Edimax ET-913SFP V2 Quick Install Guide
Edimax ET-913SFP V2 Manual
 |
View all Edimax ET-913SFP V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Edimax ET-913SFP V2 manual content summary:
- Edimax ET-913SFP V2 | Quick Install Guide - Page 1
10/100/1000BaseT to 1000BaseSX/LX Media Converter Series User's Manual - Edimax ET-913SFP V2 | Quick Install Guide - Page 2
in a commercial environment. This equipment generates and radiates radio frequency energy and, if not installed and used in accordance with the user's manual, it may cause interference in which case users will be required to correct interference at their own expenses. CE Warning This is a Class - Edimax ET-913SFP V2 | Quick Install Guide - Page 3
any performance degradation. This Media Converter Series is based on the switching hub design. It supports Auto-Negotiation and Flow Control function on the twisted-pair port. Besides, it can provide contains the following items: One Media Converter One Power Adapter One User's Manual 3 - Edimax ET-913SFP V2 | Quick Install Guide - Page 4
1x 1000BaseSX/LX Gigabit Ethernet Fiber Port or 1x Gigabit SFP Open Slot Fiber port One SFP open slot can support either Multi-Mode or Single- Mode SFP Module TP Port can support Half/Full-Duplex Auto-MDI/MDI-X and Auto-Negotiation Adjustable DIP Switch for LLF/LFP function (Link Fault Pass - Edimax ET-913SFP V2 | Quick Install Guide - Page 5
II. TP port (RJ-45) The device TP port support Auto-MDIX, Auto-Negotiation and Flow Control functions. The cable length up to 100 meters is for Cat5, Cat5e or Cat6 shielded/unshielded twisted-pair - Edimax ET-913SFP V2 | Quick Install Guide - Page 6
connect. Note : Warning : When the setting of the DIP switch is changed, the power has to be turned off and the new setting will be effective after turned on again. 6 - Edimax ET-913SFP V2 | Quick Install Guide - Page 7
LEDs LED Indicators of Fast Ethernet Media Converter LED Power LINK/ACT 10/100M/ACT 1000M/ACT Status On On Flashing On Flashing On Flashing Connections Multi-Mode Fiber (MMF) Description Power on Fiber Link Data active Link on 10/100M Data active Link on 1000M Data active Single-Mode Fiber (SMF - Edimax ET-913SFP V2 | Quick Install Guide - Page 8
Technical Specifications Standards Features Data Transfer Rate Transmission Media IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3ab 1000BaseT IEEE 802.3z 1000BaseSX/LX IEEE 802.3x Flow Control Number of Port: 1 10/100/1000BaseT with RJ-45 Connector 1 Gigabit Fiber port with SC, ST, LC or SFP - Edimax ET-913SFP V2 | Quick Install Guide - Page 9
Led Indicators Power Requirement Power Consumption Dimensions Weight Operating Temperature Storage Temperature Humidity Certifications (TX):10/100M/ACT,1000M/ACT (FX): Link/ACT Per Unit: Power DC 5V 5 Watts (Max) 102 × 75 × 23 mm (L x W x H) 210 g 0 to 45℃ -20 to 90℃ 10 to 90% RH (non-condensing)
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
 |
 |
10/100/1000BaseT to 1000BaseSX/LX
Media Converter Series
User’s Manual