Edimax ES-3205P Quick Install Guide
Edimax ES-3205P Manual
 |
View all Edimax ES-3205P manuals
Add to My Manuals
Save this manual to your list of manuals |
Edimax ES-3205P manual content summary:
- Edimax ES-3205P | Quick Install Guide - Page 1
- Edimax ES-3205P | Quick Install Guide - Page 2
) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential damages Manual. The software and specifications are subject to change without notice. Please visit our web site www.edimax and used in accordance with the instructions, may cause harmful interference to - Edimax ES-3205P | Quick Install Guide - Page 3
and auto-negotiation. • Supports flow control: back pressure for half-duplex, IEEE 802.3x for full-duplex mode. • Automatic source address learning and aging, extensive front-panel diagnostic LEDs. Front Panel ES-3205P ES-3208P ES-3216P Fast Ethernet Switch LED Panel LED (Power) 1,2,3.... (Link - Edimax ES-3205P | Quick Install Guide - Page 4
humidity. 2. Connecting to network devices The RJ-45 ports on the switch support Auto-MDI/MDI-X function which allows using straight-through or the switch and connected device is 100 meters (300ft). Once the network cable is connected to both ends and the attached network device is powered on, - Edimax ES-3205P | Quick Install Guide - Page 5
LED on the front panel should be lit. Trouble Shooting 1. Power LED is not lit z Check if the power cord is properly connected to the external power adapter and the power outlet. Make sure the power jack is firmly plugged into the power socket of the switch. 2. Link/Activity is not lit when connect - Edimax ES-3205P | Quick Install Guide - Page 6
5
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
0