Home » Edimax Manuals » Webcams » Edimax IC-3005 » Manual Viewer

Edimax IC-3005 Manual

View all Edimax IC-3005 manuals

Add to My Manuals
Save this manual to your list of manuals

Edimax IC-3005 manual content summary:

Edimax IC-3005 | Manual - Page 1
1
Edimax IC-3005 | Manual - Page 2
safety and health reasons as intented use. Detailed description: - Health purposes: Users can pass through the Internet (from anywhere) to control the product (IP Camera). It's intended to watch and listen to people who need to be cared for at home and automatically sends e-mails and phone alerts to
Edimax IC-3005 | Manual - Page 3
and the setup screen may appear slightly different from those shown in this QIG. For more detailed information about this product, please refer to the User Manual on the CD-ROM. The software and specifications are subject to change without notice. Please visit our web site www.edimax.com for
Edimax IC-3005 | Manual - Page 4
IP Camera 6 1.1 Package Contents 6 1.2 Basic Introduction 7 1.3 Product Highlights 8 1.4 Familiar with Key Components 9 1.5 Camera Installation 11 1.6 Locate the IP Address of this IP Camera 49 2.6.2 Setup Motion Detection Regions 51 2.7 Schedule 53 2.8 System 55 2.8.1 Camera Information 56
Edimax IC-3005 | Manual - Page 5
Software 65 3-1 Installing IP Camera Surveillance Software 65 3-2 Using IP camera surveillance software 69 3-3 Configure IP camera surveillance software 72 3-3-1 Configure cameras How to View IP Camera over the Internet with iPhone 97 Chapter V: Appendix 104 5.1 Troubleshooting 104 5.2 Obtain
Edimax IC-3005 | Manual - Page 6
. If anything is missing, please contact the dealer of purchase and return the package to claim for missing contents. Item Name 1 IP Camera 2 Power Adapter 3 Ethernet Cable 4 Quick Installation Guide 5 CD-ROM (Including Manual/Utility/Multi-Language QIG) 6 Mounting Kit Quantity 1 1 1 1 1 1 6
Edimax IC-3005 | Manual - Page 7
Internet! The Edimax IC-3005 series features extremely high picture quality matched by a high frame rate video streaming because of advanced video compression. To get the best video quality, select MPEG4 or MJPEG, depending on your network settings. Before enjoying your new IP camera, please check
Edimax IC-3005 | Manual - Page 8
wireless network (802.11b / 802.11g / 802.11n) support. (IC-3005Wn only) Wireless data encryption (WEP / WPA). (IC-3005Wn only) WPS (Wi-Fi Protected Setup), the easiest way to setup a secure wireless connection. (IC-3005Wn only) Supports DHCP and you can also assign a fixed IP address to the camera
Edimax IC-3005 | Manual - Page 9
indicating the camera's status and networking status. LED Blue: Status Camera Focus LED Green: Network LED Status Description Steady on: System is correctly powered on Slow Blinking: Camera is booting Quick Blinking: Camera is waiting for WPS connection Network Steady; Network is connected
Edimax IC-3005 | Manual - Page 10
*WPS (IC-3005Wn only) Press and hold this button for more than 5 seconds to reset the camera settings to factory default. Press the WPS button (click) on the IP Cam and click on the Access Point that you want to wirelessly connect it to. Ethernet Connector Connects to your local area network with
Edimax IC-3005 | Manual - Page 11
1.5 Camera Installation 1. Unpack your Edimax IP Camera from its packaging and ensure that all the items listed in Chapter 1 are there. 2. Connect the Edimax IP Camera to your network by attaching a network cable from your switch or router to the LAN port on the IP Camera. 3. Connect the power
Edimax IC-3005 | Manual - Page 12
1.6 Locate the IP Address of this IP Camera Default IP address of this IP camera is 192.168.2.3. If you wish to assign another IP address to this IP camera, you have to log onto the web configuration interface of the camera first. If the left three fields of the IP address of your computer is not
Edimax IC-3005 | Manual - Page 13
2. Double-click „Network Connections‟ icon. 3. Right-click „Local Area Connection‟, and click „Properties‟. 13
Edimax IC-3005 | Manual - Page 14
4. Select „Internet Protocol (TCP/IP)‟, then click „Properties‟. 14
Edimax IC-3005 | Manual - Page 15
ways you can recover it: a. Press and hold the „Reset‟ button located at the bottom of this IP camera, to clear all settings of the IP camera and reset the IP address back to 192.168.2.3. You‟ll lose all settings in the IP camera. b. Ask network administrator to check the DHCP release table, if the
Edimax IC-3005 | Manual - Page 16
LED is on), and then launch Internet Explorer and type the IP address of the IP camera in address bar of Internet Explorer. You should be prompted to input the user name and password: Default user name is „admin‟ (in lower case) and password is „1234‟. Click „OK‟ to continue after user name and
Edimax IC-3005 | Manual - Page 17
you should see the following messages at the top of Internet Explorer: If not, please go to section 1.8.1 „Install ActiveX‟. This IP camera requires a special ActiveX control (A.K.A. „Plugin‟) to work. Please click on the message, and select „Install ActiveX Control...‟: When you‟re prompted, click
Edimax IC-3005 | Manual - Page 18
see one of these messages (or both): OR Your computer may not have the display capability that this IP camera requires, or you don't have Microsoft DirectX® installed. Please download Microsoft DirectX® from Microsoft's website (http://www.microsoft.com), and try again. In some cases, your computer
Edimax IC-3005 | Manual - Page 19
of browsers support Microsoft ActiveX, but if ActiveX is not present on your computer, you need to install it before you can use this Internet camera. If you see this message when you log onto IP camera, please click the link to download ActiveX: Press „Run‟ to download ActiveX installation package
Edimax IC-3005 | Manual - Page 20
Press „Next‟ to start installation; press „Next‟ button when you‟re prompted, until installation is complete: 20
Edimax IC-3005 | Manual - Page 21
Press „Finish‟ when you see this message. Now please go back to last section to install IP camera plugin. 21
Edimax IC-3005 | Manual - Page 22
Chapter II: Using Web Management Interface 2.1 Camera Settings The first menu after you logged onto web management interface is „Camera‟, and this is the only menu you can see the real-time image from camera. You can always back to this menu by clicking „Camera‟ on the top of web management
Edimax IC-3005 | Manual - Page 23
Snapshot Record Auto Exposure Full Screen Digital Zoom MPEG4 mode also supports motion detection Take a snapshot picture and save the picture to disable automatic exposure control. Click this button and the image captured by camera will be displayed in full-screen mode. To resume, double-click the
Edimax IC-3005 | Manual - Page 24
Fit to Window To exit digital zoom setting, press button. Click this button and captured image will fit to window size. *Note: If you‟re not using Microsoft Internet Explorer as web browser, some functionalities may not work properly. 24
Edimax IC-3005 | Manual - Page 25
2.1.1 About This function will provide you with the version number of current IP camera plugin, which is useful when you need online support. To see version information, right-click on the image. A pop-up menu will appear: Select „About‟ and the version information will appear: 25
Edimax IC-3005 | Manual - Page 26
All network-related settings can be found in this menu, and you have to specify TCP/IP parameters in this menu if you want to change IP address, use PPPoE, Dynamic DNS, and activate UPnP function. You can access this menu by clicking „LAN‟ on the top of web management interface. 2.2.1 IP Address
Edimax IC-3005 | Manual - Page 27
below: Item Network Type Description This camera can obtain the IP address from DHCP server automatically (if you have one), or set a fixed IP address. Select „DHCP‟ to obtain IP address automatically or „Static IP Address‟ to assign this IP camera with a fixed IP address. IP Address Subnet Mask
Edimax IC-3005 | Manual - Page 28
this menu will be given below: Item Enable RTSP RTSP Port RTSP Path RTP Port Range Description Select „Enable‟ to activate RTSP function of this IP camera, select „Disable‟ to disable it. Input the port number which RTSP will use. Default setting is 554. Input the path of RTSP stream. ** Input the
Edimax IC-3005 | Manual - Page 29
MTU Select „Enable‟ to activate PPPoE function of this IP camera, select „Disable‟ to disable it. Input the PPPoE username assigned by your ISP here. Input the PPPoE password assigned by your ISP here. Input the MTU (Maximum Transmission Unit) given by your ISP here. Ask your ISP if you don
Edimax IC-3005 | Manual - Page 30
menu will be given below: Item Enable DDNS Provider Host Name User Name Password Description Select „Enable‟ to activate Dynamic DNS function of this IP camera, select „Disable‟ to disable it. Select dynamic DNS service provider here. Only dyndns.org is available currently. Input dynamic DNS host
Edimax IC-3005 | Manual - Page 31
is activated, all UPnP-compatible computers / network devices will be able to discover this IP camera automatically (only those in the same local network). This function is useful and you don‟t have to remember the IP address of this IP camera. Simply open „Network neighbor‟ and it‟s there! The
Edimax IC-3005 | Manual - Page 32
Click the message to open „My Network Places‟, and you‟ll see the IP camera: You can double-click the icon to launch Internet Explorer and log onto IP camera‟s web management interface directly. 32
Edimax IC-3005 | Manual - Page 33
file extension. For example, if the filename you specified here is „loginfree‟ and your IP camera‟s IP address is „192.168.2.3‟, then everyone on the network can access to the picture taken by the IP camera at „http://192.168.2.3/loginfree.jpg‟. This function is for convenience only, and anyone who
Edimax IC-3005 | Manual - Page 34
2.3 WLAN Parameters If you wish to use wireless network instead of wired network connection, you have to set wireless LAN parameters here. You can access this menu by clicking „LAN‟ on the top of web management interface. 34
Edimax IC-3005 | Manual - Page 35
AP you wish to connect supports push button WPS configuration, click „Start PBC‟ and press the WPS button on the wireless AP to start pairing. Configure via PinCode Wireless Connection Network Type You can also press „WPS / Reset‟ button located at the back of IP camera for the same purpose. DO
Edimax IC-3005 | Manual - Page 36
use the same encryption type if you wish to connect to a certain wireless access point. If the wireless access point does not use encryption, „Disabled‟ will be displayed here. Network Type: Shows the network type of a certain wireless access point (Infrastructure or Adhoc). Input the SSID of the
Edimax IC-3005 | Manual - Page 37
data transfer rate here, from 1Mbps to 54Mbps. Maximum transfer rate for 802.11b wireless network is 11Mbps, and maximum transfer rate for 802.11g wireless network is 54Mbps. Authentication It‟s recommended to select „Auto‟, so the data transfer rate will vary according to the actual signal
Edimax IC-3005 | Manual - Page 38
. If an authentication type does not support need encryption, this field will be „128-Bit‟ is safer, however, it would make the network a little bit slower. If the key length is 64 Select the default key set that is IP camera should use against the wireless access point when WEP encryption is used.
Edimax IC-3005 | Manual - Page 39
WEP Key 2 WEP Key 3 WEP Key 4 only have one WEP key. Input the 2nd set of WEP key here. Input the 3rd set of WEP key here. Input the 4th set of WEP key here. Click „Apply‟ to save settings and make the new settings take effect. 39
Edimax IC-3005 | Manual - Page 40
2.4 Video You can specify the video and audio parameters of this IP camera here. 40
Edimax IC-3005 | Manual - Page 41
Mode This IP camera supports two video encoding formats: MPEG4 and MJPEG. You can select the encoding format from one of them. The descriptions of every setting in this menu will be given below: Item Default Video Format Description Specify default video encoding format of this IP camera here
Edimax IC-3005 | Manual - Page 42
bit rate is fixed, you can select a bit rate from dropdown menu. Higher bit rate means better video quality. But if your network bandwidth is limited, network bandwidth. CAUTION: Choosing a low frame rate will save bandwidth, but may not be able to capture every motion if the object that IP camera
Edimax IC-3005 | Manual - Page 43
. Higher video refresh rate provides more details about motion, but requires more network bandwidth. CAUTION: Choosing a low frame rate will save bandwidth, but may not be able to capture every motion if the object that IP camera points to is moving fast. Click „Apply‟ to save settings and make
Edimax IC-3005 | Manual - Page 44
detected. This is very convenient since IP camera will guard the environment automatically for you, and you don‟t have to look at the monitor all the time. You can access this menu by clicking „E-Mail & FTP‟ on the top of web management interface. The instructions of Email and FTP settings will be
Edimax IC-3005 | Manual - Page 45
software (like Outlook, Outlook Express etc.), or ask your network administrator or ISP. Input mail server‟s SMTP port here. Most of mail servers use port number 25. Input the Email address of mail sender, this will help you to identify the Email sent by this IP camera server doesn‟t support SSL 45
Edimax IC-3005 | Manual - Page 46
software (like Outlook, Outlook Express etc.), or ask your network password of SMTP server here, if your SMTP server requires the use of authentication. Click „Apply‟ to save settings and make the new settings take effect. After that, you can click „Send a test email‟ to send a testing
Edimax IC-3005 | Manual - Page 47
picture by FTP: The descriptions of every setting in this menu will be given below: Item FTP Server FTP Port User Name Password Remote Folder Description Input the IP address or host name of the FTP server you wish to use here. Input the port number of the FTP server you wish
Edimax IC-3005 | Manual - Page 48
, you can try to use passive mode. Click „Apply‟ to save settings and make the new settings take effect. After that, you can click „Upload a test file‟ to send a file to the FTP server you set here, so you can make sure the setting you specified here is correct and working
Edimax IC-3005 | Manual - Page 49
2.6 Motion Detection 2.6.1 Basic Settings Motion detection function makes this IP camera become your non-stop guard. You don‟t have to waste all the time monitoring the images from the camera, and camera will detect all motions for you. Once motion is detected, a captured image will be sent to you
Edimax IC-3005 | Manual - Page 50
select „No‟ to disable this function. Set the subject of Email being sent here. This will help you to distinguish the Email sent by this IP camera from others. Select „Yes‟ to send a picture to the FTP server you specified in „E-Mail & FTP‟ menu when a motion is detection, and select „No‟ to
Edimax IC-3005 | Manual - Page 51
outside of motion detection region will be ignored, so you won‟t receive too much „useless‟ notifications. This IP camera supports up to 3 motion detection regions. To setup detection region, Please use your mouse to drag and resize motion detection regions marked as „Region1‟, „Region2‟, and
Edimax IC-3005 | Manual - Page 52
Control the detection sensitivity of motion detection of respective motion detection region. When sensitivity is higher, small changes in image will cause IP camera to send a Email / FTP notification; if you received too much unwanted notification, try to set sensitivity to a lower value. Click this
Edimax IC-3005 | Manual - Page 53
2.7 Schedule You can control FTP / Email image transfer by schedule. Unlike motion detection, the only key to trigger file transfer is time. You can access this menu by clicking „Motion Detection‟ on the top of web management interface. The descriptions of every setting in this menu will be given
Edimax IC-3005 | Manual - Page 54
Upload files with filename composed of date / time: When a file is uploaded, it will be named as the date and time when the file is uploaded. Over file with the same filename: When a new file is uploaded, it will replace the old one with the same file you specified here. Enable E-Mail Schedule.
Edimax IC-3005 | Manual - Page 55
menu allows you to set some system-specific parameters, like password and time setting. You can also upgrade the firmware of this IP camera, to make new functions available on this IP camera. You may also clear all settings or reboot the IP camera here. You can access this menu by clicking „System
Edimax IC-3005 | Manual - Page 56
specify the name of this IP Camera here. This can be used to identify your camera on the network when you have more than one IP camera in the same network. Password Confirm Password Default name begins with „IC-„ plus the last 6 characters of the MAC address of this IP camera. You can modify the
Edimax IC-3005 | Manual - Page 57
2.8.2 Date / Time Setting This setting allows you to change the date and time of the real time clock in this IP camera. You can set the time manually, or use network time protocol (NTP) to set the time automatically. The descriptions of every setting in this menu will be given below: Item Set Date
Edimax IC-3005 | Manual - Page 58
Utilities This menu allows you to upgrade firmware, clear all settings, reboot the IP camera, and switch LED lights on/off. The descriptions of every setting in this menu will be given below: Item Upgrade Firmware Description If you downloaded latest firmware file from our website, you can click
Edimax IC-3005 | Manual - Page 59
you don‟t want other people know the camera is transferring data. You can click this button again to switch LED lights on again. 59
Edimax IC-3005 | Manual - Page 60
2.9 Status This menu provides all information about this IP camera, like firmware version, system uptime, date / time, and network information. You can access this menu by clicking „Status‟ on the top of web management interface. 60
Edimax IC-3005 | Manual - Page 61
them user-level user name and password, so they can only view the image and can not change any system setting. When they want to click menus other than „Camera‟, they will see the following message informing that they don‟t have permission to do that: This IP camera supports up to 16 user accounts
Edimax IC-3005 | Manual - Page 62
to 9, A to Z, and a to z). Not using symbols and space. Specify the password for this user here. Specify the password for this user here again. Select „Operator‟ and this user will be able to change the settings of IP camera; select „Guest‟ and this user can only view the image. Click „Add‟ to add
Edimax IC-3005 | Manual - Page 63
2.11 Log All activities of this IP camera will be logged, and you and enter „Log‟ menu to view these logs. You can access this menu by clicking „Log‟ on the top of web management interface. Click „Refresh‟ to get latest update. 63
Edimax IC-3005 | Manual - Page 64
2.11 Language Menu This IP camera‟s user interface supports multiple languages. To change language, click „Language‟ dropdown menu: Select a language you wish to use from dropdown menu to change displaying language. 64
Edimax IC-3005 | Manual - Page 65
Surveillance Software 3-1 Installing IP Camera Surveillance Software The IP camera surveillance software provides various functions like video recording, after this software is installed, you can use your IP camera to safeguard your property. Please follow the following instructions to install the
Edimax IC-3005 | Manual - Page 66
3. If you need installation program to create a desktop icon or a quick launch icon for you, click all items you need here, than click „Next‟ to continue. 66
Edimax IC-3005 | Manual - Page 67
4. Here lists all options you chose in previous steps, if everything‟s correct, click „Install‟ to start installing procedure, or click „Back‟ to go back to previous step to modify installing settings. 5. The installing procedure will take some time, please be patient. 67
Edimax IC-3005 | Manual - Page 68
6. When you see this window, it means the software installing procedure is complete. Please click „Finish‟ to finish the procedure (IP camera surveillance software will start after you click „Finish‟ button, if you want to start it later, uncheck „Launch IPCam Surveillance Software‟ box). 68
Edimax IC-3005 | Manual - Page 69
bar, or start menu to start the IP camera surveillance software. Before you start: IP camera surveillance software will only work when your monitor's resolution is '1024 x 768'. Please change the resolution before you use IP camera surveillance software, or it won't start. Here are descriptions
Edimax IC-3005 | Manual - Page 70
Click this button and the IP camera surveillance software will switch displaying the image of all connected camera automatically. Click this button once only available for supported cameras. Zoom In Zoom-in (Too see more details). This function is only available for supported cameras. PTZ control
Edimax IC-3005 | Manual - Page 71
window (stop surveillance) Displays all system messages like camera is disconnected etc. Terminates IP camera surveillance software. Minimize window Minimizes IP camera surveillance software window. Video displaying Displays the image of all cameras by the display layout area you selected. 71
Edimax IC-3005 | Manual - Page 72
3-3 Configure IP camera surveillance software 3-3-1 Configure cameras Before you use this IP camera surveillance software, you must configure the camera(s) you wish to connect. Please click „System configure‟ button and a popup menu will appear: Please select „Configure Cameras‟ to configure cameras
Edimax IC-3005 | Manual - Page 73
click „Select‟ button to fill all parameters of selected camera in every camera configuration fields. Rescan all cameras on your local network. If you didn‟t see the camera you expected in „Camera Search‟ box, or new cameras has been joined to your local network after last scan. Input the name of
Edimax IC-3005 | Manual - Page 74
to use „Select‟ button to fill the content of this field. **: Only available for cameras support this function. After you‟ve set all channels you wish to set, click „OK‟ to save settings, and if everything‟s correct, you‟ll see the camera‟s image in IP camera surveillance software‟s main menu: 74
Edimax IC-3005 | Manual - Page 75
3-3-1-2 Schedule Recording In this tab, you can setup scheduled video recording, so you can record the video captured by all cameras you have by a pre-defined schedule. Here are the descriptions of all setting items: Item Channel One Time Schedules New (One Time Schedules) Description Select
Edimax IC-3005 | Manual - Page 76
Edit Delete New (Weekly Schedules) Please specify the time duration of this one-time schedule (the date and time of „From‟ and „To‟), then click „OK‟ to save settings. Please note you must set a schedule that will be happened in the future, you can not set a schedule in the past. You can modify a
Edimax IC-3005 | Manual - Page 77
Edit Delete OK Cancel Please check all weekdays that applies, and set the start time in „From‟ field. You can set the duration of video recording in „Period‟ field (format is HH:MM:SS), and the end time will be calculated automatically and displayed in „To‟ field. You can also click „All Time
Edimax IC-3005 | Manual - Page 78
channel number you wish to set. Check this box and the IP camera surveillance software will not play the audio captured by this camera. Check this box and the IP camera surveillance software will not record the audio captured by this camera. Save settings in this tab. Discard all settings in this
Edimax IC-3005 | Manual - Page 79
concerned, it's not recommended to use this function since some tiny changes you may need to know may not be able to trigger the camera and the camera will not start recording. Here are the descriptions of all setting items: Item Channel Enable Disable Recording Time Invoke alarm when motion is
Edimax IC-3005 | Manual - Page 80
motion is triggered OK Cancel has been detected by the camera. Save settings in this tab. Discard all settings in this tab. 80
Edimax IC-3005 | Manual - Page 81
3-3-2 General Settings You can set system-wide settings of this IP camera surveillance software in this menu. 3-3-2-1 „General‟ tab All general settings like file storage directory and recording spaces can be set here. Here are the descriptions of all
Edimax IC-3005 | Manual - Page 82
Scan Time Cycle Recording Define the time period to pause between every camera switch when you activate „Scan‟ function. You can decide the behavior when hard disk space is full: OK Cancel Disable: Do not overwrite recorded video
Edimax IC-3005 | Manual - Page 83
Setting‟ tab If you want to use motion detection function and wish to get an email that contains the image captured by the camera, please setup your email related parameters here first. Here are the descriptions of all setting items: Item E-Mail Subject Recipient E-Mail Address New Description
Edimax IC-3005 | Manual - Page 84
‟s the same with your POP3 username (the one you used to receive email). Please refer to the setting of your email software or ask your ISP / network administrator if you‟re not sure about this. Input the SMTP password of your SMTP server here. In most cases, it‟s the same with your POP3
Edimax IC-3005 | Manual - Page 85
Security If you don‟t want other people to access this IP camera surveillance software, you can set a password to protect it. You‟ll need to input the password every time you wish to use this IP camera surveillance software: To set password, please use „Security‟ tab in „General Options‟ menu: 85
Edimax IC-3005 | Manual - Page 86
authentication when this software starts. Password authentication is not required when this software starts. Input the password you wish to use here. Input the password you wish to use here again. 3-3-2-4 About This tab shows the version number of the IP camera surveillance software you‟re using
Edimax IC-3005 | Manual - Page 87
3-4 Change Display Layout This IP camera surveillance software provides 8 kinds of display layout: Every layout displays different number of camera and camera arrangement, you can click the icon that presents a specific kind of layout, and the video displaying area will change accordingly. Layout
Edimax IC-3005 | Manual - Page 88
Layout style 3: 6 Displays the video of up to 6 cameras. Cameras Layout style 4: 8 Displays the video of up to 8 cameras. Cameras Layout style 5: 9 Displays the video of up to 9 cameras. Cameras Layout style 6: Displays the video of up to 10 cameras. 10 Cameras 88
Edimax IC-3005 | Manual - Page 89
Layout style 7: 13 Displays the video of up to 13 cameras. Cameras Layout style 8: 16 Displays the video of up to 16 cameras. Cameras 89
Edimax IC-3005 | Manual - Page 90
3-5 Full-screen mode If you want to use all available spaces on your monitor to display surveillance image, you can click „Full Screen‟ button to switch display mode to full-screen mode. To exit full-screen mode, press „ESC‟ key. 90
Edimax IC-3005 | Manual - Page 91
3-6 Scan If you have more than one camera configured, and you wish to switch the displaying image between cameras, you can click „Scan‟ button to switch between all configured cameras. NOTE: If a camera is configured but disconnected, it will still be displayed in a scan sequence (you'll see nothing
Edimax IC-3005 | Manual - Page 92
3-7 Zoom-in / Zoom-out For cameras that support zoom-in / zoom-out function, you can use this function to see more objects that fall in the scope of camera‟s view, or enlarge the image size of a certain object to see its detail. Please select a camera in video displaying area by clicking on its
Edimax IC-3005 | Manual - Page 93
pan - tilt function ( but this model doesn‟t support PTZ function), you can change the position that camera points to, to see different places that fall in the scope of camera‟s view. Please select a camera in video displaying area by clicking on its image, and then click the directions you wish
Edimax IC-3005 | Manual - Page 94
3-9 Snapshot You can take a snapshot of selected camera and save it to „Snapshot‟ sub-folder of pre-defined data directory. Click snapshot button once to take a snapshot; you can take as much snapshot as you want before hard disk is full. 94
Edimax IC-3005 | Manual - Page 95
„Start Recording‟ button: When recording starts, you‟ll see a message displayed in message displaying box like „1/1 10:00:00, Camera 2 Start Manual‟, which means camera 1 starts recording manually on 1/1 at 10:00:00. To stop recording, click „Start Recording‟ button again, and you‟ll see a message
Edimax IC-3005 | Manual - Page 96
3-11 Video Playback You can playback all recorded video by clicking this button. A new window will appear: You have to search the video file before you can play it. There are two kinds of video search: Time Search (search all videos file that falls in a specific period of time) and Motion Search (
Edimax IC-3005 | Manual - Page 97
features iPhone support for iPhone users to monitor their home using Edimax IP-Cameras. Please check following instruction for installation. The following instruction applies to all Edimax routers Step1: Ensure My-PC is Internet-ready via Router Step 2: Check with your ISP (Internet Service Provider
Edimax IC-3005 | Manual - Page 98
DNS account in the http://www.dyndns.org " In this guide, we assume you have already got http://my-name.dyndns.org. (yours may vary) and go to Step 3. Step 3: Configure the 1st Camera based on the following: Configure the 2nd Camera based on the following: 98
Edimax IC-3005 | Manual - Page 99
Configure the Broadband Router based on the following: 99
Edimax IC-3005 | Manual - Page 100
. (1) Make sure Internet connection is ok with iPhone and click "Safari" (2) Enter the IP address of your router‟s "fixed and public IP address" (check the Step 2 for details) Note: "/ipcam.asp" is needed If no fixed and public IP address is given by your ISP, you may enter a link like http://my
Edimax IC-3005 | Manual - Page 101
(3) Enter user name & password for the Edimax IP camera. By default, user name is admin and password is 1234 (4) Let‟s add the 1st IP camera. Click first window and Setting. 101
Edimax IC-3005 | Manual - Page 102
(5) Click "Add" when finishing the following configuration: (6) Click "Add" when finishing the following configuration for the 2nd IP camera 102
Edimax IC-3005 | Manual - Page 103
(7) Configuration is complete. You could see the live video of the 2nd IP camera. 103
Edimax IC-3005 | Manual - Page 104
dealer of purchase for help, please check the troubleshooting list here, this may help you to solve the problem by yourself and therefore saves your valuable time. Scenario I can not connect to IP camera Possible Solution a. Please confirm the IP address setting of the computer you‟re using. If
Edimax IC-3005 | Manual - Page 105
between IP camera and computer / wireless access point should not be too far. IP camera is not responding e. Try to adjust „MTU‟ setting if you‟re using PPPoE to connect to Internet. Ask your ISP or network administrator for detailed instruction. a. Is the network cable or wireless connection
Edimax IC-3005 | Manual - Page 106
and / or password of SMTP server is correct, if your SMTP server requires authentication (You can try this by click „Send a test Email‟ button). d. Please check log, if FTP upload or Email sending is failed, it will be logged, and this may give you some clue on how to solve the problem. e. Change
Edimax IC-3005 | Manual - Page 107
address to you and you can‟t connect to your IP camera when you‟re away from it, you can follow the following steps to obtain a free Dyndns account, which will provide you free IP address to host name mapping service: 1. Launch your web browser and navigate to http://www.dyndns.org 2. Click „Sign In
Edimax IC-3005 | Manual - Page 108
3. Click „Create an Account‟ in pop-up menu. 4. Fill all fields appear in this menu, and click „Create Account‟ button to create a new account. You‟ll be prompted if the account you selected is not available. 108
Edimax IC-3005 | Manual - Page 109
5. When you see this image, you‟ll receive an e-mail confirmation at the e-mail box you registered with dyndns.org. 6. Check your e-mail box and you should be able to get confirmation e-mail. Click the link to connect to dyndns.org website and complete registration procedure. If you didn‟t get the
Edimax IC-3005 | Manual - Page 110
7. When you see „Account Confirmed‟ webpage, indicates your dyndns.org account has been confirmed and activated. Now you can click „Create a dynamic DNS host within our Free domains‟ link to continue. 8. Click „Create Hostname‟ button. 110
Edimax IC-3005 | Manual - Page 111
the hostname of your choice in „Hostname‟ field, Select a domain name in dropdown menu, Select „Host with IP address‟ for „Service Type‟, Input current IP address in „IP Address‟ field (or click the link below to use detected IP address to fill this field‟. 10. Click „Add to cart‟ continue. 111
Edimax IC-3005 | Manual - Page 112
. 12. Click „Activate Services‟ to continue. 13. When you see this message, indicates your free dyndns.org hostname mapping service has been activated. You can go to chapter 2-2-3 to use your dyndns.org username, password, and hostname + domain name to locate your IP camera on Internet even you‟re
Edimax IC-3005 | Manual - Page 113
IPCAM can work with them. These instructions are based on a commonly-available residential router and these setup techniques should be easy to apply on any other similar devices as well. 5.3.1 Setup Dyndns Dynamic IP address Mapping 1. Go to your router‟s setup page, and locate „DDNS‟, „Dynamic DNS
Edimax IC-3005 | Manual - Page 114
, and locate „NAT‟, „Firewall‟, „Port Mapping‟, „Port Forwarding‟, or similar setup item. 2. Enable this function, and fill IP CAM‟s IP address in „Private IP‟ (or similar field), select „TCP‟ or „BOTH‟ as data type, and input these port numbers for the services you wish to access from Internet: 114
Edimax IC-3005 | Manual - Page 115
to change the port forwarding setting for your router accordingly. 3. If IP CAM is the only one service you wish to access from Internet, you can also use „DMZ‟ function to access IP CAM: Simply fill the IP address of IP CAM and you can access IP CAM from the IP address of your router directly. 115
Edimax IC-3005 | Manual - Page 116
116

Match case Limit results 1 per page