Edimax 3G-6408n Manual

Edimax 3G-6408n Manual

Get Edimax 3G-6408n PDF manuals and user guides View all Edimax 3G-6408n manuals
Add to My Manuals
Save this manual to your list of manuals

Edimax 3G-6408n manual content summary:

  • Edimax 3G-6408n | Manual - Page 1
    3G-6408n User Manual 05-2012 / v1.0
  • Edimax 3G-6408n | Manual - Page 2
    entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Edimax Technology Co., Ltd. reserves about this product, please refer to the user manual on the CD-ROM. The software and specifications are subject to change without notice
  • Edimax 3G-6408n | Manual - Page 3
    10 2-2-3 Windows XP IP address setup 12 2-2-4 Windows Vista IP address setup 14 2-3 Connecting to broadband router via web browser 16 2-4 Using "Quick Setup"...21 2-4-1 Using "3G/3.75G" as broadband connection type 23 2-4-2 Using "Dynamic IP" as broadband connection type 25 2-4-3 Using "Static
  • Edimax 3G-6408n | Manual - Page 4
    78 3-5-3 Port Forwarding...81 3-5-4 DMZ ...83 3-5-5 Fail Over...84 3-5-6 3G Limit Control...85 3-6 NAT ...87 3-6-1 Virtual Server...87 3-6-2 Special Applications Modem Info...107 4-2 Tools...108 4-2-1 Configuration Tools ...109 4-2-2 Firmware Upgrade...110 4-2-3 Restart ...110 4-3 Language...111 3
  • Edimax 3G-6408n | Manual - Page 5
    anything missing in the package, and contact your dealer to claim the missing item(s):  3G router (1 pcs)  Quick installation guide (1 pcs)  CD with setup wizard, multi-language QIG & user manual (1 pcs)  Power adapter (1 pcs)  Ethernet cable (1 pcs)  Hardwire USB cable (1 pcs)  Holding base
  • Edimax 3G-6408n | Manual - Page 6
    Power Connector WAN Port 1-4 (LAN Ports) WPS/Reset Button Wi-Fi ON/OFF Switch Description Connects to 3G/3.75G USB Modem Cards Connects to the supplied power adapter Connects to cable/xDSL modems Connects to computer or other web devices Resets the router to factory default settings or starts WPS
  • Edimax 3G-6408n | Manual - Page 7
    SETUP 2-1 Establishing a network connection Please follow the following instructions to build a network connection between your new broadband router, computers, and other network devices: 1. Plug your 3G/3.75G USB modem card into the USB port on this router. 2. Connect your computer to one of the
  • Edimax 3G-6408n | Manual - Page 8
    to use dynamic IP addresses). If your computer is set to use a static IP address, or if you are unsure, please follow the following instructions to configure your computer to use dynamic IP addresses:  Windows 95/98/Me  Windows 2000  Windows XP  Windows Vista (see section 2-2-1) (see section
  • Edimax 3G-6408n | Manual - Page 9
    2-2-1 Windows 95/98/Me IP address setup 1. Click the "Start" button (it should be located at the lower-left corner of your screen), then click "Control Panel". Double-click the "Network" icon, and the "Network" window will appear. Select "TCP/IP", and then click "Properties". 8
  • Edimax 3G-6408n | Manual - Page 10
    2. Select "Obtain an IP address from a DHCP server", then click "OK". 9
  • Edimax 3G-6408n | Manual - Page 11
    2-2-2 Windows 2000 IP address setup 1. Click the "Start" button (it should be located at the lower-left corner of your screen), then click "Control Panel". Double-click the "Network and Dial-up Connections" icon, and then double-click "Local Area Connection". When the "Local Area Connection
  • Edimax 3G-6408n | Manual - Page 12
    2. Select "Obtain an IP address automatically" and "Obtain DNS server address automatically", then click "OK". 11
  • Edimax 3G-6408n | Manual - Page 13
    2-2-3 Windows XP IP address setup 1. Click the "Start" button (it should be located at the lower-left corner of your screen), then click "Control Panel". Double-click the "Network and Internet Connections" icon, click "Network Connections", then double-click "Local Area Connection". When the "Local
  • Edimax 3G-6408n | Manual - Page 14
    2. Select "Obtain an IP address automatically" and "Obtain DNS server address automatically", then click "OK". 13
  • Edimax 3G-6408n | Manual - Page 15
    2-2-4 Windows Vista IP address setup 1. Click the "Start" button (it should be located at the lower-left corner of your screen), then click "Control Panel". Click "View Network Status and Tasks", and then click "Manage Network Connections". Right-click "Local Area Network", then select "Properties".
  • Edimax 3G-6408n | Manual - Page 16
    2. Select "Obtain an IP address automatically" and "Obtain DNS server address automatically", then click "OK". 15
  • Edimax 3G-6408n | Manual - Page 17
    following authentication window: NOTE: If you cannot access the broadband router's web-based configuration interface, the IP address you have inputted may be incorrect. If you have previously changed the router's IP address, please input the one you have designated. 3. Please
  • Edimax 3G-6408n | Manual - Page 18
    system information here. System Model Displays this broadband router's model name (useful when you need technical service) Up Time Displays the amount of time this router has been switched on Hardware Version Displays this broadband router's hardware version (useful when you need technical
  • Edimax 3G-6408n | Manual - Page 19
    Address Subnet Mask Default Gateway Displays the status of the 3G/3.75G connection Displays the IP address of the 3G/3.75G connection Displays the subnet mask of the 3G/3.75G connection Displays the IP address of the 3G/3.75G connection's default gateway Wireless Configuration Mode ESSID Channel
  • Edimax 3G-6408n | Manual - Page 20
    If this router's DHCP server function is enabled, please follow the following instructions to find this router's IP address: 1. Click the "Start" button, then click "Run". 2. Input "cmd", and then click "OK". 19
  • Edimax 3G-6408n | Manual - Page 21
    Use the IP address following "Default Gateway" to access this router's web-based configuration interface. Please note that the IP the following procedures:  Recheck the cable connection between the computer and the router.  Go to the beginning of this chapter and recheck every step of the setup
  • Edimax 3G-6408n | Manual - Page 22
    " This broadband router's "Quick Setup" allows you to set up basic parameters in a few simple steps. The following instructions illustrate how to another country/region whose time zone is the same as yours. This router supports NTP (Network Time Protocol) for automatic time and date setup. Input the
  • Edimax 3G-6408n | Manual - Page 23
    3. Choose your Internet connection type. Refer to the following list for further instructions:  3G/3.75G  Dynamic IP  Static IP  PPPoE  PPTP  L2TP  WISP (See section 2-4-1) (See you are not sure which your Internet connection type is, please contact your Internet service provider. 22
  • Edimax 3G-6408n | Manual - Page 24
    3G/3.75G USB modem card, select "3G/3.75G Settings". Item Name Country ISP PIN Code APN User ID Password Verify Password Service AT Dial Script Description Select your country or region here. Select your Internet service the broadband router. The router will take about 30 seconds to restart. 23
  • Edimax 3G-6408n | Manual - Page 25
    Note 2: A 3G/3.75G connection and an xDSL/cable connection cannot be used at the same time. When both types are connected to the router, the router will prioritize the 3G/3.75G connection and will only switch to the xDSL/cable connection when the 3G/3.75G signal is weak. 24
  • Edimax 3G-6408n | Manual - Page 26
    Using "Dynamic IP" as broadband connection type 1. If your Internet service provider assigns IP addresses to you automatically through DHCP (Dynamic Host message appears, click "Apply" to save the changes and restart the broadband router. The router will take about 60 seconds to restart. 25
  • Edimax 3G-6408n | Manual - Page 27
    incorrect values will cause malfunction. 2. Click "OK" to complete setup. 3. When the following message appears, click "Apply" to save the changes and restart the broadband router. The router will take about 60 seconds to restart. 26
  • Edimax 3G-6408n | Manual - Page 28
    access via PPPoE (Point-to-Point Protocol over Ethernet), select "PPPoE". Item Name User Name Password MAC Address DNS Address DNS Address 1 and 2 TTL Service Name MTU Connection Type Description Input the user name assigned by your ISP here. Input the password assigned by your ISP here. If your
  • Edimax 3G-6408n | Manual - Page 29
    only connects to the Internet when you initiate Internet connection. 3. "Manual" connects to the Internet only when the "Connect" button on this the "Disconnect" button is clicked. Specify the amount of time the router waits before shutting down an idle connection. This option is only available
  • Edimax 3G-6408n | Manual - Page 30
    2-4-5 Using "PPTP" as broadband connection type 1. Select "PPTP" if your ISP is providing you Internet access via PPTP (Point-to-Point Tunneling Protocol). 2. If your ISP is providing you dynamic IP addresses, select "Obtain an IP address automatically". If your ISP is providing you a static IP
  • Edimax 3G-6408n | Manual - Page 31
    : These settings must be configured according to your Internet service. Please contact your Internet service provider if you are not sure what to select. only connects to the Internet when you initiate Internet connection. 3. "Manual" connects to the Internet only when the "Connect" button on this
  • Edimax 3G-6408n | Manual - Page 32
    Idle Time Out when the "Disconnect" button is clicked. Specify the amount of time the router waits before shutting down an idle connection. This option is only available when "Connect on Demand" is selected. 4. Click "OK" to complete setup. 5. When the
  • Edimax 3G-6408n | Manual - Page 33
    2-4-6 Using "L2TP" as broadband connection type 1. Select "L2TP" if your ISP is providing you Internet access via L2TP (Layer-2 Tunneling Protocol). 2. If your ISP is providing you dynamic IP addresses, select "Obtain an IP address automatically". If your ISP is providing you a static IP address,
  • Edimax 3G-6408n | Manual - Page 34
    according to your Internet service. Please contact your Internet service provider if you are Internet when you initiate Internet connection. 3. "Manual" connects to the Internet only when the button is clicked. Specify the amount of time the router waits before shutting down an idle connection. This
  • Edimax 3G-6408n | Manual - Page 35
    5. When the following message appears, click "Apply" to save the changes and restart the broadband router. The router will take about 60 seconds to restart. 34
  • Edimax 3G-6408n | Manual - Page 36
    points will be shown in the window. Select a wireless access point from the list, and click "Done" to establish a connection. Clicking "Refresh" will renew the list. Configure the security settings in accordance to your Internet service provider's requirements. 2. Click "OK" to complete setup. 35
  • Edimax 3G-6408n | Manual - Page 37
    3. When the following message appears, click "Apply" to save the changes and restart the broadband router. The router will take about 60 seconds to restart. 36
  • Edimax 3G-6408n | Manual - Page 38
    2-5 Using "iQoS" iQoS is Edimax's answer to the need for a quick and easy way to manage internet bandwidth. It's intuitive and friendly user interface allows you to arrange your bandwidth
  • Edimax 3G-6408n | Manual - Page 39
    : If this bandwidth detection function is not operating correctly, please perform the test with the bandwidth testing sites listed on the bottom right and enter the test results manually. 5. The icons near the bottom show the current priority order for various application types (from left to right
  • Edimax 3G-6408n | Manual - Page 40
    6. After you have arranged your application priorities, click the "Apply" button to enable it. The icons will be shown in the order of your preference after the device has restarted. 39
  • Edimax 3G-6408n | Manual - Page 41
    You can perform advanced configuration of this broadband router in "General Setup". 1. Click "General Setup" after logging in. 2. All available setup items will appear under the "General Setup" tab. 3. Refer to the following list for further instructions:  System  WAN  LAN  Wireless  Advance
  • Edimax 3G-6408n | Manual - Page 42
    3-1 System You can set up basic system settings under "System". You can configure your time zone, password, and remote management settings here. After you have completed the configurations, click "Apply" to save the changes. 41
  • Edimax 3G-6408n | Manual - Page 43
    your country or region. If you cannot find your country/region, please select another country/region whose time zone is the same as yours. This router supports NTP (Network Time Protocol) for automatic time and date setup. Input the host name or IP address of the NTP server here. If you do
  • Edimax 3G-6408n | Manual - Page 44
    default login password ("1234") here. It is advised to do so to prevent others from logging in to your router without permission. Item Name Current Password New Password Confirm Password Description Input the current password here. The default value is "1234". Input your new password
  • Edimax 3G-6408n | Manual - Page 45
    (from the Internet). Item Name Host Address Port Enabled Description Assign an IP address with which to access this router remotely. Assign a port number with which to access this router remotely. The default value is "8080". You can use any integer between 1 and 65534. Check this box to enable
  • Edimax 3G-6408n | Manual - Page 46
    3-2 WAN You can set up your Internet or WAN (Wide Area Network) connection under "WAN". Select a connection type and proceed with the setup; then click "Apply" to save the changes. If you are not sure which connection type you should use, please contact your Internet service provider for help. 45
  • Edimax 3G-6408n | Manual - Page 47
    want to access the Internet via a 3G/3.75G USB modem card, select "3G/3.75G Settings". Item Name Country ISP PIN Code APN User ID Password Verify Password Service AT Dial Script Description Select your country or region here. Select your Internet service provider here. Please input the pin code
  • Edimax 3G-6408n | Manual - Page 48
    to restart. Click "Continue" to configure other settings. Note 2: A 3G/3.75G connection and an xDSL/cable connection cannot be used at the same time. When both types are connected to the router, the router will prioritize the 3G/3.75G connection and will only switch to the xDSL/cable connection when
  • Edimax 3G-6408n | Manual - Page 49
    3-2-2 Dynamic IP If your Internet service provider assigns IP addresses to you automatically through DHCP (Dynamic : Click "Apply" to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 48
  • Edimax 3G-6408n | Manual - Page 50
    " to save the changes. After you have clicked "Apply", you will see the following message: Click "Apply" to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 49
  • Edimax 3G-6408n | Manual - Page 51
    access via PPPoE (Point-to-Point Protocol over Ethernet), select "PPPoE". Item Name User Name Password MAC Address DNS Address DNS Address 1 and 2 TTL Service Name MTU Connection Type Description Input the user name assigned by your ISP here. Input the password assigned by your ISP here. If your
  • Edimax 3G-6408n | Manual - Page 52
    only connects to the Internet when you initiate Internet connection. 3. "Manual" connects to the Internet only when the "Connect" button on this the "Disconnect" button is clicked. Specify the amount of time the router waits before shutting down an idle connection. This option is only available
  • Edimax 3G-6408n | Manual - Page 53
    3-2-5 PPTP Select "PPTP" if your ISP is providing you Internet access via PPTP (Point-to-Point Tunneling Protocol). If your ISP is providing you dynamic IP addresses, select "Obtain an IP address automatically". If your ISP is providing you a static IP address, select "Use the following IP address".
  • Edimax 3G-6408n | Manual - Page 54
    These settings must be configured according to your Internet service. Please contact your Internet service provider if you are not sure what to select. only connects to the Internet when you initiate Internet connection. 3. "Manual" connects to the Internet only when the "Connect" button on this
  • Edimax 3G-6408n | Manual - Page 55
    Idle Time Out Specify the amount of time the router waits before shutting down an idle connection. This option is Click "Apply" to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 54
  • Edimax 3G-6408n | Manual - Page 56
    3-2-6 L2TP Select "L2TP" if your ISP is providing you Internet access via L2TP (Layer-2 Tunneling Protocol). If your ISP is providing you dynamic IP addresses, select "Obtain an IP address automatically". If your ISP is providing you a static IP address, select "Use the following IP address". Item
  • Edimax 3G-6408n | Manual - Page 57
    your Internet service. Please contact your Internet service provider if you to the Internet when you initiate Internet connection. 3. "Manual" connects to the Internet only when the "Connect" button . Specify the amount of time the router waits before shutting down an idle connection. This option is
  • Edimax 3G-6408n | Manual - Page 58
    Click "Apply" to save the changes. After you have clicked "Apply", you will see the following message: Click "Apply" to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 57
  • Edimax 3G-6408n | Manual - Page 59
    that corresponds to that of your Internet service provider's wireless access point. Click "Select Site Survey" and a pop-up window will appear. All reachable wireless access points will be shown in the window. Select a wireless access point from the list, and click "Done" to establish a connection
  • Edimax 3G-6408n | Manual - Page 60
    Click "Apply" to save the changes. After you have clicked "Apply", you will see the following message: Click "Apply" to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 59
  • Edimax 3G-6408n | Manual - Page 61
    3-3 LAN You can configure your local area network under "LAN". Refer to the following list for further instructions:  LAN IP (See section 3-3-1)  DHCP Server (See section 3-3-2)  Static DHCP Leases can select "Forever" if you are using this broadband router with less than 30 computers. 60
  • Edimax 3G-6408n | Manual - Page 62
    If you are not sure what to fill, here are some recommended values:  IP Address: "192.168.1.254"  Subnet Mask: "255.255.255.0"  802.1d Spanning Tree: "Disabled"  DHCP Server: "Enabled"  Lease Time: "Two Weeks" or "Forever" 61
  • Edimax 3G-6408n | Manual - Page 63
    3-3-2 DHCP Server You can set the range of IP address leases under "DHCP Server". Item Name Start IP End IP Domain Name Default Gateway Address Description Enter the start IP address for the DHCP server's IP assignment. Enter the end IP address for the DHCP server's IP assignment. You can input a
  • Edimax 3G-6408n | Manual - Page 64
    3-3-3 Static DHCP Leases You can set the router to assign a static IP address to specified computers/devices under "Static DHCP Leases". Item Name Enable Static DHCP Leases Table". Click "Clear" to clear the MAC address and IP address fields. All the assigned entries will be listed as follows: 63
  • Edimax 3G-6408n | Manual - Page 65
    Click "Apply" to save the changes. After you have clicked "Apply", you will see the following message: Click "Apply" to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 64
  • Edimax 3G-6408n | Manual - Page 66
    following options: 2.4GHz (B): Allows 802.11b wireless network clients to connect to this router (maximum transfer rate 11Mbps). 2.4GHz (N): Allows 802.11n wireless network clients to connect to this router (maximum transfer rate 450Mbps). 2.4GHz (B+G): Allows 802.11b and 802.11g wireless network
  • Edimax 3G-6408n | Manual - Page 67
    (recommended). This is the name of your router. You can type any alphanumerical character here (maximum 32 characters). Select a channel from the dropdown menu. You can select the channel of your preference (1 to 13). Click "Show Active Clients" for the list of all connected wireless clients. Click
  • Edimax 3G-6408n | Manual - Page 68
    3-4-2 Security Settings Advanced security settings are available in certain modes to enhance connection security. 3-4-2-1 Disabled Connection encryption is disabled under this mode (not recommended). 3-4-2-2 WEP Selecting "WEP" enables WEP (Wired Equivalent Privacy) encryption. Item Name Key Length
  • Edimax 3G-6408n | Manual - Page 69
    " to discard the changes. After you have clicked "Apply", you will see the following message: Click "Apply" to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 68
  • Edimax 3G-6408n | Manual - Page 70
    -Shared Key Format Pre-shared Key Description Please select a WPA cipher suite supported by your wireless client. Available options are "WPA (TKIP)", "WPA2 ( changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other
  • Edimax 3G-6408n | Manual - Page 71
    Server Port RADIUS Server Password Description Please select a WPA cipher suite supported by your wireless client. Available options are "WPA (TKIP)", "WPA2 and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings
  • Edimax 3G-6408n | Manual - Page 72
    ones you have assigned here can gain access to your wireless router. Up to 20 MAC addresses can be assigned. To enable MAC comment to the MAC address list. Click "Clear" to remove everything in the MAC address and comment fields. All MAC address entries will be listed in the following table: To
  • Edimax 3G-6408n | Manual - Page 73
    " to discard the changes. After you have clicked "Apply", you will see the following message: Click "Apply" to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 72
  • Edimax 3G-6408n | Manual - Page 74
    way to establish a secure connection between this broadband router and WPS-compatible wireless clients. Item Name Enable WPS WPS Status Self -button WPS configuration. You can also use the "WPS/Reset" button located at the back of this router. Input the WPS-enabled wireless client's PIN code and
  • Edimax 3G-6408n | Manual - Page 75
    3-5 Advance Settings You can configure such advanced networking functions like QoS, DDNS, port forwarding, and DMZ under "Advanced Settings". 74
  • Edimax 3G-6408n | Manual - Page 76
    provides an efficient way for computers on the network to share the internet bandwidth with a promised quality of internet service. Without QoS, all computers and devices on the network will compete with each other to get internet bandwidth, and some applications which require guaranteed bandwidth
  • Edimax 3G-6408n | Manual - Page 77
    IP Address Local Port Range Remote IP Address Remote Port Range Traffic Type Protocol Add Reset (1) (2) (3) (1) Please select Download / Upload for the direction of data for this add a new QoS rule (detailed instructions will be given below). If you want to erase all values you just entered. 76
  • Edimax 3G-6408n | Manual - Page 78
    Up Move Down Click 'Reset' If you want to clicked. By clicking this button, you can delete all rules currently listed in the QoS table. If the QoS table is empty, this you made and restart the broadband router, this requires about 60 seconds and the broadband router will stop responding (this is
  • Edimax 3G-6408n | Manual - Page 79
    . It will be a problem when such user wants to provide services to other users on Internet, because their IP address will vary every time when connected to Internet, and other user will not be able to know the IP address they're using at a certain time. This router supports DDNS service of following
  • Edimax 3G-6408n | Manual - Page 80
    , please select 'Enabled'; otherwise please select 'Disabled' Select your DDNS service provider here. Input the domain name you've obtained from DDNS service provider. Input account or email of DDNS registration. Input DDNS service password or key. If your DDNS provider is 'DHIS', the settings
  • Edimax 3G-6408n | Manual - Page 81
    After you click 'Apply' button, you'll see the following messages: Please click 'Apply' to save changes you made and restart the broadband router, this requires about 60 seconds and the broadband router will stop responding (this is normal and is not malfunction). You can reconnect to this broadband
  • Edimax 3G-6408n | Manual - Page 82
    to disable port forwarding. Input the IP address of the computer on local network which provides internet service. All computer names found by this broadband router on local network will be listed here. You can select the computer name and click '
  • Edimax 3G-6408n | Manual - Page 83
    to delete all port forwarding entries listed here, please click 'Delete All' button or you can also click 'Reset' button to unselect all port forwarding changes you made and restart the broadband router, this requires about 60 seconds and the broadband router will stop responding (this is normal and
  • Edimax 3G-6408n | Manual - Page 84
    on Internet can fully access those computers in DMZ. Item Name Enable DMZ Public IP address Client PC IP address Type Port Range Comment Add Reset Description Check this box to enable DMZ function, uncheck this box to disable DMZ function. You can select 'Dynamic IP' or 'Static IP' here. If
  • Edimax 3G-6408n | Manual - Page 85
    If you want to delete all DMZ entries listed here, please click 'Delete All' button or you can also click 'Reset' button to unselect all DMZ entries. When you 3G modem link. If the link is idle for too long, the router will attempt to ping a target IP address. If the ping does not reply, the router
  • Edimax 3G-6408n | Manual - Page 86
    exceeds the limit you have set, the router will stop accessing the Internet via the 3G USB modem. The "3G Limit Control" function measures the amount of 3G data transmission in months. For example, if you select "19", the "Cumulative 3G Data" value will reset on the 19th of every month. The
  • Edimax 3G-6408n | Manual - Page 87
    function. Date Set the date when the "Cumulative 3G Data" value resets. Cumulative 3G Data Assign a maximum download limit here. ( to save changes you made and restart the broadband router, this requires about 30 seconds and the broadband router will stop responding (this is normal and is not
  • Edimax 3G-6408n | Manual - Page 88
    get connected to Internet. This broadband router supports four types of NAT functions, and the instructions of these functions will be given below the computer which provides Internet service. All computer names found by this broadband router on local network will be listed here. You can select the
  • Edimax 3G-6408n | Manual - Page 89
    Reset Please note that this list may not be able to list all computers on your local network. Input the port number of the IP address which provides Internet service you made and restart the broadband router, this requires about 60 seconds and the broadband router will stop responding (this is
  • Edimax 3G-6408n | Manual - Page 90
    for special applications, and uncheck this box to disable this support. Input the IP address of the computer which is going to use the special application. All computer names found by this broadband router on local network will be listed here. You can select the computer name and click '
  • Edimax 3G-6408n | Manual - Page 91
    help you remember the purpose of this item. This is optional. This router comes with a numerous port mapping settings of network games. If the game you wish to set is listed here, you can select it from dropdown menu. Add Reset After a game is selected, click 'Add' (the one next to 'Select Game
  • Edimax 3G-6408n | Manual - Page 92
    3-6-3 UPnP Settings BR-6675nD broadband router supports UPnP (universal plug-and-play), which allows other network devices to communicate with this broadband router to exchange information about network capability for intercommunication. After you made your choice, please click 'Apply' button:
  • Edimax 3G-6408n | Manual - Page 93
    , these applications will not be able to communicate with their server when working with BR-6675nD broadband router. All applications that require ALG support and compatible with this broadband router is listed here. You can check all applications you will use on local computer. After you made your
  • Edimax 3G-6408n | Manual - Page 94
    Input the hop count (the distance between destination network and this broadband router) here. Input the interface which leads to destination network. Click to static route entries listed here, please click 'Delete All' button or you can also click 'Reset' button to unselect all static route entries.
  • Edimax 3G-6408n | Manual - Page 95
    After you click 'Apply' button, you'll see the following messages: Please click 'Apply' to save changes you made and restart the broadband router, this requires about 60 seconds and the broadband router will stop responding (this is normal and is not malfunction). You can reconnect to this broadband
  • Edimax 3G-6408n | Manual - Page 96
    'aa-bb-cc-dd-ee-ff' or 'aa:bb:cc:dd:ee:ff', just input 'aabbccddeeff' All computer names found by this broadband router on local network will be listed here. You can select the computer name and click '
  • Edimax 3G-6408n | Manual - Page 97
    page: To delete one or more entries listed here, please check the box of the mapping entry (under 'Select'), and click 'Delete Selected' button. If you wish to delete all mapping entries, click 'Delete All' button. To deselect all checked boxes, click 'Reset' button. You can restrict computers in
  • Edimax 3G-6408n | Manual - Page 98
    define a single IP address. You also have to select the type of Internet services that will be applied to this access control rule from the list: You can select multiple services here. If you wish to deny or allow all services of certain IP address(es), please select both 'TCP' and 'UDP'. If the
  • Edimax 3G-6408n | Manual - Page 99
    '110'). If this service consists multiple continuous ports, you can input '110-120' for port number 110 to 120, or '110,115,120' for port number 110, 115, and 120. Click 'Add' to add this IP address restriction rule to the list (and back to previous page), or click 'Reset' to clear all
  • Edimax 3G-6408n | Manual - Page 100
    for parents and company managers. Item Name Enable URL Blocking URL/Keyword Add Reset Description Check this box to enforce URL Blocking, uncheck it to disable URL all URL/Keyword listed here, please click 'Delete All' button, or you can also click 'Reset' button to unselect all URL/Keywords. 99
  • Edimax 3G-6408n | Manual - Page 101
    After you click 'Apply' button, you'll see the following messages: Please click 'Apply' to save changes you made and restart the broadband router, this requires about 60 seconds and the broadband router will stop responding (this is normal and is not malfunction). You can reconnect to this broadband
  • Edimax 3G-6408n | Manual - Page 102
    server may stop responding because it is not capable to handle too much traffics. This router has a built-in DoS attack prevention mechanism; when you activate it, the router will stop the DoS attack for you: Here lists four kinds of DoS attacks, please select the type of DoS attack you wish this
  • Edimax 3G-6408n | Manual - Page 103
    and try to make your server become unusable. Check this box and the router will filter this kind of traffic out. If you need to specify the details to activate this DoS prevention mechanism. Many kind of port scan methods are listed here, please check one or more DoS attack methods you want to
  • Edimax 3G-6408n | Manual - Page 104
    After you click 'Apply' button, you'll see the following messages: Please click 'Apply' to save changes you made and restart the broadband router, this requires about 60 seconds and the broadband router will stop responding (this is normal and is not malfunction). You can reconnect to this broadband
  • Edimax 3G-6408n | Manual - Page 105
    CHAPTER IV: STATUS, TOOLS & LANGUAGE 4-1 Status You can check how your router is currently operating under "Status". 1. Click the "Status" tab. 2. Basic system information will be shown under "System". More information can be found in the other
  • Edimax 3G-6408n | Manual - Page 106
    4-1-2 Device Status This page shows the current settings of your wired and wireless LAN. 4-1-3 System Log This page shows all logged system information. You can click "Save" to download the log file to your computer. You can also click "Clear" to remove all logs, or click "Refresh" to reload the
  • Edimax 3G-6408n | Manual - Page 107
    logs, or click "Refresh" to reload the logs. 4-1-5 Active DHCP Client This page shows all current DHCP clients. You can click "Refresh" to reload the list. 106
  • Edimax 3G-6408n | Manual - Page 108
    4-1-6 Statistics This page shows the statistical information of each network interface and the total system up time. 4-1-7 Modem Info This page shows the information of the connected 3G/3.75G modem card. 107
  • Edimax 3G-6408n | Manual - Page 109
    4-2 Tools This broadband router comes with several tools that help you backup the settings, upgrade the firmware, and restart the device. 1. Click the "Tools" tab. 2. You will be able to access the configuration tools, upgrade your firmware, or restart the router here. 108
  • Edimax 3G-6408n | Manual - Page 110
    backup and restore your system configurations here. You can also reset all settings to the factory default. 1. Click "Configuration Tools the current settings with the settings in the "config.bin" file. Click "Reset" to restore the settings to the factory default. A pop-up message window will appear and
  • Edimax 3G-6408n | Manual - Page 111
    or computer off while performing firmware upgrade. This will cause the broadband router to malfunction. 4-2-3 Restart If your broadband router is not functioning properly or responding slowly, restarting the broadband router may solve the problem. 1. Select "Reset". 2. Click the "Apply" button to
  • Edimax 3G-6408n | Manual - Page 112
    4-3 Language This broadband router's web-based user interface supports several languages. You can change the display language with the "Language" dropdown menu at the upper-right corner of the user interface. 111
  • Edimax 3G-6408n | Manual - Page 113
    112
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
3G-6408n
User Manual
05-2012 / v1.0