Edimax HP-5102AC Manual
Edimax HP-5102AC Manual
 |
View all Edimax HP-5102AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Edimax HP-5102AC manual content summary:
- Edimax HP-5102AC | Manual - Page 1
HP-5102AC User Manual 02-2013 / v1.0 - Edimax HP-5102AC | Manual - Page 2
entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Edimax Technology Co., Ltd. reserves about this product, please refer to the user manual on the CD-ROM. The software and specifications are subject to change without notice - Edimax HP-5102AC | Manual - Page 3
Tab ...22 4.3 About Tab...23 Chapter 5: Group Button ...24 5.1 Forming a HomePlug AV Logical Network 24 5.2 Joining a Network ...25 5.3 Leaving a Network & Joining another Network 26 Chapter 6: Troubleshooting ...27 2 - Edimax HP-5102AC | Manual - Page 4
Chapter 1: Introduction 1.1 Product Features Easy plug-n-play setup and 128-bit AES security Max. powerline speed up to 500Mbps Backward compatible with 200Mbps powerline adapters Features energy saving mode to reduce power consumption Utilizes existing electrical wires to transmit network - Edimax HP-5102AC | Manual - Page 5
with 14Mbps and 85Mbps powerline devices (HomePlug 1.0 and 1.1 standards). 1.4 System Requirements Operating System CPU RAM Free Disk Space Network Interface Utility supports Windows XP/Vista/7/8 Intel Pentium III 1.0GHz (or above) 256MB (or above) 100MB (or above) Ethernet port (100Mbps or above - Edimax HP-5102AC | Manual - Page 6
2.1 LED Definitions Chapter 2: About the Product LED Status Description Green LAN port connected LAN Blinking Off LAN activity (transferring data) LAN port not connected The green indicator turns on and the yellow indicator blinks slowly when the device is detecting a Green/Yellow - Edimax HP-5102AC | Manual - Page 7
2.2 Interface Interface Integrated Power Socket Ethernet Port Group/Reset Description The integrated electrical socket enables additional terminal devices or multiple socket to be connected to the adapter, just as a normal wall socket would. This is a Fast Ethernet port for connecting to a - Edimax HP-5102AC | Manual - Page 8
Chapter 3:Utility Software Installation 3.1 Win 8 Step 1 Before installing the utility software, make sure that no other powerline utility is installed on your computer. If any other utility software is installed, uninstall it and reboot the computer. Step 2 Insert the CD into your CD-ROM drive. - Edimax HP-5102AC | Manual - Page 9
Step 4 Click right button on WinPCap4.1.2 then click "Properties". Step 5 Click Compatibility tab and check "Run this program in compatibility mode for:", then select Windows 7, then click "Apply". 8 - Edimax HP-5102AC | Manual - Page 10
Step 6 Then click "WinPcap_4_1_2". The wizard will guide you through the setup process. Step 7 When the following WinPcap Compatibility Assistant appears, select Run the program without getting help. 9 - Edimax HP-5102AC | Manual - Page 11
10 - Edimax HP-5102AC | Manual - Page 12
Step 8 After the installation is complete, click "Finish". 11 - Edimax HP-5102AC | Manual - Page 13
Step 9 Click the "Edimax PowerLine Utility", the "PLC 500Mbps Utility" appears, click "Next" to continue. Step 10 Select where you want to install the utility software, and then click "Next". 12 - Edimax HP-5102AC | Manual - Page 14
Step 11 After the installation is complete, click "Close". 13 - Edimax HP-5102AC | Manual - Page 15
Step 12 An icon will appear on your desktop. Click the icon to open the utility software. Note: You can manage all the connected powerline adapters with the utility software. However, installing the utility software is optional. 14 - Edimax HP-5102AC | Manual - Page 16
3.2 Win XP/Vista / 7 Step 1 Before installing the utility software, make sure that no other powerline utility is installed on your computer. If any other utility software is installed, uninstall it and reboot the computer. Step 2 Insert the CD into your CD-ROM drive. When the following EZmax Wizard - Edimax HP-5102AC | Manual - Page 17
Step 4 If you have not installed WinPcap version 4.1.2 (or higher) on your computer before. The wizard will guide you through the setup process. 16 - Edimax HP-5102AC | Manual - Page 18
17 - Edimax HP-5102AC | Manual - Page 19
Step 5 When the "Edimax PowerLine Utility" setup wizard appears, click "Next" to continue. Step 6 In the "License Agreement" screen, please select "I Agree" and then click "Next" to continue. 18 - Edimax HP-5102AC | Manual - Page 20
Step 7 Select where you want to install the utility software, and then click "Next". Step 8 If you confirm to install the utility, click "Next". 19 - Edimax HP-5102AC | Manual - Page 21
Step 9 After the installation is complete, click "Close". Step 10 An icon will appear on your desktop. Click the icon to open the utility software. Note: You can manage all the connected powerline adapters with the utility software. However, installing the utility software is optional. 20 - Edimax HP-5102AC | Manual - Page 22
Chapter 4: Using the Utility Software 4.1 Main Tab The "Main" tab provides a list of powerline adapters connected to the network. The upper panel displays local powerline adapters. The lower panel displays remote powerline adapters in the network. Set Name Enter Password Scan Select a device and - Edimax HP-5102AC | Manual - Page 23
4.2 Diagnostics Tab The "Diagnostics" tab displays the system information and history of all remote devices. The upper panel displays technical data concerning the software and hardware on the host computer and the lower panel displays the history of all remote devices. 22 - Edimax HP-5102AC | Manual - Page 24
4.3 About Tab The "About" tab contains some basic information about the software. You can also enable or disable the autoscan function under "Preferences". 23 - Edimax HP-5102AC | Manual - Page 25
Chapter 5: Group Button This section demonstrates how to add or remove devices from a HomePlug AV network with the "Group" button. 5.1 Forming a HomePlug AV Logical Network When two devices with different group keys are connected to the same powerline and you want them to form a logical network, - Edimax HP-5102AC | Manual - Page 26
5.2 Joining a Network If you want to add a new powerline device to an existing network, follow the following procedures: Step 1 Press the "Group" button on an adapter in the existing network (adapter A or B) for less than 3 seconds. The Power LED will start to blink. Step 2 Within 120 seconds after - Edimax HP-5102AC | Manual - Page 27
5.3 Leaving a Network & Joining another Network If you want to remove a powerline device from an existing network and add it to another network, follow the following procedures: Step 1 Press the "Group" button on the adapter to be removed (adapter B) for at least 10 seconds. Step 2 Wait for adapter - Edimax HP-5102AC | Manual - Page 28
Chapter 6: Troubleshooting If your powerline adapters have difficulty communicating with each other, try the following procedures: Try power cycling the unit by unplugging it from the electric - Edimax HP-5102AC | Manual - Page 29
. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - Edimax HP-5102AC | Manual - Page 30
ää direktiivien 2004/108/EC, 2009/125/EC oleelliset vaatimukset ja muut asiaankuuluvat määräykset. WEEE Directive & Product Disposal At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for - Edimax HP-5102AC | Manual - Page 31
30
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
 |
 |
HP-5102AC
User Manual
02-2013 / v1.0