows you to select the Rank Interleave Setting. The options are 1 way, 2 way and 4 way. EVGA | 58
  • EVGA RB-132-BL-E758-RX | User Manual - Page 60
    are Auto, 1T and 2T. CPU Feature Select CPU Feature from the Frequency/Voltage Control menu and press Enter to display the CPU Feature menu. EVGA | 59
  • EVGA RB-132-BL-E758-RX | User Manual - Page 61
    function to enable the Intel Turbo Mode Function. The options are Enabled and Disabled. CxE Function This function allows you to select the lowest C state supported according as CPU and MB. The options are Auto, Disabled, C1, C1E, C3 and C6. Execute Disable Bit When this function is disabled, it
  • EVGA RB-132-BL-E758-RX | User Manual - Page 62
    value changes the CPU Frequency value depending on the value you choose. Use the Page Up and Page Down keys to scroll through the options. EVGA | 61
  • EVGA RB-132-BL-E758-RX | User Manual - Page 63
    to scroll through the options. Spread Spectrum This item reduces the EMI generated. The options are Disabled and Enabled. EVGA VDroop control EVGA VDroop control is a safety measure by motherboards to protect the CPU. Select to [With VDroop] to calibrate CPU VDroop or select to [Without VDroop] to
  • EVGA RB-132-BL-E758-RX | User Manual - Page 64
    ] to automatically set the voltage. CPU Thermal Trip This function allows you to set the CPU Thermal Trip function. The options are Enabled and Disabled. EVGA | 63
  • EVGA RB-132-BL-E758-RX | User Manual - Page 65
    PWM Frequency This function allows you to select the PWM frequency. For the following options, higher is cleaner, lower is more energy efficient: 806KHz, 935KHz, 1057KHz. EVGA | 64
  • EVGA RB-132-BL-E758-RX | User Manual - Page 66
    Storage JMicron SATA Drivers EVGA E-LEET NVIDIA SLI Drivers Adobe Acrobat Reader User's Manual Windows XP/Vista Driver Installation 5. Insert the Intel X58 Express installation CD for the motherboard included in the kit. 6. The CD will autorun, install the drivers and utilities listed on the install
  • EVGA RB-132-BL-E758-RX | User Manual - Page 67
    This section provides the Award POST Codes (Table 6) for the EVGA X58 SLI Motherboard during system boot up. The POST Codes are displayed on the Debug LED readout located directly onboard the motherboard. This Debug LED will also display current CPU temperatures after the system has fully
  • EVGA RB-132-BL-E758-RX | User Manual - Page 68
    Shadow VBIOS Shadow system/video BIOS 26 Clock Gen Init onboard clock generator and sensor 27 Setup BDA Setup BIOS DATA AREA (BDA) 28 Reserved EVGA | 67
  • EVGA RB-132-BL-E758-RX | User Manual - Page 69
    1 masked interrupts by alternately turning off and on the interrupt lines. Verify 8259 Channel 2 masked interrupts by alternately turning off and on the interrupt lines. EVGA | 68
  • EVGA RB-132-BL-E758-RX | User Manual - Page 70
    CPU vendor specific version string and turn on all necessary CPU features PnP logo and PnP early init Setup virus protect according to Protect Setup EVGA | 69
  • EVGA RB-132-BL-E758-RX | User Manual - Page 71
    autoconfiguration check up Initialize floppy disk drive Install FDD and setup BIOS data area parameters Initialize hard drive controller IDE device detection Initialize serial ports. EVGA | 70
  • EVGA RB-132-BL-E758-RX | User Manual - Page 72
    RAM and clear screen. Display PNP devices Final USB initialization Setup ACPI tables Scan for Option ROMs Enable Parity Check Enable IRQ12 if mouse present EVGA | 71
  • EVGA RB-132-BL-E758-RX | User Manual - Page 73
    Award POST Codes Code Name 91 Reserved 92 Reserved 93 Boot Medium Read 94 Final Init 95 NumLock 96 Boot Attempt C0 Base CPU test C1 Memory Presence C2 Early Memory NMI occurs, display Press F1 to disable NMI, F2 reboot. To program chipset from defaults values E1- Page 1, E2 - Page 2, etc. EVGA | 72
  • EVGA RB-132-BL-E758-RX | User Manual - Page 74
    EVGA Glossary of Terms ACPI - Advanced Configuration and Power Interface AFR - Alternate Frame Rendering APIC - Advanced Programmable Interrupt Controller Event Timer HT - Hyper-Threading HSF - Heat Sink Fan I/O - Input/Output IDE - Integrated Drive Electronics Configuring the BIOS EVGA | 73
  • EVGA RB-132-BL-E758-RX | User Manual - Page 75
    Disks JEDEC - Joint Electron Device Engineering Council LAN - Local Area Network LCD - Liquid Crystal Display LGA - Land Grid Array LN2 - Liquid Nitrogen Cooling MAC - Media Access Control MCP - Media SFR - Split Frame Rendering SLI - Scalable Link Interface SPD - Serial Presence Detect EVGA | 74
  • EVGA RB-132-BL-E758-RX | User Manual - Page 76
    SPDIF - Sony/Philips Digital Interconnect Format SPP - System Platform Processors TCP/IP - Transmission Control Protocol/Internet Protocol USB - Universal Serial Bus VDroop - V-core Voltage Drop VGA - Video Graphics Array Configuring the BIOS EVGA | 75
  • EVGA RB-132-BL-E758-RX | User Manual - Page 77
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77