Edimax HP-6002AC UK User Manual
Edimax HP-6002AC UK Manual
 |
View all Edimax HP-6002AC UK manuals
Add to My Manuals
Save this manual to your list of manuals |
Edimax HP-6002AC UK manual content summary:
- Edimax HP-6002AC UK | User Manual - Page 1
HP-6002AC User Manual 03-2014 / v1.0 - Edimax HP-6002AC UK | User Manual - Page 2
entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Edimax Technology Co., Ltd. reserves about this product, please refer to the user manual on the CD-ROM. The software and specifications are subject to change without notice - Edimax HP-6002AC UK | User Manual - Page 3
Tab ...21 4.3 About Tab...22 Chapter 5: Group Button ...23 5.1 Forming a HomePlug AV Logical Network 23 5.2 Joining a Network ...24 5.3 Leaving a Network & Joining another Network 25 Chapter 6: Troubleshooting ...26 2 - Edimax HP-6002AC UK | User Manual - Page 4
the quality of bandwidth sensitive applications such as voice, video and online games • Supports IGMP managed multicast IP transmission, optimizing IPTV streaming • Compatible with all AV500 & AV200 Powerline adapters (HomePlug AV) • Integrated power socket with noise filter 1.2 Application High - Edimax HP-6002AC UK | User Manual - Page 5
1.3 Compatibility AV600 powerline devices (HomePlug AV standard) are incompatible and cannot be used with 14Mbps and 85Mbps powerline devices (HomePlug 1.0 and 1.1 standards). 1.4 System Requirements Operating System CPU RAM Free Disk Space Network Interface Utility supports Windows XP/Vista/7/8 - Edimax HP-6002AC UK | User Manual - Page 6
link. The green indicator turns on and the green indicator turns blinks quickly to indicate data is being transferred over the powerline link. No other PLC device detected Powered on Powered off 2.2 Button Interface Description Integrated The integrated electrical socket enables additional Power - Edimax HP-6002AC UK | User Manual - Page 7
or other devices with a network port. Creates an encrypted powerline network group automatically (press the button for less than 3 seconds). Leaves an encrypted powerline network group (press the button for 8~12 seconds). Restores the powerline adapter to factory defaults (press the button for 8~12 - Edimax HP-6002AC UK | User Manual - Page 8
Chapter 3:Utility Software Installation 3.1 Win 8 Step 1 Before installing the utility software, make sure that no other powerline utility is installed on your computer. If any other utility software is installed, uninstall it and reboot the computer. Step 2 Insert the CD into your - Edimax HP-6002AC UK | User Manual - Page 9
Step 4 Click right button on WinPCap4.1.2 then click "Properties". Step 5 Click Compatibility tab and check "Run this program in compatibility mode for:", then select Windows 7, then click "Apply". Step 6 Then click "WinPcap_4_1_2". The wizard will guide you through the setup process. 8 - Edimax HP-6002AC UK | User Manual - Page 10
Step 7 When the following WinPcap Compatibility Assistant appears, select Run the program without getting help. 9 - Edimax HP-6002AC UK | User Manual - Page 11
Step 8 After the installation is complete, click "Finish". 10 - Edimax HP-6002AC UK | User Manual - Page 12
Step 9 Click the "Edimax PowerLine Utility", the "PLC AV600 Utility" appears, click "Next" to continue. 11 - Edimax HP-6002AC UK | User Manual - Page 13
Step 10 Select where you want to install the utility software, and then click "Next". Step 11 After the installation is complete, click "Close". 12 - Edimax HP-6002AC UK | User Manual - Page 14
Step 12 An icon will appear on your desktop. Click the icon to open the utility software. Note: You can manage all the connected powerline adapters with the utility software. However, installing the utility software is optional. 13 - Edimax HP-6002AC UK | User Manual - Page 15
3.2 Win XP/Vista / 7 Step 1 Before installing the utility software, make sure that no other powerline utility is installed on your computer. If any other utility software is installed, uninstall it and reboot the computer. Step 2 Insert the CD into your - Edimax HP-6002AC UK | User Manual - Page 16
Step 4 If you have not installed WinPcap version 4.1.2 (or higher) on your computer before. The wizard will guide you through the setup process. 15 - Edimax HP-6002AC UK | User Manual - Page 17
16 - Edimax HP-6002AC UK | User Manual - Page 18
Step 5 When the "Edimax PowerLine Utility" setup wizard appears, click "Next" to continue. Step 6 In the "License Agreement" screen, please select "I Agree" and then click "Next" to continue. 17 - Edimax HP-6002AC UK | User Manual - Page 19
Step 7 Select where you want to install the utility software, and then click "Next". Step 8 If you confirm to install the utility, click "Next". 18 - Edimax HP-6002AC UK | User Manual - Page 20
Step 9 After the installation is complete, click "Close". Step 10 An icon will appear on your desktop. Click the icon to open the utility software. Note: You can manage all the connected powerline adapters with the utility software. However, installing the utility software is optional. 19 - Edimax HP-6002AC UK | User Manual - Page 21
Using the Utility Software 4.1 Main Tab The "Main" tab provides a list of powerline adapters connected to the network. The upper panel displays local powerline adapters. The lower panel displays remote powerline adapters in the network. Set Name Enter Password Scan Select a device and click "Set - Edimax HP-6002AC UK | User Manual - Page 22
4.2 Diagnostics Tab The "Diagnostics" tab displays the system information and history of all remote devices. The upper panel displays technical data concerning the software and hardware on the host computer and the lower panel displays the history of all remote devices. 21 - Edimax HP-6002AC UK | User Manual - Page 23
4.3 About Tab The "About" tab contains some basic information about the software. You can also enable or disable the autoscan function under "Preferences". 22 - Edimax HP-6002AC UK | User Manual - Page 24
AV network with the "Group" button. 5.1 Forming a HomePlug AV Logical Network When two devices with different group keys are connected to the same powerline and you want them to form a logical network, follow the following procedures: Step 1 Press and hold the "Group" button on adapter A for less - Edimax HP-6002AC UK | User Manual - Page 25
5.2 Joining a Network If you want to add a new powerline device to an existing network, follow the following procedures: Step 1 Press the "Group" button on an adapter in the existing network (adapter A or B) for less - Edimax HP-6002AC UK | User Manual - Page 26
5.3 Leaving a Network & Joining another Network If you want to remove a powerline device from an existing network and add it to another network, follow the following procedures: Step 1 Press the "Group" button on the adapter to be - Edimax HP-6002AC UK | User Manual - Page 27
Chapter 6: Troubleshooting If your powerline adapters have difficulty communicating with each other, try the degrade performance. If your building has more than one circuit breaker box, your powerline adapters may not be able to establish a connection across different circuit breaker boxes. - Edimax HP-6002AC UK | User Manual - Page 28
and used in accordance with the instructions, may cause harmful interference to is restricted for use with the specific antenna tested in the application for certification. The antenna(s) times to ensure the safe use of the equipment. EU Countries Intended for Use The ETSI version of this device - Edimax HP-6002AC UK | User Manual - Page 29
EU Declaration of Conformity English: This equipment is in compliance with the oleelliset vaatimukset ja muut asiaankuuluvat määräykset. WEEE Directive & Product Disposal At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed - Edimax HP-6002AC UK | User Manual - Page 30
29
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
 |
 |
HP-6002AC
User Manual
03-2014 / v1.0