Edimax HP-5103 User Manual

Edimax HP-5103 Manual

Get Edimax HP-5103 PDF manuals and user guides View all Edimax HP-5103 manuals
Add to My Manuals
Save this manual to your list of manuals

Edimax HP-5103 manual content summary:

  • Edimax HP-5103 | User Manual - Page 1
    HP-5103 User Manual 03-2014 / v1.0
  • Edimax HP-5103 | User Manual - Page 2
    purchased and the setup screen may appear slightly different from those shown in this QIG. For more information about this product, please refer to the user manual on the CD-ROM. The software and specifications are subject to change without notice. Please visit our website www.edimax.com for updates
  • Edimax HP-5103 | User Manual - Page 3
    Chapter 4: Using the Utility Software ...20 4.1 Main Tab ...20 4.2 Diagnostics Tab ...21 4.3 About Tab...22 Chapter 5: Group Button ...23 5.1 Forming a HomePlug AV Logical Network 23 5.2 Joining a Network ...24 5.3 Leaving a Network & Joining another Network 25 Chapter 6: Troubleshooting ...26 2
  • Edimax HP-5103 | User Manual - Page 4
    Chapter 1: Introduction 1.1 Product Features  Easy plug-n-play setup and 128-bit AES security  Max. powerline speed up to 500Mbps  Backward compatible with 200Mbps powerline adapters  Features energy saving mode to reduce power consumption  Utilizes existing electrical wires to transmit network
  • Edimax HP-5103 | User Manual - Page 5
    1.3 Compatibility AV500 powerline devices (HomePlug AV standard) are incompatible and cannot be used with 14Mbps and 85Mbps powerline devices (HomePlug 1.0 and 1.1 standards). 1.4 System Requirements Operating System CPU RAM Free Disk Space Network Interface Utility supports Windows XP/Vista/7/8
  • Edimax HP-5103 | User Manual - Page 6
    data) LAN port not connected The green indicator turns on and the red indicator turns blinks slowly when the device is PLC Green/Red detecting a powerline link. The green indicator turns on and the red indicator turns blinks quickly to indicate data is being transferred over the
  • Edimax HP-5103 | User Manual - Page 7
    or other devices with a network port. Creates an encrypted powerline network group automatically (press the button for less than 3 seconds). Leaves an encrypted powerline network group (press the button for 5~8 seconds). Restores the powerline adapter to factory defaults (press the button for 10~15
  • Edimax HP-5103 | User Manual - Page 8
    software, make sure that no other powerline utility is installed on your computer. If any other utility software is installed, uninstall it and reboot the computer. Step 2 Insert the CD into your CD-ROM drive. When the following EZmax Wizard appears, select your model. Step 3 Then click "Setup
  • Edimax HP-5103 | User Manual - Page 9
    Step 4 Click right button on WinPCap4.1.2 then click "Properties". Step 5 Click Compatibility tab and check "Run this program in compatibility mode for:", then select Windows 7, then click "Apply". Step 6 Then click "WinPcap_4_1_2". The wizard will guide you through the setup process. 8
  • Edimax HP-5103 | User Manual - Page 10
    Step 7 When the following WinPcap Compatibility Assistant appears, select Run the program without getting help. 9
  • Edimax HP-5103 | User Manual - Page 11
    Step 8 After the installation is complete, click "Finish". 10
  • Edimax HP-5103 | User Manual - Page 12
    Step 9 Click the "Edimax PowerLine Utility", the "PLC 500Mbps Utility" appears, click "Next" to continue. 11
  • Edimax HP-5103 | User Manual - Page 13
    Step 10 Select where you want to install the utility software, and then click "Next". Step 11 After the installation is complete, click "Close". 12
  • Edimax HP-5103 | User Manual - Page 14
    Step 12 An icon will appear on your desktop. Click the icon to open the utility software. Note: You can manage all the connected powerline adapters with the utility software. However, installing the utility software is optional. 13
  • Edimax HP-5103 | User Manual - Page 15
    , make sure that no other powerline utility is installed on your computer. If any other utility software is installed, uninstall it and reboot the computer. Step 2 Insert the CD into your CD-ROM drive. When the following EZmax Wizard appears, select your model. Step 3 Then click "Setup Utility". 14
  • Edimax HP-5103 | User Manual - Page 16
    Step 4 If you have not installed WinPcap version 4.1.2 (or higher) on your computer before. The wizard will guide you through the setup process. 15
  • Edimax HP-5103 | User Manual - Page 17
    16
  • Edimax HP-5103 | User Manual - Page 18
    Step 5 When the "Edimax PowerLine Utility" setup wizard appears, click "Next" to continue. Step 6 In the "License Agreement" screen, please select "I Agree" and then click "Next" to continue. 17
  • Edimax HP-5103 | User Manual - Page 19
    Step 7 Select where you want to install the utility software, and then click "Next". Step 8 If you confirm to install the utility, click "Next". 18
  • Edimax HP-5103 | User Manual - Page 20
    Step 9 After the installation is complete, click "Close". Step 10 An icon will appear on your desktop. Click the icon to open the utility software. Note: You can manage all the connected powerline adapters with the utility software. However, installing the utility software is optional. 19
  • Edimax HP-5103 | User Manual - Page 21
    device. By default, this column is blank. Select a device and click "Enter Password" to set up a password for the device. Click "Scan" and the utility software will perform an immediate scan of other remote powerline adapters. By default, the utility automatically scans every few seconds. 20
  • Edimax HP-5103 | User Manual - Page 22
    4.2 Diagnostics Tab The "Diagnostics" tab displays the system information and history of all remote devices. The upper panel displays technical data concerning the software and hardware on the host computer and the lower panel displays the history of all remote devices. 21
  • Edimax HP-5103 | User Manual - Page 23
    4.3 About Tab The "About" tab contains some basic information about the software. You can also enable or disable the autoscan function under "Preferences". 22
  • Edimax HP-5103 | User Manual - Page 24
    AV network with the "Group" button. 5.1 Forming a HomePlug AV Logical Network When two devices with different group keys are connected to the same powerline and you want them to form a logical network, follow the following procedures: Step 1 Press and hold the "Group" button on adapter A for less
  • Edimax HP-5103 | User Manual - Page 25
    5.2 Joining a Network If you want to add a new powerline device to an existing network, follow the following procedures: Step 1 Press the "Group" button on an adapter in the existing network (adapter A or B) for less
  • Edimax HP-5103 | User Manual - Page 26
    5.3 Leaving a Network & Joining another Network If you want to remove a powerline device from an existing network and add it to another network, follow the following procedures: Step 1 Press the "Group" button on the adapter to be
  • Edimax HP-5103 | User Manual - Page 27
    Chapter 6: Troubleshooting If your powerline adapters have difficulty communicating with each other, try the degrade performance.  If your building has more than one circuit breaker box, your powerline adapters may not be able to establish a connection across different circuit breaker boxes.
  • Edimax HP-5103 | User Manual - Page 28
    and used in accordance with the instructions, may cause harmful interference to for certification, and can be used in laptop computer(s) with substantially similar physical dimensions, . This transmitter is restricted for use with the specific antenna tested in the application for certification. The
  • Edimax HP-5103 | User Manual - Page 29
    ää direktiivien 2004/108/EC, 2009/125/EC oleelliset vaatimukset ja muut asiaankuuluvat määräykset. WEEE Directive & Product Disposal At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for
  • Edimax HP-5103 | User Manual - Page 30
    29
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
HP-5103
User Manual
03-2014 / v1.0