Edimax HP-6002 User Manual
Edimax HP-6002 Manual
 |
View all Edimax HP-6002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Edimax HP-6002 manual content summary:
- Edimax HP-6002 | User Manual - Page 1
HP-6002 User Manual 04-2014 / v1.0 - Edimax HP-6002 | User Manual - Page 2
entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Edimax Technology Co., Ltd. reserves about this product, please refer to the user manual on the CD-ROM. The software and specifications are subject to change without notice - Edimax HP-6002 | User Manual - Page 3
Tab ...21 4.3 About Tab...22 Chapter 5: Group Button ...23 5.1 Forming a HomePlug AV Logical Network 23 5.2 Joining a Network ...24 5.3 Leaving a Network & Joining another Network 25 Chapter 6: Troubleshooting ...26 2 - Edimax HP-6002 | User Manual - Page 4
walls or across floors • Built-in QoS assures the quality of bandwidth sensitive applications such as voice, video and online games • Supports IGMP managed multicast IP transmission, optimizing IPTV streaming • Compatible with all AV500 & AV200 Powerline adapters (HomePlug AV) 1.2 Application High - Edimax HP-6002 | User Manual - Page 5
1.3 Compatibility AV600 powerline devices (HomePlug AV standard) are incompatible and cannot be used with 14Mbps and 85Mbps powerline devices (HomePlug 1.0 and 1.1 standards). 1.4 System Requirements Operating System CPU RAM Free Disk Space Network Interface Utility supports Windows XP/Vista/7/8 - Edimax HP-6002 | User Manual - Page 6
Chapter 2: Interfaces 2.1 LEDs LED Status Green LAN Blinking Off Green PLC Off Green PWR Off Description LAN port connected LAN activity (transferring data) LAN port not connected The green indicator turns on and the green indicator turns blinks slowly when the device is detecting a powerline link - Edimax HP-6002 | User Manual - Page 7
2.2 Button Interface Ethernet Port Group Reset Description This is a Gigabit Ethernet port for connecting to a computer or other devices with a network port. Creates an encrypted powerline network group automatically (press the button for less than 3 seconds). Leaves an encrypted powerline network - Edimax HP-6002 | User Manual - Page 8
Chapter 3:Utility Software Installation 3.1 Win 8 Step 1 Before installing the utility software, make sure that no other powerline utility is installed on your computer. If any other utility software is installed, uninstall it and reboot the computer. Step 2 Insert the CD into your CD-ROM drive. - Edimax HP-6002 | User Manual - Page 9
Step 4 Click right button on WinPCap4.1.2 then click "Properties". Step 5 Click Compatibility tab and check "Run this program in compatibility mode for:", then select Windows 7, then click "Apply". Step 6 Then click "WinPcap_4_1_2". The wizard will guide you through the setup process. 8 - Edimax HP-6002 | User Manual - Page 10
Step 7 When the following WinPcap Compatibility Assistant appears, select Run the program without getting help. 9 - Edimax HP-6002 | User Manual - Page 11
Step 8 After the installation is complete, click "Finish". 10 - Edimax HP-6002 | User Manual - Page 12
Step 9 Click the "Edimax PowerLine Utility", the "PLC AV600 Utility" appears, click "Next" to continue. 11 - Edimax HP-6002 | User Manual - Page 13
Step 10 Select where you want to install the utility software, and then click "Next". Step 11 After the installation is complete, click "Close". 12 - Edimax HP-6002 | User Manual - Page 14
Step 12 An icon will appear on your desktop. Click the icon to open the utility software. Note: You can manage all the connected powerline adapters with the utility software. However, installing the utility software is optional. 13 - Edimax HP-6002 | User Manual - Page 15
3.2 Win XP/Vista / 7 Step 1 Before installing the utility software, make sure that no other powerline utility is installed on your computer. If any other utility software is installed, uninstall it and reboot the computer. Step 2 Insert the CD into your CD-ROM drive. When the following EZmax Wizard - Edimax HP-6002 | User Manual - Page 16
Step 4 If you have not installed WinPcap version 4.1.2 (or higher) on your computer before. The wizard will guide you through the setup process. 15 - Edimax HP-6002 | User Manual - Page 17
16 - Edimax HP-6002 | User Manual - Page 18
Step 5 When the "Edimax PowerLine Utility" setup wizard appears, click "Next" to continue. Step 6 In the "License Agreement" screen, please select "I Agree" and then click "Next" to continue. 17 - Edimax HP-6002 | User Manual - Page 19
Step 7 Select where you want to install the utility software, and then click "Next". Step 8 If you confirm to install the utility, click "Next". 18 - Edimax HP-6002 | User Manual - Page 20
Step 9 After the installation is complete, click "Close". Step 10 An icon will appear on your desktop. Click the icon to open the utility software. Note: You can manage all the connected powerline adapters with the utility software. However, installing the utility software is optional. 19 - Edimax HP-6002 | User Manual - Page 21
Chapter 4: Using the Utility Software 4.1 Main Tab The "Main" tab provides a list of powerline adapters connected to the network. The upper panel displays local powerline adapters. The lower panel displays remote powerline adapters in the network. Set Name Enter Password Scan Select a device and - Edimax HP-6002 | User Manual - Page 22
4.2 Diagnostics Tab The "Diagnostics" tab displays the system information and history of all remote devices. The upper panel displays technical data concerning the software and hardware on the host computer and the lower panel displays the history of all remote devices. 21 - Edimax HP-6002 | User Manual - Page 23
4.3 About Tab The "About" tab contains some basic information about the software. You can also enable or disable the autoscan function under "Preferences". 22 - Edimax HP-6002 | User Manual - Page 24
Chapter 5: Group Button This section demonstrates how to add or remove devices from a HomePlug AV network with the "Group" button. 5.1 Forming a HomePlug AV Logical Network When two devices with different group keys are connected to the same powerline and you want them to form a logical network, - Edimax HP-6002 | User Manual - Page 25
5.2 Joining a Network If you want to add a new powerline device to an existing network, follow the following procedures: Step 1 Press the "Group" button on an adapter in the existing network (adapter A or B) for less than 3 seconds. The Power LED will start to blink. Step 2 Within 120 seconds after - Edimax HP-6002 | User Manual - Page 26
5.3 Leaving a Network & Joining another Network If you want to remove a powerline device from an existing network and add it to another network, follow the following procedures: Step 1 Press the "Group" button on the adapter to be removed (adapter B) for at least 10 seconds. Step 2 Wait for adapter - Edimax HP-6002 | User Manual - Page 27
Chapter 6: Troubleshooting If your powerline adapters have difficulty communicating with each other, try the following procedures: Try power cycling the unit by unplugging it from the electric - Edimax HP-6002 | User Manual - Page 28
. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - Edimax HP-6002 | User Manual - Page 29
ää direktiivien 2004/108/EC, 2009/125/EC oleelliset vaatimukset ja muut asiaankuuluvat määräykset. WEEE Directive & Product Disposal At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for - Edimax HP-6002 | User Manual - Page 30
29
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
 |
 |
HP-6002
User Manual
04-2014 / v1.0