Edimax 3G-6200nL V2 Manual

Edimax 3G-6200nL V2 Manual

Get Edimax 3G-6200nL V2 PDF manuals and user guides View all Edimax 3G-6200nL V2 manuals
Add to My Manuals
Save this manual to your list of manuals

Edimax 3G-6200nL V2 manual content summary:

  • Edimax 3G-6200nL V2 | Manual - Page 1
    3G-6200nL V2 User Manual 05-2012 / v1.0
  • Edimax 3G-6200nL V2 | Manual - Page 2
    and the setup screen may appear slightly different from those shown in this QIG. For more information about this product, please refer to the user manual on the CD-ROM. The software and specifications are subject to change without notice. Please visit our website www.edimax.com for updates. All
  • Edimax 3G-6200nL V2 | Manual - Page 3
    3-1-2 Password Settings...40 3-1-3 Remote Management...41 3-2 WAN...42 3-2-1 3G/3.75G ...43 3-2-2 Dynamic IP ...45 3-2-3 Static IP ...46 3-2-4 PPPoE...47 3-2-5 PPTP...49 3-2-6 L2TP ...52 3-2-7 WISP...55 3-3 LAN...57 3-3-1 LAN IP...57 3-3-2 DHCP Server...59 3-3-3 Static DHCP Leases ...60 3-4 Wireless
  • Edimax 3G-6200nL V2 | Manual - Page 4
    Address Filtering ...68 3-4-4 WPS (Wi-Fi Protected Setup) Settings 70 3-5 Advance Settings...71 3-5-1 QoS ...72 3-5-4 DMZ ...80 3-5-5 Fail Over...81 3-5-6 3G Limit Control...82 3-6 NAT ...84 3-6-1 Virtual 4-2 Tools...105 4-2-1 Configuration Tools ...106 4-2-2 Firmware Upgrade...107 4-2-3 Restart ...
  • Edimax 3G-6200nL V2 | Manual - Page 5
    if there is anything missing in the package, and contact your dealer to claim the missing item(s):  3G router (1 pcs)  Quick installation guide (1 pcs)  CD (EZmax wizard, User Manual & Multi-Language QIG) (1 pcs)  Power adapter (1 pcs)  Ethernet cable (1 pcs)  Antenna (1 pcs) 1-2 Hardware LED
  • Edimax 3G-6200nL V2 | Manual - Page 6
    activity (transferring data) Item Name USB Port WPS/Reset Button Antenna Connector Power Connector LAN Port WAN Port Description Connects to 3G/3.75G USB modem cards Resets the router to factory default settings or activates the WPS function (press this button and hold for 20 seconds to clear all
  • Edimax 3G-6200nL V2 | Manual - Page 7
    : 1. Plug your 3G/3.75G USB modem card into the USB port on this router. 2. Connect your computer to one of the router's "LAN" ports. 3. Power on the router and insert the installation CD into your computer. Select your preferred language in the setup wizard and start configuring your router. 6
  • Edimax 3G-6200nL V2 | Manual - Page 8
    to use dynamic IP addresses). If your computer is set to use a static IP address, or if you are unsure, please follow the following instructions to configure your computer to use dynamic IP addresses:  Windows 95/98/Me  Windows 2000  Windows XP  Windows Vista (see section 2-2-1) (see section
  • Edimax 3G-6200nL V2 | Manual - Page 9
    2-2-1 Windows 95/98/Me IP address setup 1. Click the "Start" button (it should be located at the lower-left corner of your screen), then click "Control Panel". Double-click the "Network" icon, and the "Network" window will appear. Select "TCP/IP", and then click "Properties". 8
  • Edimax 3G-6200nL V2 | Manual - Page 10
    2. Select "Obtain an IP address from a DHCP server", then click "OK". 9
  • Edimax 3G-6200nL V2 | Manual - Page 11
    2-2-2 Windows 2000 IP address setup 1. Click the "Start" button (it should be located at the lower-left corner of your screen), then click "Control Panel". Double-click the "Network and
  • Edimax 3G-6200nL V2 | Manual - Page 12
    2. Select "Obtain an IP address automatically" and "Obtain DNS server address automatically", then click "OK". 11
  • Edimax 3G-6200nL V2 | Manual - Page 13
    2-2-3 Windows XP IP address setup 1. Click the "Start" button (it should be located at the lower-left corner of your screen), then click "Control Panel". Double-click the "Network and
  • Edimax 3G-6200nL V2 | Manual - Page 14
    2. Select "Obtain an IP address automatically" and "Obtain DNS server address automatically", then click "OK". 13
  • Edimax 3G-6200nL V2 | Manual - Page 15
    2-2-4 Windows Vista IP address setup 1. Click the "Start" button (it should be located at the lower-left corner of your screen), then click "Control Panel". Click "View Network Status and
  • Edimax 3G-6200nL V2 | Manual - Page 16
    2. Select "Obtain an IP address automatically" and "Obtain DNS server address automatically", then click "OK". 15
  • Edimax 3G-6200nL V2 | Manual - Page 17
    the IP address you have inputted may be incorrect. If you have previously changed the router's IP address, please input the one you have designated. 3. Please input "admin" in the "User name" field and "1234" in the "Password" field. Click the "OK" button to enter the web configuration interface. 16
  • Edimax 3G-6200nL V2 | Manual - Page 18
    system information here. System Model Displays this broadband router's model name (useful when you need technical service) Up Time Displays the amount of time this router has been switched on Hardware Version Displays this broadband router's hardware version (useful when you need technical
  • Edimax 3G-6200nL V2 | Manual - Page 19
    75G connection Displays the subnet mask of the 3G/3.75G connection Displays the IP address of the 3G/3.75G connection's default gateway Wireless Configuration Mode ESSID Channel Number Security Displays the operation mode of the wireless access point Displays the name of the access point Displays
  • Edimax 3G-6200nL V2 | Manual - Page 20
    If this router's DHCP server function is enabled, please follow the following instructions to find this router's IP address: 1. Click the "Start" button, then click "Run". 2. Input "cmd", and then click "OK". 19
  • Edimax 3G-6200nL V2 | Manual - Page 21
    the IP address following "Default Gateway" to access this router's web-based configuration interface. Please note that the IP address you find cable connection between the computer and the router.  Go to the beginning of this chapter and recheck every step of the setup procedure.  If both of the
  • Edimax 3G-6200nL V2 | Manual - Page 22
    2-4 Using "Quick Setup" This broadband router's "Quick Setup" allows you to set up basic parameters in a few simple steps. The following instructions illustrate how to use the "Quick Setup" menu: 1. Click "Quick Setup" after logging in. 2. Configure automatic time synchronization settings, and then
  • Edimax 3G-6200nL V2 | Manual - Page 23
    3. Choose your Internet connection type. Refer to the following list for further instructions:  3G/3.75G  Dynamic IP  Static IP  PPPoE  PPTP  L2TP  WISP (See section 2-4-1) (See you are not sure which your Internet connection type is, please contact your Internet service provider. 22
  • Edimax 3G-6200nL V2 | Manual - Page 24
    want to access the Internet via a 3G/3.75G USB modem card, select "3G/3.75G Settings". Item Name Country ISP PIN Code APN User ID Password Verify Password Service AT Dial Script Description Select your country or region here. Select your Internet service provider here. Please input the pin code
  • Edimax 3G-6200nL V2 | Manual - Page 25
    Note 2: A 3G/3.75G connection and an xDSL/cable connection cannot be used at the same time. When both types are connected to the router, the router will prioritize the 3G/3.75G connection and will only switch to the xDSL/cable connection when the 3G/3.75G signal is weak. 24
  • Edimax 3G-6200nL V2 | Manual - Page 26
    If your Internet service provider assigns IP addresses to you automatically through DHCP (Dynamic Host Configuration Protocol), select " OK" to complete setup. 3. When the following message appears, click "Apply" to save the changes and restart the broadband router. The router will take about
  • Edimax 3G-6200nL V2 | Manual - Page 27
    : You must use the addresses provided by your ISP. Inputting incorrect values will cause malfunction. 2. Click "OK" to complete setup. 3. When the following message appears, click "Apply" to save the changes and restart the broadband router. The router will take about 60 seconds to restart. 26
  • Edimax 3G-6200nL V2 | Manual - Page 28
    type 1. If your ISP is providing you Internet access via PPPoE (Point-to-Point Protocol over Ethernet), select "PPPoE". Item Name User Name Password MAC Address DNS Address DNS Address 1 and 2 TTL Service Name MTU Connection Type Description Input the user name assigned by your ISP here. Input the
  • Edimax 3G-6200nL V2 | Manual - Page 29
    only connects to the Internet when you initiate Internet connection. 3. "Manual" connects to the Internet only when the "Connect" button on "OK" to complete setup. 3. When the following message appears, click "Apply" to save the changes and restart the broadband router. The router will take about 60
  • Edimax 3G-6200nL V2 | Manual - Page 30
    2-4-5 Using "PPTP" as broadband connection type 1. Select "PPTP" if your ISP is providing you Internet access via PPTP (Point-to-Point Tunneling Protocol). 2. If your ISP is providing you dynamic IP addresses, select "Obtain an IP address automatically". If your ISP is providing you a static IP
  • Edimax 3G-6200nL V2 | Manual - Page 31
    to do so. NOTE: These settings must be configured according to your Internet service. Please contact your Internet service provider if you are not sure what to select. 3. Configure the "PPTP Settings" section. Item Name User ID Password PPTP Gateway Connection ID MTU BEZEQ-ISRAEL Connection Type
  • Edimax 3G-6200nL V2 | Manual - Page 32
    the "Disconnect" button is clicked. Specify the amount of time the router waits before shutting down an idle connection. This option is only available when "Connect on Demand" is selected. 4. Click "OK" to complete setup. 5. When the following message appears, click "Apply" to save the changes
  • Edimax 3G-6200nL V2 | Manual - Page 33
    2-4-6 Using "L2TP" as broadband connection type 1. Select "L2TP" if your ISP is providing you Internet access via L2TP (Layer-2 Tunneling Protocol). 2. If your ISP is providing you dynamic IP addresses, select "Obtain an IP address automatically". If your ISP is providing you a static IP address,
  • Edimax 3G-6200nL V2 | Manual - Page 34
    configured according to your Internet service. Please contact your Internet service provider if you are not sure what to select. 3. Configure the "L2TP Settings" section. Item Name User ID Password Internet connection. 3. "Manual" connects to the amount of time the router waits before shutting down
  • Edimax 3G-6200nL V2 | Manual - Page 35
    5. When the following message appears, click "Apply" to save the changes and restart the broadband router. The router will take about 60 seconds to restart. 34
  • Edimax 3G-6200nL V2 | Manual - Page 36
    points will be shown in the window. Select a wireless access point from the list, and click "Done" to establish a connection. Clicking "Refresh" will renew the list. Configure the security settings in accordance to your Internet service provider's requirements. 2. Click "OK" to complete setup. 35
  • Edimax 3G-6200nL V2 | Manual - Page 37
    3. When the following message appears, click "Apply" to save the changes and restart the broadband router. The router will take about 60 seconds to restart. 36
  • Edimax 3G-6200nL V2 | Manual - Page 38
    SETUP You can perform advanced configuration of this broadband router in "General Setup". 1. Click "General Setup" after logging in. 2. All available setup items will appear under the "General Setup" tab. 3. Refer to the following list for further instructions:  System  WAN  LAN  Wireless
  • Edimax 3G-6200nL V2 | Manual - Page 39
    3-1 System You can set up basic system settings under "System". You can configure your time zone, password, and remote management settings here. After you have completed the configurations, click "Apply" to save the changes. 38
  • Edimax 3G-6200nL V2 | Manual - Page 40
    time zone is the same as yours. This router supports NTP (Network Time Protocol) for automatic time and date setup. Input the host name or IP address of the restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 39
  • Edimax 3G-6200nL V2 | Manual - Page 41
    password again for confirmation. Click "Apply" to save the changes. After you have clicked "Apply", you will see the following message: Click "Apply" to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure
  • Edimax 3G-6200nL V2 | Manual - Page 42
    " to save the changes. After you have clicked "Apply", you will see the following message: Click "Apply" to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 41
  • Edimax 3G-6200nL V2 | Manual - Page 43
    3-2 WAN You can set up your Internet or WAN (Wide Area Network) connection under "WAN". Select a connection type and proceed with the setup; then click "Apply" to save the changes. If you are not sure which connection type you should use, please contact your Internet service provider for help. 42
  • Edimax 3G-6200nL V2 | Manual - Page 44
    want to access the Internet via a 3G/3.75G USB modem card, select "3G/3.75G Settings". Item Name Country ISP PIN Code APN User ID Password Verify Password Service AT Dial Script Description Select your country or region here. Select your Internet service provider here. Please input the pin code
  • Edimax 3G-6200nL V2 | Manual - Page 45
    Click "Apply" to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. Note 2: A 3G/3.75G connection and an xDSL/cable connection cannot be used at the same time. When both types are connected
  • Edimax 3G-6200nL V2 | Manual - Page 46
    Dynamic IP If your Internet service provider assigns IP addresses to you automatically through DHCP (Dynamic Host Configuration Protocol), select "Dynamic IP restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 45
  • Edimax 3G-6200nL V2 | Manual - Page 47
    " to save the changes. After you have clicked "Apply", you will see the following message: Click "Apply" to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 46
  • Edimax 3G-6200nL V2 | Manual - Page 48
    PPPoE If your ISP is providing you Internet access via PPPoE (Point-to-Point Protocol over Ethernet), select "PPPoE". Item Name User Name Password MAC Address DNS Address DNS Address 1 and 2 TTL Service Name MTU Connection Type Description Input the user name assigned by your ISP here. Input the
  • Edimax 3G-6200nL V2 | Manual - Page 49
    Demand" only connects to the Internet when you initiate Internet connection. 3. "Manual" connects to the Internet only when the "Connect" button on this page restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 48
  • Edimax 3G-6200nL V2 | Manual - Page 50
    3-2-5 PPTP Select "PPTP" if your ISP is providing you Internet access via PPTP (Point-to-Point Tunneling Protocol). If your ISP is providing you dynamic IP addresses, select "Obtain an IP address automatically". If your ISP is providing you a static IP address, select "Use the following IP address".
  • Edimax 3G-6200nL V2 | Manual - Page 51
    you to do so. NOTE: These settings must be configured according to your Internet service. Please contact your Internet service provider if you are not sure what to select. Configure the "PPTP Settings" section. Item Name User ID Password PPTP Gateway Connection ID MTU BEZEQ-ISRAEL Connection Type
  • Edimax 3G-6200nL V2 | Manual - Page 52
    Idle Time Out Specify the amount of time the router waits before shutting down an idle connection. This option is Click "Apply" to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 51
  • Edimax 3G-6200nL V2 | Manual - Page 53
    3-2-6 L2TP Select "L2TP" if your ISP is providing you Internet access via L2TP (Layer-2 Tunneling Protocol). If your ISP is providing you dynamic IP addresses, select "Obtain an IP address automatically". If your ISP is providing you a static IP address, select "Use the following IP address". Item
  • Edimax 3G-6200nL V2 | Manual - Page 54
    configured according to your Internet service. Please contact your Internet service provider if you are not sure what to select. Configure the "L2TP Settings" section. Item Name User ID Password initiate Internet connection. 3. "Manual" connects to the Internet the router waits before shutting down an
  • Edimax 3G-6200nL V2 | Manual - Page 55
    Click "Apply" to save the changes. After you have clicked "Apply", you will see the following message: Click "Apply" to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 54
  • Edimax 3G-6200nL V2 | Manual - Page 56
    appear. All reachable wireless access points will be shown in the window. Select a wireless access point from the list, and click "Done" to establish a connection. Clicking "Refresh" will renew the list. Configure the security settings in accordance to your Internet service provider's requirements
  • Edimax 3G-6200nL V2 | Manual - Page 57
    Click "Apply" to save the changes. After you have clicked "Apply", you will see the following message: Click "Apply" to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 56
  • Edimax 3G-6200nL V2 | Manual - Page 58
    3-3 LAN You can configure your local area network under "LAN". Refer to the following list for further instructions:  LAN IP (See section 3-3-1)  DHCP Server (See section 3-3-2)  Static DHCP Leases (See section 3-3-3) 3-3-1 LAN IP You can assign the LAN interface's IP address under "LAN IP
  • Edimax 3G-6200nL V2 | Manual - Page 59
    If you are not sure what to fill, here are some recommended values:  IP Address: "192.168.1.254"  Subnet Mask: "255.255.255.0"  802.1d Spanning Tree: "Disabled"  DHCP Server: "Enabled"  Lease Time: "Two Weeks" or "Forever" 58
  • Edimax 3G-6200nL V2 | Manual - Page 60
    3-3-2 DHCP Server You can set the range of IP address leases under "DHCP Server". Item Name Start IP End IP Domain Name Default Gateway Address Description Enter the start IP address for the DHCP server's IP assignment. Enter the end IP address for the DHCP server's IP assignment. You can input a
  • Edimax 3G-6200nL V2 | Manual - Page 61
    3-3-3 Static DHCP Leases You can set the router to assign a static IP address to specified computers/devices under "Static DHCP Leases". Item Name Enable Static DHCP Leases MAC Address IP Address Add Clear
  • Edimax 3G-6200nL V2 | Manual - Page 62
    Click "Apply" to save the changes. After you have clicked "Apply", you will see the following message: Click "Apply" to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 61
  • Edimax 3G-6200nL V2 | Manual - Page 63
    can set up your Wi-Fi under "Wireless". 3-4-1 Wireless Settings Basic wireless settings can be configured here. Item Name Band Description Select from one of the following options: 2.4GHz (B): Allows 802.11b wireless network clients to connect to this router (maximum transfer rate 11Mbps). 2.4GHz
  • Edimax 3G-6200nL V2 | Manual - Page 64
    802.11g, and 802.11n wireless clients to connect to this router (recommended). This is the name of your router. You can type any alphanumerical changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 63
  • Edimax 3G-6200nL V2 | Manual - Page 65
    3-4-2 Security Settings Advanced security settings are available in certain modes to enhance connection security. 3-4-2-1 Disabled Connection encryption is disabled under this mode (not recommended). 3-4-2-2 WEP Selecting "WEP" enables WEP (Wired Equivalent Privacy) encryption. Item Name Key Length
  • Edimax 3G-6200nL V2 | Manual - Page 66
    here. Input the RADIUS server port here. Generally, it is "1812". Input the password of the RADIUS server here. Click "Apply" to save the changes, or click restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 65
  • Edimax 3G-6200nL V2 | Manual - Page 67
    Key Format Pre-shared Key Description Please select a WPA cipher suite supported by your wireless client. Available options are "WPA (TKIP)", "WPA2 (AES)", restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 66
  • Edimax 3G-6200nL V2 | Manual - Page 68
    IP address RADIUS Server Port RADIUS Server Password Description Please select a WPA cipher suite supported by your wireless client. Available options are "WPA the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 67
  • Edimax 3G-6200nL V2 | Manual - Page 69
    Filtering This function will help you prevent unauthorized users from connecting to your wireless router. Only those wireless devices whose MAC address matches the ones you have assigned here can gain access to your wireless router. Up to 20 MAC addresses can be assigned. To enable MAC address
  • Edimax 3G-6200nL V2 | Manual - Page 70
    " to discard the changes. After you have clicked "Apply", you will see the following message: Click "Apply" to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 69
  • Edimax 3G-6200nL V2 | Manual - Page 71
    secure connection between this broadband router and WPS-compatible wireless clients. Item Name Enable WPS WPS Status Self PIN Code SSID Authentication Mode Passphrase Key Config Mode Description Check this box to enable the WPS function. The status of the WPS configuration is displayed here. This
  • Edimax 3G-6200nL V2 | Manual - Page 72
    3-5 Advance Settings You can configure such advanced networking functions like QoS, DDNS, port forwarding, and DMZ under "Advanced Settings". 71
  • Edimax 3G-6200nL V2 | Manual - Page 73
    provides an efficient way for computers on the network to share the internet bandwidth with a promised quality of internet service. Without QoS, all computers and devices on the network will compete with each other to get internet bandwidth, and some applications which require guaranteed bandwidth
  • Edimax 3G-6200nL V2 | Manual - Page 74
    you don't have to input port range above. Select the protocol type here (TCP or UDP). Click 'add' button to add a new QoS rule (detailed instructions will be given below). If you want to erase all values you just entered. 73
  • Edimax 3G-6200nL V2 | Manual - Page 75
    you click 'Apply' button, you'll see the following messages: Please click 'Apply' to save changes you made and restart the broadband router, this requires about 60 seconds and the broadband router will stop responding (this is normal and is not malfunction). You can reconnect to this broadband
  • Edimax 3G-6200nL V2 | Manual - Page 76
    . It will be a problem when such user wants to provide services to other users on Internet, because their IP address will vary every time when connected to Internet, and other user will not be able to know the IP address they're using at a certain time. This router supports DDNS service of following
  • Edimax 3G-6200nL V2 | Manual - Page 77
    , please select 'Enabled'; otherwise please select 'Disabled' Select your DDNS service provider here. Input the domain name you've obtained from DDNS service provider. Input account or email of DDNS registration. Input DDNS service password or key. If your DDNS provider is 'DHIS', the settings will
  • Edimax 3G-6200nL V2 | Manual - Page 78
    After you click 'Apply' button, you'll see the following messages: Please click 'Apply' to save changes you made and restart the broadband router, this requires about 60 seconds and the broadband router will stop responding (this is normal and is not malfunction). You can reconnect to this broadband
  • Edimax 3G-6200nL V2 | Manual - Page 79
    uncheck this box to disable port forwarding. Input the IP address of the computer on local network which provides internet service. All computer names found by this broadband router on local network will be listed here. You can select the computer name and click '
  • Edimax 3G-6200nL V2 | Manual - Page 80
    After you click 'Apply' button, you'll see the following messages: Please click 'Apply' to save changes you made and restart the broadband router, this requires about 60 seconds and the broadband router will stop responding (this is normal and is not malfunction). You can reconnect to this broadband
  • Edimax 3G-6200nL V2 | Manual - Page 81
    3-5-4 DMZ Demilitarized Zone (DMZ) is a special area in your local network. This area resides in local network, and all computers in this area uses private IP address, too. But these private IP addresses are mapped to a certain Internet IP address, so other people on Internet can fully access those
  • Edimax 3G-6200nL V2 | Manual - Page 82
    Over WAN failure detection works by detecting the presence of traffic on the 3G modem link. If the link is idle for too long, the router will attempt to ping a target IP address. If the ping does not reply, the router assumes the link is down and attempts to fail over to the
  • Edimax 3G-6200nL V2 | Manual - Page 83
    allows you to set a limit to the amount of 3G data you use. When the "3G Limit Control" function is enabled and the amount of 3G data transmission exceeds the limit you have set, the router will stop accessing the Internet via the 3G USB modem. The "3G Limit Control" function measures the amount of
  • Edimax 3G-6200nL V2 | Manual - Page 84
    function. Date Set the date when the "Cumulative 3G Data" value resets. Cumulative 3G Data Assign a maximum download limit here. ( to save changes you made and restart the broadband router, this requires about 30 seconds and the broadband router will stop responding (this is normal and is not
  • Edimax 3G-6200nL V2 | Manual - Page 85
    supports four types of NAT functions, and the instructions of these functions will be given below. 3-6-1 Virtual Server This function allows you to redirect a port on Internet IP address (on WAN port) to a specified port of an IP address on local network, so you can setup an Internet service on
  • Edimax 3G-6200nL V2 | Manual - Page 86
    local network. Input the port number of the IP address which provides Internet service. Select the type of connection, TCP or UDP. If you're not save changes you made and restart the broadband router, this requires about 60 seconds and the broadband router will stop responding (this is normal and
  • Edimax 3G-6200nL V2 | Manual - Page 87
    for special applications, and uncheck this box to disable this support. Input the IP address of the computer which is going to use the special application. All computer names found by this broadband router on local network will be listed here. You can select the computer name and click '
  • Edimax 3G-6200nL V2 | Manual - Page 88
    use UDP port, leave it blank. You can input any text here to help you remember the purpose of this item. This is optional. This router comes with a numerous port mapping settings of network games. If the game you wish to set is listed here, you can select it from dropdown
  • Edimax 3G-6200nL V2 | Manual - Page 89
    3-6-3 UPnP Settings BR-6675nD broadband router supports UPnP (universal plug-and-play), which allows other network devices to communicate with this broadband router to exchange information about network capability for intercommunication. After you made your choice, please click 'Apply' button:
  • Edimax 3G-6200nL V2 | Manual - Page 90
    , these applications will not be able to communicate with their server when working with BR-6675nD broadband router. All applications that require ALG support and compatible with this broadband router is listed here. You can check all applications you will use on local computer. After you made
  • Edimax 3G-6200nL V2 | Manual - Page 91
    to access Internet. Item Name Enable Static Routing Destination LAN IP Subnet Mask Default Gateway Hop Count Interface Add Reset here. Input the hop count (the distance between destination network and this broadband router) here. Input the interface which leads to destination network. Click to add
  • Edimax 3G-6200nL V2 | Manual - Page 92
    After you click 'Apply' button, you'll see the following messages: Please click 'Apply' to save changes you made and restart the broadband router, this requires about 60 seconds and the broadband router will stop responding (this is normal and is not malfunction). You can reconnect to this broadband
  • Edimax 3G-6200nL V2 | Manual - Page 93
    Firewall You can configure the firewall functions under - ) or colon ( : ) are not required. (i.e. If the MAC address label of your wireless device indicates 'aa-bb-cc-dd-ee-ff' or 'aa:bb:cc:dd:ee:ff', just input ' and this broadband router will rescan for all computers attached to LAN port again. 92
  • Edimax 3G-6200nL V2 | Manual - Page 94
    Comment Add Reset You can input any text here as the comment of this MAC address, like 'ROOM 2A Computer' or anything. You can input up to 16 alphanumerical characters here. This is optional and you can leave it blank, however, it's recommended to use this field to write a comment for every MAC
  • Edimax 3G-6200nL V2 | Manual - Page 95
    be applied to this access control rule from the list: You can select multiple services here. If you wish to deny or allow all services of certain IP address(es), please select both 'TCP' and 'UDP'. If the service you wish to deny or allow is not listed, you can use 'User Define
  • Edimax 3G-6200nL V2 | Manual - Page 96
    the port range if this service. For a single port number, just input the number of service port (like '110'). If this service consists multiple continuous ports, you you made and restart the broadband router, this requires about 60 seconds and the broadband router will stop responding (this is
  • Edimax 3G-6200nL V2 | Manual - Page 97
    3-7-2 URL Blocking If you want to prevent computers in local network from accessing certain website (like pornography, violence, or anything you want to block), you can use this function to stop computers in local network from accessing the site you defined here. This function is useful for parents
  • Edimax 3G-6200nL V2 | Manual - Page 98
    After you click 'Apply' button, you'll see the following messages: Please click 'Apply' to save changes you made and restart the broadband router, this requires about 60 seconds and the broadband router will stop responding (this is normal and is not malfunction). You can reconnect to this broadband
  • Edimax 3G-6200nL V2 | Manual - Page 99
    Denial of Service (DoS) is a common attack measure, by transmitting a great amount of data or request to your Internet IP address and server, the Internet connection will become very slow, and server may stop responding because it is not capable to handle too much traffics. This router has a built
  • Edimax 3G-6200nL V2 | Manual - Page 100
    a lot of fake connection request to consume the memory of your server, and try to make your server become unusable. Check this box and the router will filter this kind of traffic out. If you need to specify the details of every DoS attack, please click 'Advanced Settings' button, and the
  • Edimax 3G-6200nL V2 | Manual - Page 101
    After you click 'Apply' button, you'll see the following messages: Please click 'Apply' to save changes you made and restart the broadband router, this requires about 60 seconds and the broadband router will stop responding (this is normal and is not malfunction). You can reconnect to this broadband
  • Edimax 3G-6200nL V2 | Manual - Page 102
    CHAPTER IV: STATUS, TOOLS & LANGUAGE 4-1 Status You can check how your router is currently operating under "Status". 1. Click the "Status" tab. 2. Basic system information will be shown under "System". More information can be found in the other
  • Edimax 3G-6200nL V2 | Manual - Page 103
    4-1-2 Device Status This page shows the current settings of your wired and wireless LAN. 4-1-3 System Log This page shows all logged system information. You can click "Save" to download the log file to your computer. You can also click "
  • Edimax 3G-6200nL V2 | Manual - Page 104
    4-1-4 Security Log This page shows all logged security-related information. You can click "Save" to download the log file to your computer. You can also click "Clear" to remove all logs, or click "Refresh" to reload the logs. 4-1-5 Active DHCP Client This page shows all current DHCP clients. You can
  • Edimax 3G-6200nL V2 | Manual - Page 105
    4-1-6 Statistics This page shows the statistical information of each network interface and the total system up time. 4-1-7 Modem Info This page shows the information of the connected 3G/3.75G modem card. 104
  • Edimax 3G-6200nL V2 | Manual - Page 106
    4-2 Tools This broadband router comes with several tools that help you backup the settings, upgrade the firmware, and restart the device. 1. Click the "Tools" tab. 2. You will be able to access the configuration tools, upgrade your firmware, or restart the router here. 105
  • Edimax 3G-6200nL V2 | Manual - Page 107
    here. You can also reset all settings to the factory default. 1. Click "Configuration Tools". Item Name Backup Settings Restore Settings Restore to Factory Default Description Click the "Save..." button to save the current settings on your computer as a "
  • Edimax 3G-6200nL V2 | Manual - Page 108
    use a wired Ethernet connection and not a wireless connection to upload the firmware file. Do not switch the broadband router or computer off while performing firmware upgrade. This will cause the broadband router to malfunction. 4-2-3 Restart If your broadband router is not functioning properly or
  • Edimax 3G-6200nL V2 | Manual - Page 109
    4-3 Language This broadband router's web-based user interface supports several languages. You can change the display language with the "Language" dropdown menu at the upper-right corner of the user interface. 108
  • Edimax 3G-6200nL V2 | Manual - Page 110
    109
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
3G-6200nL V2
User Manual
05-2012 / v1.0