Edimax ES-3205P Manual
Edimax ES-3205P Manual
 |
View all Edimax ES-3205P manuals
Add to My Manuals
Save this manual to your list of manuals |
Edimax ES-3205P manual content summary:
- Edimax ES-3205P | Manual - Page 1
- Edimax ES-3205P | Manual - Page 2
) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential damages Manual. The software and specifications are subject to change without notice. Please visit our web site www.edimax and used in accordance with the instructions, may cause harmful interference to - Edimax ES-3205P | Manual - Page 3
and auto-negotiation. • Supports flow control: back pressure for half-duplex, IEEE 802.3x for full-duplex mode. • Automatic source address learning and aging, extensive front-panel diagnostic LEDs. Front Panel ES-3205P Fast Ethernet Switch LED Panel ES-3208P LED (Power) 1,2,3.... (Link/Activity - Edimax ES-3205P | Manual - Page 4
switching hub must be installed and operated within the limits of specified operating temperature (32-131°F) and humidity (10 ports on the switch support Auto- switch and connected device is 100 meters (300ft). Once the network cable is connected to both ends and the attached network device is powered - Edimax ES-3205P | Manual - Page 5
LED on the front panel should be lit. Trouble Shooting 1. Power LED is not lit z Check if the power cord is properly connected to the external power adapter and the power outlet. Make sure the power jack is firmly plugged into the power socket of the switch. 2. Link/Activity is not lit when connect - Edimax ES-3205P | Manual - Page 6
5
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
0