Edimax IC-3030 Manual

Edimax IC-3030 Manual

Get Edimax IC-3030 PDF manuals and user guides View all Edimax IC-3030 manuals
Add to My Manuals
Save this manual to your list of manuals

Edimax IC-3030 manual content summary:

  • Edimax IC-3030 | Manual - Page 1
    1
  • Edimax IC-3030 | Manual - Page 2
    Detailed description: - Health purposes: Users can pass through the Internet (from anywhere) to control the product (IP Camera). It's intended to watch and need not comply with the (EC) No 1275 Standby and on/off mode function of Implementing Measurement. We will keep up to the newest Implementing
  • Edimax IC-3030 | Manual - Page 3
    cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Further, this company to the User Manual on the CD-ROM. The software and specifications are subject to change without notice. Please visit our web site www.edimax.com
  • Edimax IC-3030 | Manual - Page 4
    Package Contents 5 1.2 Basic Introduction 6 1.3 Product Highlights 7 1.4 Familiar with Key Components 8 1.5 Camera Installation 14 1.6 Locate the IP Address of this IP Camera 15 1.7 Using Camera Admin Software to Locate Camera 19 1.8 Log Onto Web Management Interface 25 Chapter II: Using Web
  • Edimax IC-3030 | Manual - Page 5
    80 3-1 Installing IP Camera Surveillance Software 80 3-2 Using IP camera surveillance software 84 3-3 Configure IP camera surveillance software 887 3-3-1 Configure cameras 887 3-3-2 General Settings 96 3-4 Change Display Layout 102 3-5 Full-screen mode 105 3-6 Scan 1076 3-7 Zoom-in / Zoom
  • Edimax IC-3030 | Manual - Page 6
    is missing, please contact the dealer of purchase and return the package to claim for missing contents. Item Name 1 IP Camera 2 Detachable Antenna (IC-3030Wn only) 3 Power Adapter 4 Ethernet Cable 5 Driver and User Manual CD-ROM 6 Accessory kit 7 Quick Installation Guide Quantity 1 1 1 1 1 1 1 6
  • Edimax IC-3030 | Manual - Page 7
    series is tailor made to stream live video over your network. You can view the IP camera's video from anywhere on your local computers or via the Internet. Besides, Edimax IC-3030 series features high quality and high frame rate video streaming through advanced video compression. In order to achieve
  • Edimax IC-3030 | Manual - Page 8
    (802.11b / 802.11g / 802.11n, IC-3030Wn only) support. Wireless data encryption (WEP / WPA, IC-3030Wn only) Supports DHCP and PPPoE protocol, you can also assign a fixed IP address to the camera also. Supports Dynamic DNS (used to allocate the IP camera‟s Internet address, when the ISP you‟re using
  • Edimax IC-3030 | Manual - Page 9
    network, this LED will light up. The LED will flash while video is transmitted or received through a wired network. Wireless (IC-3030Wn & IC-3030 only) When the IP Camera is linked to a wireless network, this LED will light up. The LED will flash while video is transmitted or received through
  • Edimax IC-3030 | Manual - Page 10
    Top View IC-3030: USB Port IC-3030Wn: Wireless SMA Connector C IC-3030PoE: 10 SD Card Slot SD Card Slot SD Card Slot
  • Edimax IC-3030 | Manual - Page 11
    Slot Wireless SMA Connector (IC-3030Wn only) Reset to Default / WPS (IC-3030W only) Power Connector Ethernet Connector Audio Connector Accepts SD / SD-HC memory card for image and video storage A standard reverse SMA connector allows any reverse SMA connector antenna to connect to the IP Camera
  • Edimax IC-3030 | Manual - Page 12
    Microphone Built-in microphone for voice pick-up Note: The USB port only works with Edimax USB WiFi adapters. Note: Edimax EW-7711HPn, EW-7711UAn, EW-7711USN, EW-7711UMn & EW-7711UTn 12
  • Edimax IC-3030 | Manual - Page 13
    Back View Name Description Tripod Connector Connects to any standard tripod / camera wall holder. MAC Address Shows the MAC address of this IP camera. Useful when you Label can‟t locate the camera on the network. 13
  • Edimax IC-3030 | Manual - Page 14
    plan to use wireless LAN only. 3. Plug the power adapter to wall socket, and connect the power connector to the power jack located at the bottom of the IP camera. 4. Connect the antenna to the antenna bases, which is located at the top of this IP camera. (IC-3030Wn only) 5. Place the IP camera at
  • Edimax IC-3030 | Manual - Page 15
    1.6 Locate the IP Address of this IP Camera Default IP address of this IP camera is 192.168.2.3. If you wish to assign another IP address to this IP camera, you have to log onto the web configuration interface of the camera first. If the left three fields of the IP address of your computer is not
  • Edimax IC-3030 | Manual - Page 16
    2. Double-click „Network Connections‟ icon. 3. Right-click „Local Area Connection‟, and click „Properties‟. 16
  • Edimax IC-3030 | Manual - Page 17
    4. Select „Internet Protocol (TCP/IP)‟, then click „Properties‟. 17
  • Edimax IC-3030 | Manual - Page 18
    „192.168.2.339‟). In Subnet mask field, please fill „255.255.255.0‟. Please keep all other fields empty, and click „OK‟. If you changed the IP address of this IP camera and you forget it, there are 2 methods to recover it: a. Press and hold the „Reset‟ button located at the bottom of this
  • Edimax IC-3030 | Manual - Page 19
    the instructions given in last chapter, you can use camera admin software to search the camera which is connected to your local area network. The admin software is also capable to locate multiple cameras on your local area network. Follow the simple steps below to run the Install Wizard to guide you
  • Edimax IC-3030 | Manual - Page 20
    3. The system will start the installation procedures. Click „Next‟ to continue installation. 4. You can change the installation folder of IP camera setup software here, click „Browse‟ to select an existing folder, or you can just click „Next‟ to use default installation folder: 20
  • Edimax IC-3030 | Manual - Page 21
    you wish to create desktop icon and / or quick launch icon for camera admin software, please check corresponding box, and click „Next‟ to continue. 6. You will see a brief of all options you selected, click „Install‟ to install camera admin software now, or click „back‟ to back to previous steps to
  • Edimax IC-3030 | Manual - Page 22
    you see this message, the installation of camera admin software is complete. If you wish to launch camera admin software now, keep „Launch IP Cam Admin Utility‟ box checked, and click „Finish‟ to close installation utility. After the camera admin software is launched, all cameras found on your local
  • Edimax IC-3030 | Manual - Page 23
    wish to connect to certain camera by web browser, double-click the IP camera listed here. The camera admin software also provides several functions: Search camera: Click this button to search all cameras on local area network again. Browse camera via web: Select a camera listed above first, and then
  • Edimax IC-3030 | Manual - Page 24
    the password (default: 1234) and click OK to configure the camera‟s network and security setting: In „Lan Setting‟ page, you can configure camera‟s network settings. Select „DHCP‟ to set the camera to obtain an IP address from DHCP server on local area network automatically, and select „Manual IP
  • Edimax IC-3030 | Manual - Page 25
    In „Security‟ page, you can change the camera‟s name and password (user name is always „admin‟ and cannot be changed). You have to input the same password in both „New Password‟ and „Confirm Password‟ field, or you‟ll be prompted to input new password again. Click „OK‟ to save settings or click „
  • Edimax IC-3030 | Manual - Page 26
    launch Internet Explorer and type the IP address of the IP camera in address bar of Internet Explorer. You should be prompted to input the user name and password: Default user name is „admin‟ and password is „1234‟. Click „OK‟ to continue after user name and password has entered. If you are rejected
  • Edimax IC-3030 | Manual - Page 27
    If this is the first time you log onto web management interface, you‟ll be prompted to install ActiveX Plugin: When you see this message, please click „OK‟, and click „Download the latest ActiveX‟ link to download plugin so you can use this camera: Click „Run‟ to download plugin: 27
  • Edimax IC-3030 | Manual - Page 28
    Click „Run‟ to install plugin: Please click „Next‟ button to start installation (click „Next‟ or „Install‟ when you‟re prompted, until installation is complete). 28
  • Edimax IC-3030 | Manual - Page 29
    Click „Finish‟ to complete plugin installation. Now you can go back to web browser, and you should be able to see the image captured by camera (You may need to press F5 or CTRL-R to reload web page). 29
  • Edimax IC-3030 | Manual - Page 30
    : If you see one of these messages (or both): OR Your computer may not have the display capability that this IP camera requires, or you don't have Microsoft DirectX® installed. Please download Microsoft DirectX® from Microsoft's website (http://www.microsoft.com), and try again. In some cases, your
  • Edimax IC-3030 | Manual - Page 31
    Chapter II: Using Web Management Interface 2.1 Camera Settings The first menu after you logged onto web management interface is „Camera‟, and this is the only menu you can see the real-time image from camera. You can always back to this menu by clicking „Camera‟ on the top of web management
  • Edimax IC-3030 | Manual - Page 32
    below: Item Video Type Frequency Flip Mode Brightness / Saturation / Sharpness Volume Description provides different video quality. If the place where this IP camera points to has a (or more) fluorescent light(s), default filename is current date and time). Default directory used to save image file
  • Edimax IC-3030 | Manual - Page 33
    box located at the right of „Snapshot‟ button: Recording Speak to IP Cam Digital Zoom and you‟ll be prompted to select a new directory You can transmit the voice received by your computer‟s microphone to the camera‟s external speaker. Press and hold this button, then speak to the microphone.
  • Edimax IC-3030 | Manual - Page 34
    mode (uses all available space to display the image captured by this camera). 34
  • Edimax IC-3030 | Manual - Page 35
    2.2 Video You can change video-related settings of this IP camera in „Video‟ menu. You can access this menu by clicking „Video‟ on the top of web management interface. There are 4 types of video settings for this IP camera. To set the option of a certain video setting, put mouse cursor on it and its
  • Edimax IC-3030 | Manual - Page 36
    video quality, but requires more network bandwidth. Changes video frame rate. Available options from „30‟ to „1‟, indicates how many video frames this camera will transmit every second. Higher frame rate provides smooth video watching experience and will not lose details of video, but requires more
  • Edimax IC-3030 | Manual - Page 37
    video quality, but requires more network bandwidth. Changes video frame rate. Available options from „30‟ to „1‟, indicates how many video frames this camera will transmit every second. Higher frame rate provides smooth video watching experience and will not lose details of video, but requires more
  • Edimax IC-3030 | Manual - Page 38
    video quality, but requires more network bandwidth. Changes video frame rate. Available options from „30‟ to „1‟, indicates how many video frames this camera will transmit every second. Higher frame rate provides smooth video watching experience and will not lose details of video, but requires more
  • Edimax IC-3030 | Manual - Page 39
    Description Select „Enable‟ to enable on-screen display function (information about this camera will be displayed on camera‟s display image), and select „Disable‟ to disable it. Select „Enable‟ to show camera‟s name on camera‟s display image, select „Disable‟ to hide it. Select „Enable‟ to show
  • Edimax IC-3030 | Manual - Page 40
    -related settings can be found in this menu, and you have to specify TCP/IP parameters in this menu if you want to change IP address, use PPPoE, Dynamic DNS, and activate UPnP function. You can access this click the network setting you wish to set, and then refer to instructions given below: 40
  • Edimax IC-3030 | Manual - Page 41
    2.3.1 LAN You can define IP address and select the port number you wish to use here. 41
  • Edimax IC-3030 | Manual - Page 42
    here. If it‟s not 80, you‟ll have to add „:port' after the IP address / hostname of this IP camera. Enable PPPoE User Name Password MTU For example, if the HTTP port number you specified here is 90 and the IP address of IP camera is 10.20.20.30, then you have to input 'http://10.20
  • Edimax IC-3030 | Manual - Page 43
    performance. Click „Apply‟ to save settings and make the new settings take effect. 43
  • Edimax IC-3030 | Manual - Page 44
    2.3.2 WLAN 44
  • Edimax IC-3030 | Manual - Page 45
    setting in this menu will be given below: Item Wireless Connection Network Type Description Select „Enable‟ to activate wireless network function of this IP camera, select „Disable‟ to disable it. Select the network type of wireless connection. Available options are „Infrastructure‟ (Connect the
  • Edimax IC-3030 | Manual - Page 46
    Networks camera to a wireless access point), and „Adhoc‟ (This IP camera will become a stand-alone wireless network point, other wireless computers / devices can discover this IP camera and connect to it without wireless access point). You can set to „Adhoc‟ when you don‟t have any wireless access
  • Edimax IC-3030 | Manual - Page 47
    -Shared Key WEP Key Length WEP Key Format Default Key WEP Key 1- 4 When you select a wireless access point above, it‟s SSID will be filled Adhoc‟. Displays current wireless authentication mode. You are allowed to select the encryption type correspond to the wireless authentication mode. The Pre-
  • Edimax IC-3030 | Manual - Page 48
    into the WPS enabled access point to establish WPS connection. Click this button and this camera will enter PBC-style WPS connection state for 120 seconds. Please push „Start PBC‟ button on the wireless access point you wish to connect within 120 seconds to establish WPS connection (The remaining
  • Edimax IC-3030 | Manual - Page 49
    this menu will be given below: Item Enable DDNS Provider Host Name User Name Password Description Select „Enable‟ to activate Dynamic DNS function of this IP camera, select „Disable‟ to disable it. Select dynamic DNS service provider here. Only dyndns.org is available currently. Input dynamic DNS
  • Edimax IC-3030 | Manual - Page 50
    ! The descriptions of every setting in this menu will be given below: Item Enable UPnP Description Select „Enable‟ to activate UPnP function of this IP camera, select „Disable‟ to disable it. Click „Apply‟ to save settings and make the new settings take effect. After UPnP function is activated
  • Edimax IC-3030 | Manual - Page 51
    Click the message to open „My Network Places‟, and you‟ll see the IP camera: You can double-click the icon to launch Internet Explorer and log onto IP camera‟s web management interface directly. 51
  • Edimax IC-3030 | Manual - Page 52
    this function: Input the filename here, and click „Apply‟ to save settings, then other users can access the image by this filename with .jpg extension with the camera‟s IP address as prefix. For example, if your camera‟s IP address is „192.168.2.1‟ and the filename you set here is „picture‟, then
  • Edimax IC-3030 | Manual - Page 53
    If you want to watch video captured by this IP camera by your own RTSP (Real Time Streaming Protocol) media player, you can use this function to setup RTSP parameters, so your RTSP-compatible player will be able to receive video data. The descriptions of every setting in this menu will be given
  • Edimax IC-3030 | Manual - Page 54
    will detect the motion in captured image, and take a snapshot when motion is detected. So you can use this camera to keep the safety of the belongings you have. To use motion detection, click the following link from the top of menu: After you selected „
  • Edimax IC-3030 | Manual - Page 55
    interval between two motions from dropdown menu. When a motion is detected, camera will not detect any motion again within the time interval you specified (always detect new motion) to 60 seconds. This option allows the IP cam to capture additional image frames prior to the event. The duration of
  • Edimax IC-3030 | Manual - Page 56
    User Name Password Samba Server Shared Folder Storage File Type Record File Size IP cam automatically. Select the duration you wish this camera folder which supports SAMBA (also known as „Windows Network Neighborhood‟), select „Disable‟ to disable this function. If username and password are not
  • Edimax IC-3030 | Manual - Page 57
    2.4.2 Motion Region You can define the motion detection region within the image that camera captures, so this camera will ignore motions which are not covered by the motion region setting, and reduce the chances of false alarm. The descriptions of every setting in
  • Edimax IC-3030 | Manual - Page 58
    will only detect major changes in the image). In case the objects of the image captured by the camera moved, click this button to reload the image captured by camera, so you can decide the motion detection region more precisely. Save motion detection region settings. To change the motion detection
  • Edimax IC-3030 | Manual - Page 59
    your Email software (like Outlook, Outlook Express etc.), or ask your network administrator or ISP. Input the Email address of mail sender, this will help you to identify the Email sent by this IP camera by sender mail server. Select „Enable‟ if your SMTP server supports SSLv2/v3 such as gmail. 59
  • Edimax IC-3030 | Manual - Page 60
    SMTP server you‟re using in your Email software (like Outlook, Outlook Express etc.), or ask your network administrator or ISP. Please input the user name of SMTP server here, if your SMTP server requires the use of authentication. Please input the password of SMTP server here, if your SMTP server
  • Edimax IC-3030 | Manual - Page 61
    will be given below: Item FTP Server FTP Port User Name Password Remote Folder Description Input the IP address or host name of the FTP server you ‟s root directory. Passive Mode Please ask FTP server‟s administrator to know which folder you should use. Certain user name may have restrictions
  • Edimax IC-3030 | Manual - Page 62
    not working, you can try to use passive mode. Click „Apply‟ to save settings and make the new settings take effect. After that, you can click „Upload a test file‟ to send a file to the
  • Edimax IC-3030 | Manual - Page 63
    of every setting in this menu will be given below: Item Enable Cycle Recording File Name Prefix Destination Folder Description Check this box and this camera will automatically erase oldest image file to make rooms for new image files when SD card is full. If you don‟t want to lose old
  • Edimax IC-3030 | Manual - Page 64
    2.5 System Info You can use this menu to get the operational information of this camera: After you selected „System Info.‟, a sub-menu will appear. There are 6 sub-menus available here: Detailed descriptions of every setting will be given below. 64
  • Edimax IC-3030 | Manual - Page 65
    network. Password Confirm Password Default name begins with „IC-„ plus the last 6 characters of the MAC address of this IP camera. You can modify the name to the one you can remember and meaningful to you, but never give all IP cameras in the same network with same name. Please specify user name
  • Edimax IC-3030 | Manual - Page 66
    change the date and time of the real time clock in this IP camera. You can set the time manually, or use network time protocol (NTP) to set the time Please input the IP address or host name of NTP server here. You can use default value „pool.ntp.org‟, or ask your ISP for the IP address or host
  • Edimax IC-3030 | Manual - Page 67
    ‟. Click to input current time of your computer to „Set Date / Time manually‟ field. Click „Apply‟ to save settings and make the new settings take use the date and time setting of the computer which is connecting to the camera, click „Synchronize to PC time‟ button. The date and time setting of the
  • Edimax IC-3030 | Manual - Page 68
    2.5.3 Schedule You can use this menu to setup Schedule Snapshot/Recording settings: Item Enable FTP Schedule Time Interval File Control Enable E-Mail Description Select „Enable‟ to send the Schedule Snapshot to the appointed FTP server, or select ‟Disable‟ to disable this function. You have to
  • Edimax IC-3030 | Manual - Page 69
    according to the time interval you wish. Select „Enable‟ to enable schedule recording, or select „Disable‟ to disable this function. This option allows the IP camera to send one recording file according to the time interval you wish. This option allows you to adjust the recoding time based on your
  • Edimax IC-3030 | Manual - Page 70
    invalid of you didn‟t provide the firmware file, you‟ll be prompted to select another valid firmware file again. Reset to Factory Defaults The IP camera will reboot after the upgrade procedure is done. PLEASE NOTE THAT THE IP ADDRESS OF THE CAMERA WILL RESET TO DEFAULT VALUE: 192.168.2.3 Clear all
  • Edimax IC-3030 | Manual - Page 71
    is not '255.255.255.0', or you'll not be able to connect to this IP camera again. If you found the IP camera is responding slowly or behaves strange, you can click this button to try to reboot the IP camera, this may help. Click „Turn off LED light‟ button to switch the LED light
  • Edimax IC-3030 | Manual - Page 72
    2.5.5 Status This menu provides all information about this IP camera, like firmware version, system uptime, date / time, and network information. 72
  • Edimax IC-3030 | Manual - Page 73
    2.5.6 System Log All activities of this IP camera will be logged, and you are allowed to enter „System Log‟ menu to view these logs. 73
  • Edimax IC-3030 | Manual - Page 74
    view the live image captured by this camera, but don‟t want to allow them to modify system settings, you can give them user-level user name and password, so they can only view the image and can not change any system setting. This camera supports up to 16 users. After you selected „Account‟, you‟ll
  • Edimax IC-3030 | Manual - Page 75
    new settings take effect. Please note: only one user (including administrator) will be able to view the image of IP camera at the same time. If you wish to allow other people to view the live image captured by this IP camera without typing User name/Password, you can enable "Anonymous Login" in
  • Edimax IC-3030 | Manual - Page 76
    2.7 SDHC After you selected „System Info.‟, a sub-menu will appear. There are 4 sub-menus available here: Please click the SD card setting you wish to set, then refer to instructions given below: 76
  • Edimax IC-3030 | Manual - Page 77
    2.7.1 Status Here shows the remaining card space for you. 77
  • Edimax IC-3030 | Manual - Page 78
    When you‟re using SD card to store captured image and video clip, you can have this camera to send an E-mail to you when there‟s only little remaining space left on SD card. set port number according to your mail server. Select „Enable‟ if your SMTP server supports SSLv2/v3 such as gmail. 78
  • Edimax IC-3030 | Manual - Page 79
    who has the mail account. This setting is necessary when the SMTP server which sends e-mails performs authentication. Type the password of the user who has the mail account. This setting is necessary when the SMTP server which sends e-mails performs authentication. Select the amount of SD card space
  • Edimax IC-3030 | Manual - Page 80
    2.7.3 File Management You can use this menu to manage the files stored on SD card. The descriptions of every setting in this menu will be given below: Item FirstPage PrevPage NextPage LastPage SelectAll ClearAll Delete Description Jump to first page of file list. Jump to previous page of file
  • Edimax IC-3030 | Manual - Page 81
    Surveillance Software 3-1 Installing IP Camera Surveillance Software The IP camera surveillance software provides various functions like video recording, after this software is installed, you can use your IP camera to safeguard your property. Please follow the following instructions to install the
  • Edimax IC-3030 | Manual - Page 82
    3. If you need installation program to create a desktop icon or a quick launch icon for you, click all items you need here, than click „Next‟ to continue. 82
  • Edimax IC-3030 | Manual - Page 83
    4. Here lists all options you chose in previous steps, if everything‟s correct, click „Install‟ to start installing procedure, or click „Back‟ to go back to previous step to modify installing settings. 5. The installing procedure will take some time, please be patient. 83
  • Edimax IC-3030 | Manual - Page 84
    6. When you see this window, it means the software installing procedure is complete. Please click „Finish‟ to finish the procedure (IP camera surveillance software will start after you click „Finish‟ button, if you want to start it later, uncheck „Launch IPCam Surveillance Software‟ box). 84
  • Edimax IC-3030 | Manual - Page 85
    bar, or start menu to start the IP camera surveillance software. Before you start: IP camera surveillance software will only work when your monitor's resolution is '1024 x 768'. Please change the resolution before you use IP camera surveillance software, or it won't start. Here are descriptions
  • Edimax IC-3030 | Manual - Page 86
    to change the direction that camera points to. This function is only available for supported cameras. Click this button to return the camera to „Home‟ (default) position. This function is only available for supported cameras. Start video recording. Configure Software / camera configuration. 86
  • Edimax IC-3030 | Manual - Page 87
    window (stop surveillance) Displays all system messages like camera is disconnected etc. Terminates IP camera surveillance software. Minimize window Minimizes IP camera surveillance software window. Video displaying Displays the image of all cameras by the display layout area you selected. 87
  • Edimax IC-3030 | Manual - Page 88
    3-3 Configure IP camera surveillance software 3-3-1 Configure cameras Before you use this IP camera surveillance software, you must configure the camera(s) you wish to connect. Please click „System configure‟ button and a popup menu will appear: Please select „Configure Cameras‟ to configure cameras
  • Edimax IC-3030 | Manual - Page 89
    local network. If you didn‟t see the camera you expected in „Camera Search‟ box, or new cameras has been joined to your local network after last scan. Input the name of camera here. Default value is the first 6 bytes of camera‟s MAC address, you can change the name of camera so you can remember the
  • Edimax IC-3030 | Manual - Page 90
    IP* Input the IP address of camera. Username* Input the user name of camera. Web Port* Input the web port of the camera. By default it‟s „80‟. Password Input the password of camera. Default value is „1234‟. You should change the password if you changed the password of selected camera.
  • Edimax IC-3030 | Manual - Page 91
    3-3-1-2 Schedule Recording In this tab, you can setup scheduled video recording, so you can record the video captured by all cameras you have by a pre-defined schedule. Here are the descriptions of all setting items: Item Channel One Time Schedules New (One Time Schedules) Description Select
  • Edimax IC-3030 | Manual - Page 92
    Edit Delete New (Weekly Schedules) Please specify the time duration of this one-time schedule (the date and time of „From‟ and „To‟), then click „OK‟ to save settings. Please note you must set a schedule that will be happened in the future, you can not set a schedule in the past. You can modify a
  • Edimax IC-3030 | Manual - Page 93
    Edit Delete OK Cancel Please check all weekdays that applies, and set the start time in „From‟ field. You can set the duration of video recording in „Period‟ field (format is HH:MM:SS), and the end time will be calculated automatically and displayed in „To‟ field. You can also click „All Time
  • Edimax IC-3030 | Manual - Page 94
    channel number you wish to set. Check this box and the IP camera surveillance software will not play the audio captured by this camera. Check this box and the IP camera surveillance software will not record the audio captured by this camera. Save settings in this tab. Discard all settings in this
  • Edimax IC-3030 | Manual - Page 95
    concerned, it's not recommended to use this function since some tiny changes you may need to know may not be able to trigger the camera and the camera will not start recording. Here are the descriptions of all setting items: Item Channel Enable Disable Recording Time Invoke alarm when motion is
  • Edimax IC-3030 | Manual - Page 96
    motion is triggered OK Cancel has been detected by the camera. Save settings in this tab. Discard all settings in this tab. 96
  • Edimax IC-3030 | Manual - Page 97
    3-3-2 General Settings You can set system-wide settings of this IP camera surveillance software in this menu. 3-3-2-1 „General‟ tab All general settings like file storage directory and recording spaces can be set here. Here are the descriptions of all
  • Edimax IC-3030 | Manual - Page 98
    Scan Time Cycle Recording Define the time period to pause between every camera switch when you activate „Scan‟ function. You can decide the behavior when hard disk space is full: OK Cancel Disable: Do not overwrite recorded video
  • Edimax IC-3030 | Manual - Page 99
    3-3-2-2 „E-Mail Setting‟ tab If you want to use motion detection function and wish to get an email that contains the image captured by the camera, please setup your email related parameters here first. Here are the descriptions of all setting items: Item E-Mail Subject Recipient E-Mail Address New
  • Edimax IC-3030 | Manual - Page 100
    ‟t know which SMTP server you should use, please refer to the setting of your email software or ask your ISP / network administrator. Specify the port number of the SMTP server you wish to use here. By default (and the setting of most of SMTP servers) it‟s „25‟. Select „Enable‟ if your SMTP
  • Edimax IC-3030 | Manual - Page 101
    Security If you don‟t want other people to access this IP camera surveillance software, you can set a password to protect it. You‟ll need to input the password every time you wish to use this IP camera surveillance software: To set password, please use „Security‟ tab in „General Options‟ menu: 101
  • Edimax IC-3030 | Manual - Page 102
    authentication when this software starts. Password authentication is not required when this software starts. Input the password you wish to use here. Input the password you wish to use here again. 3-3-2-4 About This tab shows the version number of the IP camera surveillance software you‟re using
  • Edimax IC-3030 | Manual - Page 103
    3-4 Change Display Layout This IP camera surveillance software provides 8 kinds of display layout: Every layout displays different number of camera and camera arrangement, you can click the icon that presents a specific kind of layout, and the video displaying area will change accordingly. Layout
  • Edimax IC-3030 | Manual - Page 104
    Layout style 3: 6 Displays the video of up to 6 cameras. Cameras Layout style 4: 8 Displays the video of up to 8 cameras. Cameras Layout style 5: 9 Displays the video of up to 9 cameras. Cameras Layout style 6: Displays the video of up to 10 cameras. 10 Cameras 104
  • Edimax IC-3030 | Manual - Page 105
    Layout style 7: 13 Displays the video of up to 13 cameras. Cameras Layout style 8: 16 Displays the video of up to 16 cameras. Cameras 105
  • Edimax IC-3030 | Manual - Page 106
    3-5 Full-screen mode If you want to use all available spaces on your monitor to display surveillance image, you can click „Full Screen‟ button to switch display mode to full-screen mode. To exit full-screen mode, press „ESC‟ key. 106
  • Edimax IC-3030 | Manual - Page 107
    3-6 Scan If you have more than one camera configured, and you wish to switch the displaying image between cameras, you can click „Scan‟ button to switch between all configured cameras. NOTE: If a camera is configured but disconnected, it will still be displayed in a scan sequence (you'll see nothing
  • Edimax IC-3030 | Manual - Page 108
    3-7 Zoom-in / Zoom-out For cameras that support zoom-in / zoom-out function, you can use this function to see more objects that fall in the scope of camera‟s view, or enlarge the image size of a certain object to see its detail. Please select a camera in video displaying area by clicking on its
  • Edimax IC-3030 | Manual - Page 109
    pan - tilt function ( but this model doesn‟t support PTZ function), you can change the position that camera points to, to see different places that fall in the scope of camera‟s view. Please select a camera in video displaying area by clicking on its image, and then click the directions you wish
  • Edimax IC-3030 | Manual - Page 110
    3-9 Snapshot You can take a snapshot of selected camera and save it to „Snapshot‟ sub-folder of pre-defined data directory. Click snapshot button once to take a snapshot; you can take as much snapshot as you want before hard disk is full. 110
  • Edimax IC-3030 | Manual - Page 111
    „Start Recording‟ button: When recording starts, you‟ll see a message displayed in message displaying box like „1/1 10:00:00, Camera 2 Start Manual‟, which means camera 1 starts recording manually on 1/1 at 10:00:00. To stop recording, click „Start Recording‟ button again, and you‟ll see a message
  • Edimax IC-3030 | Manual - Page 112
    3-11 Video Playback You can playback all recorded video by clicking this button. A new window will appear: You have to search the video file before you can play it. There are two kinds of video search: Time Search (search all videos file that falls in a specific period of time) and Motion Search (
  • Edimax IC-3030 | Manual - Page 113
    Chapter V: How to View IP Camera over the Internet with iPhone IC-3030 series features iPhone support for iPhone users to monitor their home using Edimax IP-Cameras. Please check following instruction for installation. The following instruction applies to all Edimax routers Step1: Ensure My-PC is
  • Edimax IC-3030 | Manual - Page 114
    DNS account in the http://www.dyndns.org " In this guide, we assume you have already got http://my-name.dyndns.org. (yours may vary) and go to Step 3. Step 3: Configure the 1st Camera based on the following: Configure the 2nd Camera based on the following: 114
  • Edimax IC-3030 | Manual - Page 115
    Configure the Broadband Router based on the following: 115
  • Edimax IC-3030 | Manual - Page 116
    (1) Make sure Internet connection is ok with iPhone and click "Safari" (2) Enter the IP address of your router‟s "fixed and public IP address" (check the Step 2 for details) Note: "/ipcam.asp" is needed If no fixed and public IP address is given by your ISP, you may enter a link like http://my-name
  • Edimax IC-3030 | Manual - Page 117
    (3) Enter user name & password for the Edimax IP camera. By default, user name is admin and password is 1234 (4) Let‟s add the 1st IP camera. Click first window and Setting. 117
  • Edimax IC-3030 | Manual - Page 118
    (5) Click "Add" when finishing the following configuration: (6) Click "Add" when finishing the following configuration for the 2nd IP camera 118
  • Edimax IC-3030 | Manual - Page 119
    (7) Configuration is complete. You could see the live video of the 2nd IP camera. 119
  • Edimax IC-3030 | Manual - Page 120
    802.11b/g/n (*IC-3030Wn only) LED Indicator: LAN/Wireless/Power for IC-3030 and IC-3030Wn LAN/Power for IC-3030PoE HTTP/Utility Supports H.264, MPEG4 and M-JPEG Triple mode video streaming Features multi-area motion detection and snapshot to E-mail and FTP Features Manual Focus Lens Supports up to
  • Edimax IC-3030 | Manual - Page 121
    Supports Windows 2000/XP/Vista/7 Firmware upgradable EMI & Safety FCC, CE class B 121
  • Edimax IC-3030 | Manual - Page 122
    IP address. However, this is not a workable solution. To overcome this problem, an Internet service called DDNS is designed to help you trace the log of the changing IP http://your-name.dyndns.org in the iPhone can find out the 2 IP camera at My-home. The following are steps to apply for an account
  • Edimax IC-3030 | Manual - Page 123
    First, go to http://www.dyndns.org and apply for an account. And follow the steps: Now, you could locate your home IP camera using http://your-name.dyndns.org 123
  • Edimax IC-3030 | Manual - Page 124
    124
  • Edimax IC-3030 | Manual - Page 125
    the dealer of purchase for help, please check the troubleshooting list here, this may help you to solve the problem by yourself and therefore saves your valuable time. Scenario I cannot connect to IP camera Possible Solution a. Please confirm the IP address setting of the computer you‟re using. If
  • Edimax IC-3030 | Manual - Page 126
    network administrator for detailed instruction. a. Is the network cable or wireless connection disconnected? Please check it. b. Unplug the power adapter from wall socket and plug it in again after 10 seconds, then try to connect to the IP camera again. c. If IP camera is correctly powered („Power
  • Edimax IC-3030 | Manual - Page 127
    IP camera file‟ button). c. Make sure the user name and / or password of SMTP server is correct, if your problem. e. Change the threshold to a more sensitive setting. I heard strange a. Please check if anything jams the camera, remove sound when I use it. pan / tilt function a. If the camera
  • Edimax IC-3030 | Manual - Page 128
    Satellite Earth Station Equipment) As of April 8, 2000. Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All
  • Edimax IC-3030 | Manual - Page 129
    129
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
1