EdgeStar DW18SS Instruction Manual
EdgeStar DW18SS Manual
 |
View all EdgeStar DW18SS manuals
Add to My Manuals
Save this manual to your list of manuals |
EdgeStar DW18SS manual content summary:
- EdgeStar DW18SS | Instruction Manual - Page 1
Dishwasher Installation Manual USA - EdgeStar DW18SS | Instruction Manual - Page 2
Installation Manual For Dishwasher Models - EdgeStar DW18SS | Instruction Manual - Page 3
and / or use. 1. IMPORTANT SAFETY INSTRUCTIONS 1 1.1 INSPECT THE DISHWASHER 2 1.2 HOW TO CONTACT US : 2 2. TOOLS WHICH MAY BE NEEDED 3 3. MATERIALS WHICH MAY BE NEEDED 3 4. MATERIALS SUPPLIED 4 4.1 PARTS SUPPLIED 4 4.2 MANUAL BAG 4 4.3 DISHWASHER PARTS BAG 1 4 4.4 DISHWASHER - EdgeStar DW18SS | Instruction Manual - Page 4
permanently connected by an authorized service representative. (If needed contact your dealer to schedule an authorized service agent for conversion with an if it has missing or broken parts. • Also follow the safety instructions of the user manual. • To reduce the risk of electric shock, fire, or - EdgeStar DW18SS | Instruction Manual - Page 5
kept out of the reach of children. Danger of suffocation! • Remove the door to the washing compartment when removing an old dishwasher from service or discarding it. Ensure that the appliance presents no danger to children while being stored for disposal. • Old appliances may contain materials that - EdgeStar DW18SS | Instruction Manual - Page 6
2. TOOLS WHICH MAY BE NEEDED 3. MATERIALS WHICH MAY BE NEEDED (Additional materials may be required to comply with local codes) Hot Water Supply Line - Minimum 3/8" O.D. copper tubing or metal braided dishwasher supply line. UL listed conduit connector or strain relief. Teflon tape or other pipe - EdgeStar DW18SS | Instruction Manual - Page 7
you have all the b. x1 parts as listed to the left. c. x1 4.2 MANUAL BAG The dishwasher comes with a manual bag containing: d. x6 • User manual, • Installation manual and e. x1 • Quick reference guide. f. x1 4.3 DISHWASHER PARTS BAG 1 This dishwasher bag comes with the following parts - EdgeStar DW18SS | Instruction Manual - Page 8
5. DISHWASHER SPECIFICATIONS 5.1 TECHNICAL FEATURES Load capacity Permissible water pressure Electrical connection 8 place settings 4.35 - 145 psi (0.3 - 10 bars) 120 V (volts), 12 A (amps), 60 Hz (hertz) Total power Heater power 1400 W (watts) 1240 W (watts) Notice : Because we continually - EdgeStar DW18SS | Instruction Manual - Page 9
6. ENCLOSURE PREPARATION 6.1 ELECTRICAL PREPARATION WARNING The dishwasher is designed for an electrical supply of 120 V, 60 Hz, AC, connected to a dishwasher-dedicated, properly grounded electrical circuit with a fuse or breaker rated for 15 amperes. 6.2 PREPARATION FOR INSTALLING MOUNTING - EdgeStar DW18SS | Instruction Manual - Page 10
6.3.1 INSTALLING THE FOOT SUPPORTS Supplied (4) 3If4th1/e4"he(8ig5h0tmomf th-e87e0nmcloms)uureseiss3h3o7rt/1s6u"ptpoorts as shown in the figure. If the height of the enclosure is above 341/4" (870mm) use long supports as shown in the figure. Supplied (4) 7 USA - EdgeStar DW18SS | Instruction Manual - Page 11
Adjust the front foot level with the adjusting wrench to balance and raise the dishwasher to the enclosure height. Adjust the rear foot level with a screwdriver to balance and raise the dishwasher to the enclosure height. Notice : • Make sure the dishwasher is plumb and notice dishwasher can be - EdgeStar DW18SS | Instruction Manual - Page 12
6.4 PREPARING THE WATER CONNECTION (A) Install an easily accessible shut-off valve (not supplied) in the water supply line. All solder connections must be made before the water line is connected to the dishwasher's water inlet valve. Water can also be supplied to the dishwasher by using a flexible - EdgeStar DW18SS | Instruction Manual - Page 13
required. B 6.5.3 DISPOSAL Remove the drain connection plug before attaching the drain hose from the dishwasher. Every disposal has a hook up for a dishwasher; consult your disposer manual for correct connection. (Figure C) C 10 USA - EdgeStar DW18SS | Instruction Manual - Page 14
6.7 STEAM PROTECTION FOIL Steam will form inside the dishwasher during operation. At the end of the cycle, when the dishwasher door is opened, it is required to use a steam protection foil to prevent any steam from collecting on the underside of the counter top. 6.6.2 FITTING THE PROTECTION FOIL - EdgeStar DW18SS | Instruction Manual - Page 15
7. PLACEMENT OF DISHWASHER INTO THE OPENING Now place the dishwasher into the opening and get ready to connect all hoses and electrical connections. CAUTION Make sure all hoses are pulled through the side opening of the cabinet, no hoses are kinked and all slack is taken out as shown in the above - EdgeStar DW18SS | Instruction Manual - Page 16
reduce the likelihood of damage to the power-supply cord. 7.2.1 GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of a malfunction or a risk of electric shock. Check with a qualified electrician or service representative if you are in doubt whether the appliance is properly - EdgeStar DW18SS | Instruction Manual - Page 17
7.3 READJUSTING FOOT LEVELS Now that the dishwasher is in the cabinet you must readjust the feet to bring the dishwasher up to the required height and attach it underneath the countertop. 1. Readjust the front foot levels with adjusting wrench to balance the dishwasher and raise it up under the - EdgeStar DW18SS | Instruction Manual - Page 18
A o B t s C Lock the toe kick brackets as shown with the plastic tab in the figure C by pushing the plastic tab on the dishwasher into the teeth of the bracket (C). 3. Now attach the toe kick to the bracket with the two (Ø 3/16" x 1/4" - Ø 4mm x 6mm) screws and the caps provided as follows. If the - EdgeStar DW18SS | Instruction Manual - Page 19
? ? 7.5 INSTALLING THE OUTER DOOR (DWS 54100 FBI) Measure the height and width of the enclosure (Figure A) and the toe kick. Determine how big the wooden door can be. For example if the height is 337/8" (860mm) and if the toe kick is 315/16" (100mm) the door can not be taller than 2915/16" (760mm - EdgeStar DW18SS | Instruction Manual - Page 20
4. Place the plastic mounting brackets over the marked holes and the side tabs must be flush with the edge of D the wooden door (Figure D). D Ø 1/8" (3,5mm) x4 v 5. Attach the two mounting brackets to the wooden door with 4 screws (Ø 1/8" x 5/8" (Ø 3.5mm x 14mm) (Figure A). A 6. Mount the - EdgeStar DW18SS | Instruction Manual - Page 21
7. Open the door and remove the two caps and two screws inside the door at position 1 and 3 (Figure C). x4 Ø 3/16" (4mm) y C 8. Using the four screws Ø 3/16" x 111/16" (Ø 4mm x 43mm) provided, attach the wooden door to the dishwasher at position 1 and 3 (Figure A). A 9. Check the position of the - EdgeStar DW18SS | Instruction Manual - Page 22
A B 11. Check whether the bottom of the door hits the toe kick of the kitchen cabinet (A). 11.1. If the door hits the toe kick cut the necessary section out of the toe kick (B). 11.2. Apply silicon or sealant to the cut edge of the kitchen cabinet toe kick or paint so it does not absorb moisture. - EdgeStar DW18SS | Instruction Manual - Page 23
want to install a wooden toe kick to match your kitchen, please refer to one of the two drawings given below. Follow the same instructions on the brackets as for the removable toe kick. Installation should be done following the steps illustrated in the figures A, B, C, D respectively. B See also - EdgeStar DW18SS | Instruction Manual - Page 24
. • The manufacturer warranty does not cover installation, conversion or customer education service visits. 9. FINAL INSTRUCTIONS 1. Press the On/Off button to turn the dishwasher on. 2. Power make a copy of your invoice and keep it with this manual and register your dishwasher on-line. 21 USA - EdgeStar DW18SS | Instruction Manual - Page 25
17 9872 01 00-AA-USA
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
 |
 |
�±²±³±´±µ±¶±¶±·±³±¸±¹±º
Installation Manual
Dishwasher
USA